diff --git a/.github/workflows/test-builds.yml b/.github/workflows/test-builds.yml
index 7b7052e0e1..5a598299f3 100644
--- a/.github/workflows/test-builds.yml
+++ b/.github/workflows/test-builds.yml
@@ -89,6 +89,7 @@ jobs:
- mks_robin_nano35_stm32
- NUCLEO_F767ZI
- REMRAM_V1
+ - BTT_SKR_SE_BX
# Put lengthy tests last
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 0847892934..1022dd54dd 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -2496,6 +2496,11 @@
//
//#define ANET_ET5_TFT35
+//
+// 1024x600, 7", RGB Stock Display from BIQU-BX
+//
+//#define BIQU_BX_TFT70
+
//
// Generic TFT with detailed options
//
diff --git a/Marlin/src/HAL/STM32/MarlinSPI.cpp b/Marlin/src/HAL/STM32/MarlinSPI.cpp
index 5086b41784..896ec1433f 100644
--- a/Marlin/src/HAL/STM32/MarlinSPI.cpp
+++ b/Marlin/src/HAL/STM32/MarlinSPI.cpp
@@ -19,7 +19,7 @@
* along with this program. If not, see .
*
*/
-#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
+#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(STM32H7xx)
#include "MarlinSPI.h"
diff --git a/Marlin/src/HAL/STM32/inc/SanityCheck.h b/Marlin/src/HAL/STM32/inc/SanityCheck.h
index 7ee606af7f..12ff2abec7 100644
--- a/Marlin/src/HAL/STM32/inc/SanityCheck.h
+++ b/Marlin/src/HAL/STM32/inc/SanityCheck.h
@@ -52,6 +52,6 @@
#error "SERIAL_STATS_DROPPED_RX is not supported on STM32."
#endif
-#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) && NOT_TARGET(STM32F4xx, STM32F1xx)
- #error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_UI are currently only supported on STM32F4 and STM32F1 hardware."
+#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) && NOT_TARGET(STM32H7xx, STM32F4xx, STM32F1xx)
+ #error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_UI are currently only supported on STM32H7, STM32F4 and STM32F1 hardware."
#endif
diff --git a/Marlin/src/HAL/STM32/tft/tft_ltdc.cpp b/Marlin/src/HAL/STM32/tft/tft_ltdc.cpp
new file mode 100644
index 0000000000..6039593f46
--- /dev/null
+++ b/Marlin/src/HAL/STM32/tft/tft_ltdc.cpp
@@ -0,0 +1,390 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
+
+#include "../../../inc/MarlinConfig.h"
+
+#if HAS_LTDC_TFT
+
+#include "tft_ltdc.h"
+#include "pinconfig.h"
+
+#define FRAME_BUFFER_ADDRESS 0XC0000000 // SDRAM address
+
+#define SDRAM_TIMEOUT ((uint32_t)0xFFFF)
+#define REFRESH_COUNT ((uint32_t)0x02A5) // SDRAM refresh counter
+
+#define SDRAM_MODEREG_BURST_LENGTH_1 ((uint16_t)0x0000)
+#define SDRAM_MODEREG_BURST_LENGTH_2 ((uint16_t)0x0001)
+#define SDRAM_MODEREG_BURST_LENGTH_4 ((uint16_t)0x0002)
+#define SDRAM_MODEREG_BURST_LENGTH_8 ((uint16_t)0x0004)
+#define SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL ((uint16_t)0x0000)
+#define SDRAM_MODEREG_BURST_TYPE_INTERLEAVED ((uint16_t)0x0008)
+#define SDRAM_MODEREG_CAS_LATENCY_2 ((uint16_t)0x0020)
+#define SDRAM_MODEREG_CAS_LATENCY_3 ((uint16_t)0x0030)
+#define SDRAM_MODEREG_OPERATING_MODE_STANDARD ((uint16_t)0x0000)
+#define SDRAM_MODEREG_WRITEBURST_MODE_PROGRAMMED ((uint16_t)0x0000)
+#define SDRAM_MODEREG_WRITEBURST_MODE_SINGLE ((uint16_t)0x0200)
+
+
+void SDRAM_Initialization_Sequence(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command) {
+
+ __IO uint32_t tmpmrd =0;
+ /* Step 1: Configure a clock configuration enable command */
+ Command->CommandMode = FMC_SDRAM_CMD_CLK_ENABLE;
+ Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
+ Command->AutoRefreshNumber = 1;
+ Command->ModeRegisterDefinition = 0;
+ /* Send the command */
+ HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
+
+ /* Step 2: Insert 100 us minimum delay */
+ /* Inserted delay is equal to 1 ms due to systick time base unit (ms) */
+ HAL_Delay(1);
+
+ /* Step 3: Configure a PALL (precharge all) command */
+ Command->CommandMode = FMC_SDRAM_CMD_PALL;
+ Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
+ Command->AutoRefreshNumber = 1;
+ Command->ModeRegisterDefinition = 0;
+ /* Send the command */
+ HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
+
+ /* Step 4 : Configure a Auto-Refresh command */
+ Command->CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE;
+ Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
+ Command->AutoRefreshNumber = 8;
+ Command->ModeRegisterDefinition = 0;
+ /* Send the command */
+ HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
+
+ /* Step 5: Program the external memory mode register */
+ tmpmrd = (uint32_t)(SDRAM_MODEREG_BURST_LENGTH_1 |
+ SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL |
+ SDRAM_MODEREG_CAS_LATENCY_2 |
+ SDRAM_MODEREG_OPERATING_MODE_STANDARD |
+ SDRAM_MODEREG_WRITEBURST_MODE_SINGLE);
+
+ Command->CommandMode = FMC_SDRAM_CMD_LOAD_MODE;
+ Command->CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
+ Command->AutoRefreshNumber = 1;
+ Command->ModeRegisterDefinition = tmpmrd;
+ /* Send the command */
+ HAL_SDRAM_SendCommand(hsdram, Command, SDRAM_TIMEOUT);
+
+ /* Step 6: Set the refresh rate counter */
+ /* Set the device refresh rate */
+ HAL_SDRAM_ProgramRefreshRate(hsdram, REFRESH_COUNT);
+}
+
+void SDRAM_Config() {
+
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+ __HAL_RCC_FMC_CLK_ENABLE();
+
+ SDRAM_HandleTypeDef hsdram;
+ FMC_SDRAM_TimingTypeDef SDRAM_Timing;
+ FMC_SDRAM_CommandTypeDef command;
+
+ /* Configure the SDRAM device */
+ hsdram.Instance = FMC_SDRAM_DEVICE;
+ hsdram.Init.SDBank = FMC_SDRAM_BANK1;
+ hsdram.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_9;
+ hsdram.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_13;
+ hsdram.Init.MemoryDataWidth = FMC_SDRAM_MEM_BUS_WIDTH_16;
+ hsdram.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
+ hsdram.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_2;
+ hsdram.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
+ hsdram.Init.SDClockPeriod = FMC_SDRAM_CLOCK_PERIOD_2;
+ hsdram.Init.ReadBurst = FMC_SDRAM_RBURST_ENABLE;
+ hsdram.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
+
+ /* Timing configuration for 100Mhz as SDRAM clock frequency (System clock is up to 200Mhz) */
+ SDRAM_Timing.LoadToActiveDelay = 2;
+ SDRAM_Timing.ExitSelfRefreshDelay = 8;
+ SDRAM_Timing.SelfRefreshTime = 6;
+ SDRAM_Timing.RowCycleDelay = 6;
+ SDRAM_Timing.WriteRecoveryTime = 2;
+ SDRAM_Timing.RPDelay = 2;
+ SDRAM_Timing.RCDDelay = 2;
+
+ /* Initialize the SDRAM controller */
+ if (HAL_SDRAM_Init(&hsdram, &SDRAM_Timing) != HAL_OK)
+ {
+ /* Initialization Error */
+ }
+
+ /* Program the SDRAM external device */
+ SDRAM_Initialization_Sequence(&hsdram, &command);
+}
+
+void LTDC_Config() {
+
+ __HAL_RCC_LTDC_CLK_ENABLE();
+ __HAL_RCC_DMA2D_CLK_ENABLE();
+
+ RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
+
+ /* The PLL3R is configured to provide the LTDC PCLK clock */
+ /* PLL3_VCO Input = HSE_VALUE / PLL3M = 25Mhz / 5 = 5 Mhz */
+ /* PLL3_VCO Output = PLL3_VCO Input * PLL3N = 5Mhz * 160 = 800 Mhz */
+ /* PLLLCDCLK = PLL3_VCO Output/PLL3R = 800Mhz / 16 = 50Mhz */
+ /* LTDC clock frequency = PLLLCDCLK = 50 Mhz */
+ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LTDC;
+ PeriphClkInitStruct.PLL3.PLL3M = 5;
+ PeriphClkInitStruct.PLL3.PLL3N = 160;
+ PeriphClkInitStruct.PLL3.PLL3FRACN = 0;
+ PeriphClkInitStruct.PLL3.PLL3P = 2;
+ PeriphClkInitStruct.PLL3.PLL3Q = 2;
+ PeriphClkInitStruct.PLL3.PLL3R = (800 / LTDC_LCD_CLK);
+ PeriphClkInitStruct.PLL3.PLL3VCOSEL = RCC_PLL3VCOWIDE;
+ PeriphClkInitStruct.PLL3.PLL3RGE = RCC_PLL3VCIRANGE_2;
+ HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
+
+ LTDC_HandleTypeDef hltdc_F;
+ LTDC_LayerCfgTypeDef pLayerCfg;
+
+ /* LTDC Initialization -------------------------------------------------------*/
+
+ /* Polarity configuration */
+ /* Initialize the horizontal synchronization polarity as active low */
+ hltdc_F.Init.HSPolarity = LTDC_HSPOLARITY_AL;
+ /* Initialize the vertical synchronization polarity as active low */
+ hltdc_F.Init.VSPolarity = LTDC_VSPOLARITY_AL;
+ /* Initialize the data enable polarity as active low */
+ hltdc_F.Init.DEPolarity = LTDC_DEPOLARITY_AL;
+ /* Initialize the pixel clock polarity as input pixel clock */
+ hltdc_F.Init.PCPolarity = LTDC_PCPOLARITY_IPC;
+
+ /* Timing configuration */
+ hltdc_F.Init.HorizontalSync = (LTDC_LCD_HSYNC - 1);
+ hltdc_F.Init.VerticalSync = (LTDC_LCD_VSYNC - 1);
+ hltdc_F.Init.AccumulatedHBP = (LTDC_LCD_HSYNC + LTDC_LCD_HBP - 1);
+ hltdc_F.Init.AccumulatedVBP = (LTDC_LCD_VSYNC + LTDC_LCD_VBP - 1);
+ hltdc_F.Init.AccumulatedActiveH = (TFT_HEIGHT + LTDC_LCD_VSYNC + LTDC_LCD_VBP - 1);
+ hltdc_F.Init.AccumulatedActiveW = (TFT_WIDTH + LTDC_LCD_HSYNC + LTDC_LCD_HBP - 1);
+ hltdc_F.Init.TotalHeigh = (TFT_HEIGHT + LTDC_LCD_VSYNC + LTDC_LCD_VBP + LTDC_LCD_VFP - 1);
+ hltdc_F.Init.TotalWidth = (TFT_WIDTH + LTDC_LCD_HSYNC + LTDC_LCD_HBP + LTDC_LCD_HFP - 1);
+
+ /* Configure R,G,B component values for LCD background color : all black background */
+ hltdc_F.Init.Backcolor.Blue = 0;
+ hltdc_F.Init.Backcolor.Green = 0;
+ hltdc_F.Init.Backcolor.Red = 0;
+
+ hltdc_F.Instance = LTDC;
+
+/* Layer0 Configuration ------------------------------------------------------*/
+
+ /* Windowing configuration */
+ pLayerCfg.WindowX0 = 0;
+ pLayerCfg.WindowX1 = TFT_WIDTH;
+ pLayerCfg.WindowY0 = 0;
+ pLayerCfg.WindowY1 = TFT_HEIGHT;
+
+ /* Pixel Format configuration*/
+ pLayerCfg.PixelFormat = LTDC_PIXEL_FORMAT_RGB565;
+
+ /* Start Address configuration : frame buffer is located at SDRAM memory */
+ pLayerCfg.FBStartAdress = (uint32_t)(FRAME_BUFFER_ADDRESS);
+
+ /* Alpha constant (255 == totally opaque) */
+ pLayerCfg.Alpha = 255;
+
+ /* Default Color configuration (configure A,R,G,B component values) : no background color */
+ pLayerCfg.Alpha0 = 0; /* fully transparent */
+ pLayerCfg.Backcolor.Blue = 0;
+ pLayerCfg.Backcolor.Green = 0;
+ pLayerCfg.Backcolor.Red = 0;
+
+ /* Configure blending factors */
+ pLayerCfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_CA;
+ pLayerCfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_CA;
+
+ /* Configure the number of lines and number of pixels per line */
+ pLayerCfg.ImageWidth = TFT_WIDTH;
+ pLayerCfg.ImageHeight = TFT_HEIGHT;
+
+ /* Configure the LTDC */
+ if (HAL_LTDC_Init(&hltdc_F) != HAL_OK)
+ {
+ /* Initialization Error */
+ }
+
+ /* Configure the Layer*/
+ if (HAL_LTDC_ConfigLayer(&hltdc_F, &pLayerCfg, 0) != HAL_OK)
+ {
+ /* Initialization Error */
+ }
+}
+
+uint16_t TFT_LTDC::x_min = 0;
+uint16_t TFT_LTDC::x_max = 0;
+uint16_t TFT_LTDC::y_min = 0;
+uint16_t TFT_LTDC::y_max = 0;
+uint16_t TFT_LTDC::x_cur = 0;
+uint16_t TFT_LTDC::y_cur = 0;
+uint8_t TFT_LTDC::reg = 0;
+volatile uint16_t* TFT_LTDC::framebuffer = (volatile uint16_t* )FRAME_BUFFER_ADDRESS;
+
+void TFT_LTDC::Init() {
+
+ // SDRAM pins init
+ for (uint16_t i = 0; PinMap_SDRAM[i].pin != NC; i++)
+ pinmap_pinout(PinMap_SDRAM[i].pin, PinMap_SDRAM);
+
+ // SDRAM peripheral config
+ SDRAM_Config();
+
+ // LTDC pins init
+ for (uint16_t i = 0; PinMap_LTDC[i].pin != NC; i++)
+ pinmap_pinout(PinMap_LTDC[i].pin, PinMap_LTDC);
+
+ // LTDC peripheral config
+ LTDC_Config();
+}
+
+uint32_t TFT_LTDC::GetID() {
+ return 0xABAB;
+}
+
+uint32_t TFT_LTDC::ReadID(tft_data_t Reg) {
+ return 0xABAB;
+}
+
+bool TFT_LTDC::isBusy() {
+ return false;
+}
+
+uint16_t TFT_LTDC::ReadPoint(uint16_t x, uint16_t y) {
+ return framebuffer[(TFT_WIDTH * y) + x];
+}
+
+void TFT_LTDC::DrawPoint(uint16_t x, uint16_t y, uint16_t color) {
+ framebuffer[(TFT_WIDTH * y) + x] = color;
+}
+
+void TFT_LTDC::DrawRect(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t color) {
+
+ if (sx == ex || sy == ey) return;
+
+ uint16_t offline = TFT_WIDTH - (ex - sx);
+ uint32_t addr = (uint32_t)&framebuffer[(TFT_WIDTH * sy) + sx];
+
+ DMA2D->CR &= ~(1 << 0);
+ DMA2D->CR = 3 << 16;
+ DMA2D->OPFCCR = 0X02;
+ DMA2D->OOR = offline;
+ DMA2D->OMAR = addr;
+ DMA2D->NLR = (ey - sy) | ((ex - sx) << 16);
+ DMA2D->OCOLR = color;
+ DMA2D->CR |= 1<<0;
+
+ uint32_t timeout = 0;
+ while((DMA2D->ISR & (1<<1)) == 0)
+ {
+ timeout++;
+ if(timeout>0X1FFFFF)break;
+ }
+ DMA2D->IFCR |= 1<<1;
+}
+
+void TFT_LTDC::DrawImage(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t *colors) {
+
+ if (sx == ex || sy == ey) return;
+
+ uint16_t offline = TFT_WIDTH - (ex - sx);
+ uint32_t addr = (uint32_t)&framebuffer[(TFT_WIDTH * sy) + sx];
+
+ DMA2D->CR &= ~(1 << 0);
+ DMA2D->CR = 0 << 16;
+ DMA2D->FGPFCCR = 0X02;
+ DMA2D->FGOR = 0;
+ DMA2D->OOR = offline;
+ DMA2D->FGMAR = (uint32_t)colors;
+ DMA2D->OMAR = addr;
+ DMA2D->NLR = (ey - sy) | ((ex - sx) << 16);
+ DMA2D->CR |= 1<<0;
+
+ uint32_t timeout = 0;
+ while((DMA2D->ISR & (1<<1)) == 0)
+ {
+ timeout++;
+ if(timeout>0X1FFFFF)break;
+ }
+ DMA2D->IFCR |= 1<<1;
+}
+
+void TFT_LTDC::WriteData(uint16_t data) {
+ switch (reg) {
+ case 0x01: x_cur = x_min = data; return;
+ case 0x02: x_max = data; return;
+ case 0x03: y_cur = y_min = data; return;
+ case 0x04: y_max = data; return;
+ }
+ Transmit(data);
+}
+
+void TFT_LTDC::Transmit(tft_data_t Data) {
+ DrawPoint(x_cur, y_cur, Data);
+ x_cur++;
+ if (x_cur > x_max) {
+ x_cur = x_min;
+ y_cur++;
+ if (y_cur > y_max) y_cur = y_min;
+ }
+}
+
+void TFT_LTDC::WriteReg(uint16_t Reg) {
+ reg = Reg;
+}
+
+void TFT_LTDC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
+
+ while (x_cur != x_min && Count) {
+ Transmit(*Data);
+ if (MemoryIncrease == DMA_PINC_ENABLE) Data++;
+ Count--;
+ }
+
+ uint16_t width = x_max - x_min + 1;
+ uint16_t height = Count / width;
+ uint16_t x_end_cnt = Count - (width * height);
+
+ if (height) {
+ if (MemoryIncrease == DMA_PINC_ENABLE) {
+ DrawImage(x_min, y_cur, x_min + width, y_cur + height, Data);
+ Data += width * height;
+ } else {
+ DrawRect(x_min, y_cur, x_min + width, y_cur + height, *Data);
+ }
+ y_cur += height;
+ }
+
+ while (x_end_cnt) {
+ Transmit(*Data);
+ if (MemoryIncrease == DMA_PINC_ENABLE) Data++;
+ x_end_cnt--;
+ }
+}
+
+#endif // HAS_LTDC_TFT
+#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
diff --git a/Marlin/src/HAL/STM32/tft/tft_ltdc.h b/Marlin/src/HAL/STM32/tft/tft_ltdc.h
new file mode 100644
index 0000000000..7b63d6929b
--- /dev/null
+++ b/Marlin/src/HAL/STM32/tft/tft_ltdc.h
@@ -0,0 +1,155 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#include "../../../inc/MarlinConfig.h"
+
+#ifdef STM32H7xx
+ #include "stm32h7xx_hal.h"
+#else
+ #error "LTDC TFT is currently only supported on STM32H7 hardware."
+#endif
+
+#define DATASIZE_8BIT SPI_DATASIZE_8BIT
+#define DATASIZE_16BIT SPI_DATASIZE_16BIT
+#define TFT_IO_DRIVER TFT_LTDC
+
+#define TFT_DATASIZE DATASIZE_16BIT
+typedef uint16_t tft_data_t;
+
+class TFT_LTDC {
+ private:
+ static volatile uint16_t *framebuffer;
+ static uint16_t x_min, x_max, y_min, y_max, x_cur, y_cur;
+ static uint8_t reg;
+
+ static uint32_t ReadID(tft_data_t Reg);
+
+ static uint16_t ReadPoint(uint16_t x, uint16_t y);
+ static void DrawPoint(uint16_t x, uint16_t y, uint16_t color);
+ static void DrawRect(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t color);
+ static void DrawImage(uint16_t sx, uint16_t sy, uint16_t ex, uint16_t ey, uint16_t *colors);
+ static void Transmit(tft_data_t Data);
+ static void TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count);
+
+ public:
+ static void Init();
+ static uint32_t GetID();
+ static bool isBusy();
+ static void Abort() { /*__HAL_DMA_DISABLE(&DMAtx);*/ }
+
+ static void DataTransferBegin(uint16_t DataWidth = TFT_DATASIZE) {}
+ static void DataTransferEnd() {};
+
+ static void WriteData(uint16_t Data);
+ static void WriteReg(uint16_t Reg);
+
+ static void WriteSequence(uint16_t *Data, uint16_t Count) { TransmitDMA(DMA_PINC_ENABLE, Data, Count); }
+ static void WriteMultiple(uint16_t Color, uint16_t Count) { static uint16_t Data; Data = Color; TransmitDMA(DMA_PINC_DISABLE, &Data, Count); }
+ static void WriteMultiple(uint16_t Color, uint32_t Count) {
+ static uint16_t Data; Data = Color;
+ while (Count > 0) {
+ TransmitDMA(DMA_MINC_DISABLE, &Data, Count > 0xFFFF ? 0xFFFF : Count);
+ Count = Count > 0xFFFF ? Count - 0xFFFF : 0;
+ }
+ }
+};
+
+const PinMap PinMap_LTDC[] = {
+ {PF_10, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_DE
+ {PG_7, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_CLK
+ {PI_9, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_VSYNC
+ {PI_10, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_HSYNC
+
+ {PG_6, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_R7
+ {PH_12, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_R6
+ {PH_11, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_R5
+ {PH_10, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_R4
+ {PH_9, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_R3
+
+ {PI_2, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G7
+ {PI_1, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G6
+ {PI_0, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G5
+ {PH_15, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G4
+ {PH_14, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G3
+ {PH_13, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_G2
+
+ {PI_7, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_B7
+ {PI_6, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_B6
+ {PI_5, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_B5
+ {PI_4, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_B4
+ {PG_11, LTDC, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_LTDC)}, // LCD_B3
+ {NC, NP, 0}
+};
+
+const PinMap PinMap_SDRAM[] = {
+ {PC_0, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDNWE
+ {PC_2, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDNE0
+ {PC_3, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDCKE0
+ {PE_0, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_NBL0
+ {PE_1, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_NBL1
+ {PF_11, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDNRAS
+ {PG_8, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDCLK
+ {PG_15, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_SDNCAS
+ {PG_4, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_BA0
+ {PG_5, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_BA1
+ {PD_14, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D0
+ {PD_15, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D1
+ {PD_0, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D2
+ {PD_1, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D3
+ {PE_7, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D4
+ {PE_8, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D5
+ {PE_9, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D6
+ {PE_10, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D7
+ {PE_11, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D8
+ {PE_12, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D9
+ {PE_13, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D10
+ {PE_14, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D11
+ {PE_15, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D12
+ {PD_8, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D13
+ {PD_9, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D14
+ {PD_10, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_D15
+ {PF_0, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A0
+ {PF_1, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A1
+ {PF_2, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A2
+ {PF_3, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A3
+ {PF_4, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A4
+ {PF_5, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A5
+ {PF_12, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A6
+ {PF_13, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A7
+ {PF_14, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A8
+ {PF_15, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A9
+ {PG_0, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A10
+ {PG_1, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A11
+ {PG_2, FMC_Bank1_R, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_FMC)}, // FMC_A12
+ {NC, NP, 0}
+};
+
+const PinMap PinMap_QUADSPI[] = {
+ {PB_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_CLK
+ {PB_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_NCS
+ {PF_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO3
+ {PF_7, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_QUADSPI)}, // QUADSPI_BK1_IO2
+ {PF_8, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO0
+ {PF_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO1
+ {NC, NP, 0}
+};
diff --git a/Marlin/src/HAL/STM32/timers.cpp b/Marlin/src/HAL/STM32/timers.cpp
index e8e18a47d4..03353c2ca3 100644
--- a/Marlin/src/HAL/STM32/timers.cpp
+++ b/Marlin/src/HAL/STM32/timers.cpp
@@ -74,7 +74,7 @@
#elif defined(STM32F401xC) || defined(STM32F401xE)
#define MCU_STEP_TIMER 9
#define MCU_TEMP_TIMER 10
-#elif defined(STM32F4xx) || defined(STM32F7xx)
+#elif defined(STM32F4xx) || defined(STM32F7xx) || defined(STM32H7xx)
#define MCU_STEP_TIMER 6 // STM32F401 has no TIM6, TIM7, or TIM8
#define MCU_TEMP_TIMER 14 // TIM7 is consumed by Software Serial if used.
#endif
diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h
index d2e2236a14..beaea57354 100644
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@@ -390,6 +390,7 @@
#define BOARD_TEENSY41 5001 // Teensy 4.1
#define BOARD_T41U5XBB 5002 // T41U5XBB Teensy 4.1 breakout board
#define BOARD_NUCLEO_F767ZI 5003 // ST NUCLEO-F767ZI Dev Board
+#define BOARD_BTT_SKR_SE_BX 5004 // BigTreeTech SKR SE BX (STM32H743II)
//
// Espressif ESP32 WiFi
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index 88bd382020..7ae1d8dccd 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -1119,6 +1119,10 @@
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY)
#define TFT_RES_480x320
#define TFT_INTERFACE_FSMC
+#elif ENABLED(BIQU_BX_TFT70) // RGB
+ #define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY)
+ #define TFT_RES_1024x600
+ #define TFT_INTERFACE_LTDC
#elif ENABLED(TFT_GENERIC)
#define TFT_DEFAULT_ORIENTATION (TFT_EXCHANGE_XY | TFT_INVERT_X | TFT_INVERT_Y)
#if NONE(TFT_RES_320x240, TFT_RES_480x272, TFT_RES_480x320)
@@ -1141,9 +1145,13 @@
#define TFT_WIDTH 480
#define TFT_HEIGHT 320
#define GRAPHICAL_TFT_UPSCALE 3
+#elif ENABLED(TFT_RES_1024x600)
+ #define TFT_WIDTH 1024
+ #define TFT_HEIGHT 600
+ #define GRAPHICAL_TFT_UPSCALE 4
#endif
-// FSMC/SPI TFT Panels using standard HAL/tft/tft_(fsmc|spi).h
+// FSMC/SPI TFT Panels using standard HAL/tft/tft_(fsmc|spi|ltdc).h
#if ENABLED(TFT_INTERFACE_FSMC)
#define HAS_FSMC_TFT 1
#if TFT_SCALED_DOGLCD
@@ -1158,6 +1166,13 @@
#elif HAS_TFT_LVGL_UI
#define HAS_TFT_LVGL_UI_SPI 1
#endif
+#elif ENABLED(TFT_INTERFACE_LTDC)
+ #define HAS_LTDC_TFT 1
+ #if TFT_SCALED_DOGLCD
+ #define HAS_LTDC_GRAPHICAL_TFT 1
+ #elif HAS_TFT_LVGL_UI
+ #define HAS_TFT_LVGL_UI_LTDC 1
+ #endif
#endif
#if ENABLED(TFT_COLOR_UI)
@@ -1179,6 +1194,10 @@
#elif ENABLED(TFT_INTERFACE_FSMC)
#define TFT_480x272
#endif
+ #elif TFT_HEIGHT == 600
+ #if ENABLED(TFT_INTERFACE_LTDC)
+ #define TFT_1024x600_LTDC
+ #endif
#endif
#endif
@@ -1188,9 +1207,13 @@
#define HAS_UI_480x320 1
#elif EITHER(TFT_480x272, TFT_480x272_SPI)
#define HAS_UI_480x272 1
+#elif defined(TFT_1024x600_LTDC)
+ #define HAS_UI_1024x600 1
#endif
#if ANY(HAS_UI_320x240, HAS_UI_480x320, HAS_UI_480x272)
#define LCD_HEIGHT TERN(TOUCH_SCREEN, 6, 7) // Fewer lines with touch buttons onscreen
+#elif HAS_UI_1024x600
+ #define LCD_HEIGHT TERN(TOUCH_SCREEN, 12, 13) // Fewer lines with touch buttons onscreen
#endif
// This emulated DOGM has 'touch/xpt2046', not 'tft/xpt2046'
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 48a536b531..f6c5cc202a 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -2404,7 +2404,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
#undef IS_EXTUI
#undef IS_LEGACY_TFT
-#if ANY(TFT_GENERIC, MKS_TS35_V2_0, MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32, MKS_ROBIN_TFT35, MKS_ROBIN_TFT43, MKS_ROBIN_TFT_V1_1R, TFT_TRONXY_X5SA, ANYCUBIC_TFT35, ANYCUBIC_TFT35, LONGER_LK_TFT28, ANET_ET4_TFT28, ANET_ET5_TFT35)
+#if ANY(TFT_GENERIC, MKS_TS35_V2_0, MKS_ROBIN_TFT24, MKS_ROBIN_TFT28, MKS_ROBIN_TFT32, MKS_ROBIN_TFT35, MKS_ROBIN_TFT43, MKS_ROBIN_TFT_V1_1R, TFT_TRONXY_X5SA, ANYCUBIC_TFT35, ANYCUBIC_TFT35, LONGER_LK_TFT28, ANET_ET4_TFT28, ANET_ET5_TFT35, BIQU_BX_TFT70)
#if NONE(TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI)
#error "TFT_COLOR_UI, TFT_CLASSIC_UI, TFT_LVGL_UI is required for your TFT. Please enable one."
#elif 1 < ENABLED(TFT_COLOR_UI) + ENABLED(TFT_CLASSIC_UI) + ENABLED(TFT_LVGL_UI)
@@ -2426,16 +2426,16 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
#error "Please enable only one LCD_SCREEN_ROT_* option: 0, 90, 180, or 270."
#endif
-#if MANY(TFT_RES_320x240, TFT_RES_480x272, TFT_RES_480x320)
- #error "Please select only one of TFT_RES_480x320, TFT_RES_480x320, or TFT_RES_480x272."
+#if MANY(TFT_RES_320x240, TFT_RES_480x272, TFT_RES_480x320, TFT_RES_1024x600)
+ #error "Please select only one of TFT_RES_320x240, TFT_RES_480x272, TFT_RES_480x320, or TFT_RES_1024x600."
#endif
#if HAS_TFT_LVGL_UI && DISABLED(TFT_RES_480x320)
#error "(FMSC|SPI)TFT_LVGL_UI requires TFT_RES_480x320."
#endif
-#if defined(GRAPHICAL_TFT_UPSCALE) && !WITHIN(GRAPHICAL_TFT_UPSCALE, 2, 3)
- #error "GRAPHICAL_TFT_UPSCALE must be set to 2 or 3."
+#if defined(GRAPHICAL_TFT_UPSCALE) && !WITHIN(GRAPHICAL_TFT_UPSCALE, 2, 4)
+ #error "GRAPHICAL_TFT_UPSCALE must be 2, 3, or 4."
#endif
/**
diff --git a/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp b/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp
index 3842611fdf..682178efe5 100644
--- a/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp
+++ b/Marlin/src/lcd/dogm/u8g_dev_tft_upscale_from_128x64.cpp
@@ -55,14 +55,14 @@
#include "../../inc/MarlinConfig.h"
-#if HAS_MARLINUI_U8GLIB && (PIN_EXISTS(FSMC_CS) || HAS_SPI_GRAPHICAL_TFT)
+#if HAS_MARLINUI_U8GLIB && (PIN_EXISTS(FSMC_CS) || HAS_SPI_GRAPHICAL_TFT || HAS_LTDC_GRAPHICAL_TFT)
#include "HAL_LCD_com_defines.h"
#include "marlinui_DOGM.h"
#include
-#if EITHER(LCD_USE_DMA_FSMC, LCD_USE_DMA_SPI)
+#if ANY(LCD_USE_DMA_FSMC, LCD_USE_DMA_SPI, HAS_LTDC_GRAPHICAL_TFT)
#define HAS_LCD_IO 1
#endif
diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_view_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_view_screen.cpp
index 8321bd8bb5..dfc51d9505 100644
--- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_view_screen.cpp
+++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/bed_mesh_view_screen.cpp
@@ -55,7 +55,7 @@ constexpr static float gaugeThickness = 0.25;
static float meshGetter(uint8_t x, uint8_t y, void*) {
xy_uint8_t pos;
pos.x = x;
- pos.y = y;
+ pos.y = y;
return ExtUI::getMeshPoint(pos);
}
diff --git a/Marlin/src/lcd/tft/tft.h b/Marlin/src/lcd/tft/tft.h
index 99d335d135..1576518b4b 100644
--- a/Marlin/src/lcd/tft/tft.h
+++ b/Marlin/src/lcd/tft/tft.h
@@ -46,6 +46,9 @@
#elif HAS_UI_480x272
#define TFT_WIDTH 480
#define TFT_HEIGHT 272
+#elif HAS_UI_1024x600
+ #define TFT_WIDTH 1024
+ #define TFT_HEIGHT 600
#else
#error "Unsupported display resolution!"
#endif
diff --git a/Marlin/src/lcd/tft/ui_1024x600.cpp b/Marlin/src/lcd/tft/ui_1024x600.cpp
new file mode 100644
index 0000000000..e04d589858
--- /dev/null
+++ b/Marlin/src/lcd/tft/ui_1024x600.cpp
@@ -0,0 +1,927 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if HAS_UI_1024x600
+
+#include "ui_common.h"
+
+#include "../marlinui.h"
+#include "../menu/menu.h"
+#include "../../libs/numtostr.h"
+
+#include "../../sd/cardreader.h"
+#include "../../module/temperature.h"
+#include "../../module/printcounter.h"
+#include "../../module/planner.h"
+#include "../../module/motion.h"
+
+#if DISABLED(LCD_PROGRESS_BAR) && BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT)
+ #include "../../feature/filwidth.h"
+ #include "../../gcode/parser.h"
+#endif
+
+#if ENABLED(AUTO_BED_LEVELING_UBL)
+ #include "../../feature/bedlevel/bedlevel.h"
+#endif
+
+void MarlinUI::tft_idle() {
+ #if ENABLED(TOUCH_SCREEN)
+ if (draw_menu_navigation) {
+ add_control(104, TFT_HEIGHT - 34, PAGE_UP, imgPageUp, encoderTopLine > 0);
+ add_control(344, TFT_HEIGHT - 34, PAGE_DOWN, imgPageDown, encoderTopLine + LCD_HEIGHT < screen_items);
+ add_control(224, TFT_HEIGHT - 34, BACK, imgBack);
+ draw_menu_navigation = false;
+ }
+ #endif
+
+ tft.queue.async();
+ TERN_(TOUCH_SCREEN, touch.idle());
+}
+
+#if ENABLED(SHOW_BOOTSCREEN)
+ void MarlinUI::show_bootscreen() {
+ tft.queue.reset();
+
+ tft.canvas(0, 0, TFT_WIDTH, TFT_HEIGHT);
+ #if ENABLED(BOOT_MARLIN_LOGO_SMALL)
+ #define BOOT_LOGO_W 195 // MarlinLogo195x59x16
+ #define BOOT_LOGO_H 59
+ #define SITE_URL_Y (TFT_HEIGHT - 70)
+ tft.set_background(COLOR_BACKGROUND);
+ #else
+ #define BOOT_LOGO_W TFT_WIDTH // MarlinLogo480x320x16
+ #define BOOT_LOGO_H TFT_HEIGHT
+ #define SITE_URL_Y (TFT_HEIGHT - 90)
+ #endif
+ tft.add_image((TFT_WIDTH - BOOT_LOGO_W) / 2, (TFT_HEIGHT - BOOT_LOGO_H) / 2, imgBootScreen);
+ #ifdef WEBSITE_URL
+ tft_string.set(WEBSITE_URL);
+ tft.add_text(tft_string.center(TFT_WIDTH), SITE_URL_Y, COLOR_WEBSITE_URL, tft_string);
+ #endif
+
+ tft.queue.sync();
+ safe_delay(BOOTSCREEN_TIMEOUT);
+ clear_lcd();
+ }
+#endif
+
+void MarlinUI::draw_kill_screen() {
+ tft.queue.reset();
+ tft.fill(0, 0, TFT_WIDTH, TFT_HEIGHT, COLOR_KILL_SCREEN_BG);
+
+ uint16_t line = 2;
+
+ menu_line(line++, COLOR_KILL_SCREEN_BG);
+ tft_string.set(status_message);
+ tft_string.trim();
+ tft.add_text(tft_string.center(TFT_WIDTH), 0, COLOR_MENU_TEXT, tft_string);
+
+ line++;
+ menu_line(line++, COLOR_KILL_SCREEN_BG);
+ tft_string.set(GET_TEXT(MSG_HALTED));
+ tft_string.trim();
+ tft.add_text(tft_string.center(TFT_WIDTH), 0, COLOR_MENU_TEXT, tft_string);
+
+ menu_line(line++, COLOR_KILL_SCREEN_BG);
+ tft_string.set(GET_TEXT(MSG_PLEASE_RESET));
+ tft_string.trim();
+ tft.add_text(tft_string.center(TFT_WIDTH), 0, COLOR_MENU_TEXT, tft_string);
+
+ tft.queue.sync();
+}
+
+void draw_heater_status(uint16_t x, uint16_t y, const int8_t Heater) {
+ MarlinImage image = imgHotEnd;
+ uint16_t Color;
+ celsius_t currentTemperature, targetTemperature;
+
+ if (Heater >= 0) { // HotEnd
+ currentTemperature = thermalManager.degHotend(Heater);
+ targetTemperature = thermalManager.degTargetHotend(Heater);
+ }
+ #if HAS_HEATED_BED
+ else if (Heater == H_BED) {
+ currentTemperature = thermalManager.degBed();
+ targetTemperature = thermalManager.degTargetBed();
+ }
+ #endif
+ #if HAS_TEMP_CHAMBER
+ else if (Heater == H_CHAMBER) {
+ currentTemperature = thermalManager.degChamber();
+ #if HAS_HEATED_CHAMBER
+ targetTemperature = thermalManager.degTargetChamber();
+ #else
+ targetTemperature = ABSOLUTE_ZERO;
+ #endif
+ }
+ #endif
+ #if HAS_TEMP_COOLER
+ else if (Heater == H_COOLER) {
+ currentTemperature = thermalManager.degCooler();
+ targetTemperature = TERN(HAS_COOLER, thermalManager.degTargetCooler(), ABSOLUTE_ZERO);
+ }
+ #endif
+ else return;
+
+ TERN_(TOUCH_SCREEN, if (targetTemperature >= 0) touch.add_control(HEATER, x, y, 80, 120, Heater));
+ tft.canvas(x, y, 80, 120);
+ tft.set_background(COLOR_BACKGROUND);
+
+ Color = currentTemperature < 0 ? COLOR_INACTIVE : COLOR_COLD;
+
+ if (Heater >= 0) { // HotEnd
+ if (currentTemperature >= 50) Color = COLOR_HOTEND;
+ }
+ #if HAS_HEATED_BED
+ else if (Heater == H_BED) {
+ if (currentTemperature >= 50) Color = COLOR_HEATED_BED;
+ image = targetTemperature > 0 ? imgBedHeated : imgBed;
+ }
+ #endif
+ #if HAS_TEMP_CHAMBER
+ else if (Heater == H_CHAMBER) {
+ if (currentTemperature >= 50) Color = COLOR_CHAMBER;
+ image = targetTemperature > 0 ? imgChamberHeated : imgChamber;
+ }
+ #endif
+
+ tft.add_image(8, 28, image, Color);
+
+ tft_string.set((uint8_t *)i16tostr3rj(currentTemperature));
+ tft_string.add(LCD_STR_DEGREE);
+ tft_string.trim();
+ tft.add_text(tft_string.center(80) + 2, 82, Color, tft_string);
+
+ if (targetTemperature >= 0) {
+ tft_string.set((uint8_t *)i16tostr3rj(targetTemperature));
+ tft_string.add(LCD_STR_DEGREE);
+ tft_string.trim();
+ tft.add_text(tft_string.center(80) + 2, 8, Color, tft_string);
+ }
+}
+
+void draw_fan_status(uint16_t x, uint16_t y, const bool blink) {
+ TERN_(TOUCH_SCREEN, touch.add_control(FAN, x, y, 80, 120));
+ tft.canvas(x, y, 80, 120);
+ tft.set_background(COLOR_BACKGROUND);
+
+ uint8_t fanSpeed = thermalManager.fan_speed[0];
+ MarlinImage image;
+
+ if (fanSpeed >= 127)
+ image = blink ? imgFanFast1 : imgFanFast0;
+ else if (fanSpeed > 0)
+ image = blink ? imgFanSlow1 : imgFanSlow0;
+ else
+ image = imgFanIdle;
+
+ tft.add_image(8, 20, image, COLOR_FAN);
+
+ tft_string.set((uint8_t *)ui8tostr4pctrj(thermalManager.fan_speed[0]));
+ tft_string.trim();
+ tft.add_text(tft_string.center(80) + 6, 82, COLOR_FAN, tft_string);
+}
+
+void MarlinUI::draw_status_screen() {
+ const bool blink = get_blink();
+
+ TERN_(TOUCH_SCREEN, touch.clear());
+
+ // heaters and fan
+ uint16_t i, x, y = TFT_STATUS_TOP_Y;
+
+ for (i = 0 ; i < ITEMS_COUNT; i++) {
+ x = (TFT_WIDTH / ITEMS_COUNT - 80) / 2 + (TFT_WIDTH * i / ITEMS_COUNT);
+ switch (i) {
+ #ifdef ITEM_E0
+ case ITEM_E0: draw_heater_status(x, y, H_E0); break;
+ #endif
+ #ifdef ITEM_E1
+ case ITEM_E1: draw_heater_status(x, y, H_E1); break;
+ #endif
+ #ifdef ITEM_E2
+ case ITEM_E2: draw_heater_status(x, y, H_E2); break;
+ #endif
+ #ifdef ITEM_BED
+ case ITEM_BED: draw_heater_status(x, y, H_BED); break;
+ #endif
+ #ifdef ITEM_CHAMBER
+ case ITEM_CHAMBER: draw_heater_status(x, y, H_CHAMBER); break;
+ #endif
+ #ifdef ITEM_FAN
+ case ITEM_FAN: draw_fan_status(x, y, blink); break;
+ #endif
+ }
+ }
+
+ y += 200;
+
+ // coordinates
+ tft.canvas(4, y, TFT_WIDTH - 8, FONT_LINE_HEIGHT);
+ tft.set_background(COLOR_BACKGROUND);
+ tft.add_rectangle(0, 0, TFT_WIDTH - 8, FONT_LINE_HEIGHT, COLOR_AXIS_HOMED);
+
+ tft.add_text(200, 3, COLOR_AXIS_HOMED , "X");
+ tft.add_text(500, 3, COLOR_AXIS_HOMED , "Y");
+ tft.add_text(800, 3, COLOR_AXIS_HOMED , "Z");
+
+ bool not_homed = axis_should_home(X_AXIS);
+ tft_string.set(blink && not_homed ? "?" : ftostr4sign(LOGICAL_X_POSITION(current_position.x)));
+ tft.add_text(300 - tft_string.width(), 3, not_homed ? COLOR_AXIS_NOT_HOMED : COLOR_AXIS_HOMED, tft_string);
+
+ not_homed = axis_should_home(Y_AXIS);
+ tft_string.set(blink && not_homed ? "?" : ftostr4sign(LOGICAL_Y_POSITION(current_position.y)));
+ tft.add_text(600 - tft_string.width(), 3, not_homed ? COLOR_AXIS_NOT_HOMED : COLOR_AXIS_HOMED, tft_string);
+
+ uint16_t offset = 32;
+ not_homed = axis_should_home(Z_AXIS);
+ if (blink && not_homed)
+ tft_string.set("?");
+ else {
+ const float z = LOGICAL_Z_POSITION(current_position.z);
+ tft_string.set(ftostr52sp((int16_t)z));
+ tft_string.rtrim();
+ offset += tft_string.width();
+
+ tft_string.set(ftostr52sp(z));
+ offset -= tft_string.width();
+ }
+ tft.add_text(900 - tft_string.width() - offset, 3, not_homed ? COLOR_AXIS_NOT_HOMED : COLOR_AXIS_HOMED, tft_string);
+ TERN_(TOUCH_SCREEN, touch.add_control(MOVE_AXIS, 4, y, TFT_WIDTH - 8, FONT_LINE_HEIGHT));
+
+ y += 100;
+ // feed rate
+ tft.canvas(274, y, 100, 32);
+ tft.set_background(COLOR_BACKGROUND);
+ uint16_t color = feedrate_percentage == 100 ? COLOR_RATE_100 : COLOR_RATE_ALTERED;
+ tft.add_image(0, 0, imgFeedRate, color);
+ tft_string.set(i16tostr3rj(feedrate_percentage));
+ tft_string.add('%');
+ tft.add_text(36, 1, color , tft_string);
+ TERN_(TOUCH_SCREEN, touch.add_control(FEEDRATE, 96, 176, 100, 32));
+
+ // flow rate
+ tft.canvas(650, y, 100, 32);
+ tft.set_background(COLOR_BACKGROUND);
+ color = planner.flow_percentage[0] == 100 ? COLOR_RATE_100 : COLOR_RATE_ALTERED;
+ tft.add_image(0, 0, imgFlowRate, color);
+ tft_string.set(i16tostr3rj(planner.flow_percentage[active_extruder]));
+ tft_string.add('%');
+ tft.add_text(36, 1, color , tft_string);
+ TERN_(TOUCH_SCREEN, touch.add_control(FLOWRATE, 284, 176, 100, 32, active_extruder));
+
+ #if ENABLED(TOUCH_SCREEN)
+ add_control(404, y, menu_main, imgSettings);
+ TERN_(SDSUPPORT, add_control(12, y, menu_media, imgSD, !printingIsActive(), COLOR_CONTROL_ENABLED, card.isMounted() && printingIsActive() ? COLOR_BUSY : COLOR_CONTROL_DISABLED));
+ #endif
+
+ y += 100;
+ // print duration
+ char buffer[14];
+ duration_t elapsed = print_job_timer.duration();
+ elapsed.toDigital(buffer);
+
+ tft.canvas((TFT_WIDTH - 128) / 2, y, 128, 29);
+ tft.set_background(COLOR_BACKGROUND);
+ tft_string.set(buffer);
+ tft.add_text(tft_string.center(128), 0, COLOR_PRINT_TIME, tft_string);
+
+ y += 50;
+ // progress bar
+ const uint8_t progress = ui.get_progress_percent();
+ tft.canvas(4, y, TFT_WIDTH - 8, 9);
+ tft.set_background(COLOR_PROGRESS_BG);
+ tft.add_rectangle(0, 0, TFT_WIDTH - 8, 9, COLOR_PROGRESS_FRAME);
+ if (progress)
+ tft.add_bar(1, 1, ((TFT_WIDTH - 10) * progress) / 100, 7, COLOR_PROGRESS_BAR);
+
+ y += 50;
+ // status message
+ tft.canvas(0, y, TFT_WIDTH, FONT_LINE_HEIGHT - 5);
+ tft.set_background(COLOR_BACKGROUND);
+ tft_string.set(status_message);
+ tft_string.trim();
+ tft.add_text(tft_string.center(TFT_WIDTH), 0, COLOR_STATUS_MESSAGE, tft_string);
+}
+
+// Low-level draw_edit_screen can be used to draw an edit screen from anyplace
+void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char * const value/*=nullptr*/) {
+ ui.encoder_direction_normal();
+ TERN_(TOUCH_SCREEN, touch.clear());
+
+ uint16_t line = 1;
+
+ menu_line(line++);
+ tft_string.set(pstr, itemIndex, itemString);
+ tft_string.trim();
+ tft.add_text(tft_string.center(TFT_WIDTH), MENU_TEXT_Y_OFFSET, COLOR_MENU_TEXT, tft_string);
+
+ TERN_(AUTO_BED_LEVELING_UBL, if (ui.external_control) line++); // ftostr52() will overwrite *value so *value has to be displayed first
+
+ menu_line(line);
+ tft_string.set(value);
+ tft_string.trim();
+ tft.add_text(tft_string.center(TFT_WIDTH), MENU_TEXT_Y_OFFSET, COLOR_MENU_VALUE, tft_string);
+
+ #if ENABLED(AUTO_BED_LEVELING_UBL)
+ if (ui.external_control) {
+ menu_line(line - 1);
+
+ tft_string.set(X_LBL);
+ tft.add_text((TFT_WIDTH / 2 - 120), MENU_TEXT_Y_OFFSET, COLOR_MENU_TEXT, tft_string);
+ tft_string.set(ftostr52(LOGICAL_X_POSITION(current_position.x)));
+ tft_string.trim();
+ tft.add_text((TFT_WIDTH / 2 - 16) - tft_string.width(), MENU_TEXT_Y_OFFSET, COLOR_MENU_VALUE, tft_string);
+
+ tft_string.set(Y_LBL);
+ tft.add_text((TFT_WIDTH / 2 + 16), MENU_TEXT_Y_OFFSET, COLOR_MENU_TEXT, tft_string);
+ tft_string.set(ftostr52(LOGICAL_X_POSITION(current_position.y)));
+ tft_string.trim();
+ tft.add_text((TFT_WIDTH / 2 + 120) - tft_string.width(), MENU_TEXT_Y_OFFSET, COLOR_MENU_VALUE, tft_string);
+ }
+ #endif
+
+ extern screenFunc_t _manual_move_func_ptr;
+ if (ui.currentScreen != _manual_move_func_ptr && !ui.external_control) {
+
+ #define SLIDER_LENGTH 336
+ #define SLIDER_Y_POSITION 186
+
+ tft.canvas((TFT_WIDTH - SLIDER_LENGTH) / 2, SLIDER_Y_POSITION, SLIDER_LENGTH, 16);
+ tft.set_background(COLOR_BACKGROUND);
+
+ int16_t position = (SLIDER_LENGTH - 2) * ui.encoderPosition / maxEditValue;
+ tft.add_bar(0, 7, 1, 2, ui.encoderPosition == 0 ? COLOR_SLIDER_INACTIVE : COLOR_SLIDER);
+ tft.add_bar(1, 6, position, 4, COLOR_SLIDER);
+ tft.add_bar(position + 1, 6, SLIDER_LENGTH - 2 - position, 4, COLOR_SLIDER_INACTIVE);
+ tft.add_bar(SLIDER_LENGTH - 1, 7, 1, 2, int32_t(ui.encoderPosition) == maxEditValue ? COLOR_SLIDER : COLOR_SLIDER_INACTIVE);
+
+ #if ENABLED(TOUCH_SCREEN)
+ tft.add_image((SLIDER_LENGTH - 8) * ui.encoderPosition / maxEditValue, 0, imgSlider, COLOR_SLIDER);
+ touch.add_control(SLIDER, (TFT_WIDTH - SLIDER_LENGTH) / 2, SLIDER_Y_POSITION - 8, SLIDER_LENGTH, 32, maxEditValue);
+ #endif
+ }
+
+ tft.draw_edit_screen_buttons();
+}
+
+void TFT::draw_edit_screen_buttons() {
+ #if ENABLED(TOUCH_SCREEN)
+ add_control(64, TFT_HEIGHT - 64, DECREASE, imgDecrease);
+ add_control(352, TFT_HEIGHT - 64, INCREASE, imgIncrease);
+ add_control(208, TFT_HEIGHT - 64, CLICK, imgConfirm);
+ #endif
+}
+
+// The Select Screen presents a prompt and two "buttons"
+void MenuItem_confirm::draw_select_screen(PGM_P const yes, PGM_P const no, const bool yesno, PGM_P const pref, const char * const string/*=nullptr*/, PGM_P const suff/*=nullptr*/) {
+ uint16_t line = 1;
+
+ if (!string) line++;
+
+ menu_line(line++);
+ tft_string.set(pref);
+ tft_string.trim();
+ tft.add_text(tft_string.center(TFT_WIDTH), 0, COLOR_MENU_TEXT, tft_string);
+
+ if (string) {
+ menu_line(line++);
+ tft_string.set(string);
+ tft_string.trim();
+ tft.add_text(tft_string.center(TFT_WIDTH), 0, COLOR_MENU_TEXT, tft_string);
+ }
+
+ if (suff) {
+ menu_line(line);
+ tft_string.set(suff);
+ tft_string.trim();
+ tft.add_text(tft_string.center(TFT_WIDTH), 0, COLOR_MENU_TEXT, tft_string);
+ }
+ #if ENABLED(TOUCH_SCREEN)
+ add_control(88, TFT_HEIGHT - 64, CANCEL, imgCancel, true, yesno ? HALF(COLOR_CONTROL_CANCEL) : COLOR_CONTROL_CANCEL);
+ add_control(328, TFT_HEIGHT - 64, CONFIRM, imgConfirm, true, yesno ? COLOR_CONTROL_CONFIRM : HALF(COLOR_CONTROL_CONFIRM));
+ #else
+ menu_line(++line);
+ if (no) {
+ tft_string.set(no);
+ tft_string.trim();
+ tft.add_text(tft_string.center(TFT_WIDTH / 2), 0, !yesno ? COLOR_RED : COLOR_MENU_TEXT, tft_string);
+ }
+
+ if (yes) {
+ tft_string.set(yes);
+ tft_string.trim();
+ tft.add_text(TFT_WIDTH / 2 + tft_string.center(TFT_WIDTH / 2), 0, yesno ? COLOR_RED : COLOR_MENU_TEXT, tft_string);
+ }
+ #endif
+}
+
+#if ENABLED(ADVANCED_PAUSE_FEATURE)
+
+ void MarlinUI::draw_hotend_status(const uint8_t row, const uint8_t extruder) {
+ #if ENABLED(TOUCH_SCREEN)
+ touch.clear();
+ draw_menu_navigation = false;
+ touch.add_control(RESUME_CONTINUE , 0, 0, TFT_WIDTH, TFT_HEIGHT);
+ #endif
+
+ menu_line(row);
+ tft_string.set(GET_TEXT(MSG_FILAMENT_CHANGE_NOZZLE));
+ tft_string.add('E');
+ tft_string.add((char)('1' + extruder));
+ tft_string.add(' ');
+ tft_string.add(i16tostr3rj(thermalManager.degHotend(extruder)));
+ tft_string.add(LCD_STR_DEGREE);
+ tft_string.add(" / ");
+ tft_string.add(i16tostr3rj(thermalManager.degTargetHotend(extruder)));
+ tft_string.add(LCD_STR_DEGREE);
+ tft_string.trim();
+ tft.add_text(tft_string.center(TFT_WIDTH), 0, COLOR_MENU_TEXT, tft_string);
+ }
+
+#endif // ADVANCED_PAUSE_FEATURE
+
+#if ENABLED(AUTO_BED_LEVELING_UBL)
+ #define GRID_OFFSET_X 8
+ #define GRID_OFFSET_Y 8
+ #define GRID_WIDTH 192
+ #define GRID_HEIGHT 192
+ #define CONTROL_OFFSET 16
+
+ void MarlinUI::ubl_plot(const uint8_t x_plot, const uint8_t y_plot) {
+
+ tft.canvas(GRID_OFFSET_X, GRID_OFFSET_Y, GRID_WIDTH, GRID_HEIGHT);
+ tft.set_background(COLOR_BACKGROUND);
+ tft.add_rectangle(0, 0, GRID_WIDTH, GRID_HEIGHT, COLOR_WHITE);
+
+ for (uint16_t x = 0; x < GRID_MAX_POINTS_X ; x++)
+ for (uint16_t y = 0; y < GRID_MAX_POINTS_Y ; y++)
+ if (position_is_reachable({ ubl.mesh_index_to_xpos(x), ubl.mesh_index_to_ypos(y) }))
+ tft.add_bar(1 + (x * 2 + 1) * (GRID_WIDTH - 4) / GRID_MAX_POINTS_X / 2, GRID_HEIGHT - 3 - ((y * 2 + 1) * (GRID_HEIGHT - 4) / GRID_MAX_POINTS_Y / 2), 2, 2, COLOR_UBL);
+
+ tft.add_rectangle((x_plot * 2 + 1) * (GRID_WIDTH - 4) / GRID_MAX_POINTS_X / 2 - 1, GRID_HEIGHT - 5 - ((y_plot * 2 + 1) * (GRID_HEIGHT - 4) / GRID_MAX_POINTS_Y / 2), 6, 6, COLOR_UBL);
+
+ const xy_pos_t pos = { ubl.mesh_index_to_xpos(x_plot), ubl.mesh_index_to_ypos(y_plot) },
+ lpos = pos.asLogical();
+
+ tft.canvas(320, GRID_OFFSET_Y + (GRID_HEIGHT - MENU_ITEM_HEIGHT) / 2 - MENU_ITEM_HEIGHT, 120, MENU_ITEM_HEIGHT);
+ tft.set_background(COLOR_BACKGROUND);
+ tft_string.set(X_LBL);
+ tft.add_text(0, MENU_TEXT_Y_OFFSET, COLOR_MENU_TEXT, tft_string);
+ tft_string.set(ftostr52(lpos.x));
+ tft_string.trim();
+ tft.add_text(120 - tft_string.width(), MENU_TEXT_Y_OFFSET, COLOR_MENU_VALUE, tft_string);
+
+ tft.canvas(320, GRID_OFFSET_Y + (GRID_HEIGHT - MENU_ITEM_HEIGHT) / 2, 120, MENU_ITEM_HEIGHT);
+ tft.set_background(COLOR_BACKGROUND);
+ tft_string.set(Y_LBL);
+ tft.add_text(0, MENU_TEXT_Y_OFFSET, COLOR_MENU_TEXT, tft_string);
+ tft_string.set(ftostr52(lpos.y));
+ tft_string.trim();
+ tft.add_text(120 - tft_string.width(), MENU_TEXT_Y_OFFSET, COLOR_MENU_VALUE, tft_string);
+
+ tft.canvas(320, GRID_OFFSET_Y + (GRID_HEIGHT - MENU_ITEM_HEIGHT) / 2 + MENU_ITEM_HEIGHT, 120, MENU_ITEM_HEIGHT);
+ tft.set_background(COLOR_BACKGROUND);
+ tft_string.set(Z_LBL);
+ tft.add_text(0, MENU_TEXT_Y_OFFSET, COLOR_MENU_TEXT, tft_string);
+ tft_string.set(isnan(ubl.z_values[x_plot][y_plot]) ? "-----" : ftostr43sign(ubl.z_values[x_plot][y_plot]));
+ tft_string.trim();
+ tft.add_text(120 - tft_string.width(), MENU_TEXT_Y_OFFSET, COLOR_MENU_VALUE, tft_string);
+
+ constexpr uint8_t w = (TFT_WIDTH) / 10;
+ tft.canvas(GRID_OFFSET_X + (GRID_WIDTH - w) / 2, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET - 5, w, MENU_ITEM_HEIGHT);
+ tft.set_background(COLOR_BACKGROUND);
+ tft_string.set(ui8tostr3rj(x_plot));
+ tft_string.trim();
+ tft.add_text(tft_string.center(w), MENU_TEXT_Y_OFFSET, COLOR_MENU_VALUE, tft_string);
+
+ tft.canvas(GRID_OFFSET_X + GRID_WIDTH + CONTROL_OFFSET + 16 - 24, GRID_OFFSET_Y + (GRID_HEIGHT - MENU_ITEM_HEIGHT) / 2, w, MENU_ITEM_HEIGHT);
+ tft.set_background(COLOR_BACKGROUND);
+ tft_string.set(ui8tostr3rj(y_plot));
+ tft_string.trim();
+ tft.add_text(tft_string.center(w), MENU_TEXT_Y_OFFSET, COLOR_MENU_VALUE, tft_string);
+
+ #if ENABLED(TOUCH_SCREEN)
+ touch.clear();
+ draw_menu_navigation = false;
+ add_control(GRID_OFFSET_X + GRID_WIDTH + CONTROL_OFFSET, GRID_OFFSET_Y + CONTROL_OFFSET, UBL, ENCODER_STEPS_PER_MENU_ITEM * GRID_MAX_POINTS_X, imgUp);
+ add_control(GRID_OFFSET_X + GRID_WIDTH + CONTROL_OFFSET, GRID_OFFSET_Y + GRID_HEIGHT - CONTROL_OFFSET - 32, UBL, - ENCODER_STEPS_PER_MENU_ITEM * GRID_MAX_POINTS_X, imgDown);
+ add_control(GRID_OFFSET_X + CONTROL_OFFSET, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET, UBL, - ENCODER_STEPS_PER_MENU_ITEM, imgLeft);
+ add_control(GRID_OFFSET_X + GRID_WIDTH - CONTROL_OFFSET - 32, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET, UBL, ENCODER_STEPS_PER_MENU_ITEM, imgRight);
+ add_control(320, GRID_OFFSET_Y + GRID_HEIGHT + CONTROL_OFFSET, CLICK, imgLeveling);
+ add_control(224, TFT_HEIGHT - 34, BACK, imgBack);
+ #endif
+ }
+#endif // AUTO_BED_LEVELING_UBL
+
+#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
+ #include "../../feature/babystep.h"
+#endif
+
+#if HAS_BED_PROBE
+ #include "../../module/probe.h"
+#endif
+
+#define Z_SELECTION_Z 1
+#define Z_SELECTION_Z_PROBE -1
+
+struct MotionAxisState {
+ xy_int_t xValuePos, yValuePos, zValuePos, eValuePos, stepValuePos, zTypePos, eNamePos;
+ float currentStepSize = 10.0;
+ int z_selection = Z_SELECTION_Z;
+ uint8_t e_selection = 0;
+ bool homming = false;
+ bool blocked = false;
+ char message[32];
+};
+
+MotionAxisState motionAxisState;
+
+#define E_BTN_COLOR COLOR_YELLOW
+#define X_BTN_COLOR COLOR_CORAL_RED
+#define Y_BTN_COLOR COLOR_VIVID_GREEN
+#define Z_BTN_COLOR COLOR_LIGHT_BLUE
+
+#define BTN_WIDTH 64
+#define BTN_HEIGHT 52
+#define X_MARGIN 20
+#define Y_MARGIN 15
+
+static void quick_feedback() {
+ #if HAS_CHIRP
+ ui.chirp(); // Buzz and wait. Is the delay needed for buttons to settle?
+ #if BOTH(HAS_LCD_MENU, USE_BEEPER)
+ for (int8_t i = 5; i--;) { buzzer.tick(); delay(2); }
+ #elif HAS_LCD_MENU
+ delay(10);
+ #endif
+ #endif
+}
+
+#define CUR_STEP_VALUE_WIDTH 104
+static void drawCurStepValue() {
+ tft_string.set((uint8_t *)ftostr52sp(motionAxisState.currentStepSize));
+ tft_string.add("mm");
+ tft.canvas(motionAxisState.stepValuePos.x, motionAxisState.stepValuePos.y, CUR_STEP_VALUE_WIDTH, BTN_HEIGHT);
+ tft.set_background(COLOR_BACKGROUND);
+ tft.add_text(tft_string.center(CUR_STEP_VALUE_WIDTH), 0, COLOR_AXIS_HOMED, tft_string);
+}
+
+static void drawCurZSelection() {
+ tft_string.set("Z");
+ tft.canvas(motionAxisState.zTypePos.x, motionAxisState.zTypePos.y, tft_string.width(), 34);
+ tft.set_background(COLOR_BACKGROUND);
+ tft.add_text(0, 0, Z_BTN_COLOR, tft_string);
+ tft.queue.sync();
+ tft_string.set("Offset");
+ tft.canvas(motionAxisState.zTypePos.x, motionAxisState.zTypePos.y + 34, tft_string.width(), 34);
+ tft.set_background(COLOR_BACKGROUND);
+ if (motionAxisState.z_selection == Z_SELECTION_Z_PROBE) {
+ tft.add_text(0, 0, Z_BTN_COLOR, tft_string);
+ }
+}
+
+static void drawCurESelection() {
+ tft.canvas(motionAxisState.eNamePos.x, motionAxisState.eNamePos.y, BTN_WIDTH, BTN_HEIGHT);
+ tft.set_background(COLOR_BACKGROUND);
+ tft_string.set("E");
+ tft.add_text(0, 0, E_BTN_COLOR , tft_string);
+ tft.add_text(tft_string.width(), 0, E_BTN_COLOR, ui8tostr3rj(motionAxisState.e_selection));
+}
+
+static void drawMessage(const char *msg) {
+ tft.canvas(X_MARGIN, TFT_HEIGHT - Y_MARGIN - 34, TFT_HEIGHT / 2, 34);
+ tft.set_background(COLOR_BACKGROUND);
+ tft.add_text(0, 0, COLOR_YELLOW, msg);
+}
+
+static void drawAxisValue(AxisEnum axis) {
+ const float value =
+ #if HAS_BED_PROBE
+ axis == Z_AXIS && motionAxisState.z_selection == Z_SELECTION_Z_PROBE ?
+ probe.offset.z :
+ #endif
+ NATIVE_TO_LOGICAL(
+ ui.manual_move.processing ? destination[axis] : current_position[axis] + TERN0(IS_KINEMATIC, ui.manual_move.offset),
+ axis
+ );
+ xy_int_t pos;
+ uint16_t color;
+ switch (axis) {
+ case X_AXIS: pos = motionAxisState.xValuePos; color = X_BTN_COLOR; break;
+ case Y_AXIS: pos = motionAxisState.yValuePos; color = Y_BTN_COLOR; break;
+ case Z_AXIS: pos = motionAxisState.zValuePos; color = Z_BTN_COLOR; break;
+ case E_AXIS: pos = motionAxisState.eValuePos; color = E_BTN_COLOR; break;
+ default: return;
+ }
+ tft.canvas(pos.x, pos.y, BTN_WIDTH + X_MARGIN, BTN_HEIGHT);
+ tft.set_background(COLOR_BACKGROUND);
+ tft_string.set(ftostr52sp(value));
+ tft.add_text(0, 0, color, tft_string);
+}
+
+static void moveAxis(AxisEnum axis, const int8_t direction) {
+ quick_feedback();
+
+ if (axis == E_AXIS && thermalManager.temp_hotend[motionAxisState.e_selection].celsius < EXTRUDE_MINTEMP) {
+ drawMessage("Too cold");
+ return;
+ }
+
+ const float diff = motionAxisState.currentStepSize * direction;
+
+ if (axis == Z_AXIS && motionAxisState.z_selection == Z_SELECTION_Z_PROBE) {
+ #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
+ const int16_t babystep_increment = direction * BABYSTEP_SIZE_Z;
+ const bool do_probe = DISABLED(BABYSTEP_HOTEND_Z_OFFSET) || active_extruder == 0;
+ const float bsDiff = planner.steps_to_mm[Z_AXIS] * babystep_increment,
+ new_probe_offset = probe.offset.z + bsDiff,
+ new_offs = TERN(BABYSTEP_HOTEND_Z_OFFSET
+ , do_probe ? new_probe_offset : hotend_offset[active_extruder].z - bsDiff
+ , new_probe_offset
+ );
+ if (WITHIN(new_offs, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX)) {
+ babystep.add_steps(Z_AXIS, babystep_increment);
+ if (do_probe)
+ probe.offset.z = new_offs;
+ else
+ TERN(BABYSTEP_HOTEND_Z_OFFSET, hotend_offset[active_extruder].z = new_offs, NOOP);
+ drawMessage(""); // clear the error
+ drawAxisValue(axis);
+ }
+ else {
+ drawMessage(GET_TEXT(MSG_LCD_SOFT_ENDSTOPS));
+ }
+ #elif HAS_BED_PROBE
+ // only change probe.offset.z
+ probe.offset.z += diff;
+ if (direction < 0 && current_position[axis] < Z_PROBE_OFFSET_RANGE_MIN) {
+ current_position[axis] = Z_PROBE_OFFSET_RANGE_MIN;
+ drawMessage(GET_TEXT(MSG_LCD_SOFT_ENDSTOPS));
+ }
+ else if (direction > 0 && current_position[axis] > Z_PROBE_OFFSET_RANGE_MAX) {
+ current_position[axis] = Z_PROBE_OFFSET_RANGE_MAX;
+ drawMessage(GET_TEXT(MSG_LCD_SOFT_ENDSTOPS));
+ }
+ else {
+ drawMessage(""); // clear the error
+ }
+ drawAxisValue(axis);
+ #endif
+ return;
+ }
+
+ if (!ui.manual_move.processing) {
+ // Get motion limit from software endstops, if any
+ float min, max;
+ soft_endstop.get_manual_axis_limits(axis, min, max);
+
+ // Delta limits XY based on the current offset from center
+ // This assumes the center is 0,0
+ #if ENABLED(DELTA)
+ if (axis != Z_AXIS && axis != E_AXIS) {
+ max = SQRT(sq((float)(DELTA_PRINTABLE_RADIUS)) - sq(current_position[Y_AXIS - axis])); // (Y_AXIS - axis) == the other axis
+ min = -max;
+ }
+ #endif
+
+ // Get the new position
+ #if IS_KINEMATIC
+ ui.manual_move.offset += diff;
+ if (direction < 0)
+ NOLESS(ui.manual_move.offset, min - current_position[axis]);
+ else
+ NOMORE(ui.manual_move.offset, max - current_position[axis]);
+ #else
+ current_position[axis] += diff;
+ const char *msg = NUL_STR; // clear the error
+ if (direction < 0 && current_position[axis] < min) {
+ current_position[axis] = min;
+ msg = GET_TEXT(MSG_LCD_SOFT_ENDSTOPS);
+ }
+ else if (direction > 0 && current_position[axis] > max) {
+ current_position[axis] = max;
+ msg = GET_TEXT(MSG_LCD_SOFT_ENDSTOPS);
+ }
+ drawMessage(msg);
+ #endif
+
+ ui.manual_move.soon(axis
+ #if MULTI_MANUAL
+ , motionAxisState.e_selection
+ #endif
+ );
+ }
+
+ drawAxisValue(axis);
+}
+
+static void e_plus() { moveAxis(E_AXIS, 1); }
+static void e_minus() { moveAxis(E_AXIS, -1); }
+static void x_minus() { moveAxis(X_AXIS, -1); }
+static void x_plus() { moveAxis(X_AXIS, 1); }
+static void y_plus() { moveAxis(Y_AXIS, 1); }
+static void y_minus() { moveAxis(Y_AXIS, -1); }
+static void z_plus() { moveAxis(Z_AXIS, 1); }
+static void z_minus() { moveAxis(Z_AXIS, -1); }
+
+#if ENABLED(TOUCH_SCREEN)
+ static void e_select() {
+ motionAxisState.e_selection++;
+ if (motionAxisState.e_selection >= EXTRUDERS) {
+ motionAxisState.e_selection = 0;
+ }
+
+ quick_feedback();
+ drawCurESelection();
+ drawAxisValue(E_AXIS);
+ }
+
+ static void do_home() {
+ quick_feedback();
+ drawMessage(GET_TEXT(MSG_LEVEL_BED_HOMING));
+ queue.inject_P(G28_STR);
+ // Disable touch until home is done
+ TERN_(HAS_TFT_XPT2046, touch.disable());
+ drawAxisValue(E_AXIS);
+ drawAxisValue(X_AXIS);
+ drawAxisValue(Y_AXIS);
+ drawAxisValue(Z_AXIS);
+ }
+
+ static void step_size() {
+ motionAxisState.currentStepSize = motionAxisState.currentStepSize / 10.0;
+ if (motionAxisState.currentStepSize < 0.0015) motionAxisState.currentStepSize = 10.0;
+ quick_feedback();
+ drawCurStepValue();
+ }
+#endif
+
+#if HAS_BED_PROBE
+ static void z_select() {
+ motionAxisState.z_selection *= -1;
+ quick_feedback();
+ drawCurZSelection();
+ drawAxisValue(Z_AXIS);
+ }
+#endif
+
+static void disable_steppers() {
+ quick_feedback();
+ queue.inject_P(PSTR("M84"));
+}
+
+static void drawBtn(int x, int y, const char *label, intptr_t data, MarlinImage img, uint16_t bgColor, bool enabled = true) {
+ uint16_t width = Images[imgBtn52Rounded].width;
+ uint16_t height = Images[imgBtn52Rounded].height;
+
+ if (!enabled) bgColor = COLOR_CONTROL_DISABLED;
+
+ tft.canvas(x, y, width, height);
+ tft.set_background(COLOR_BACKGROUND);
+ tft.add_image(0, 0, imgBtn52Rounded, bgColor, COLOR_BACKGROUND, COLOR_DARKGREY);
+
+ // TODO: Make an add_text() taking a font arg
+ if (label) {
+ tft_string.set(label);
+ tft_string.trim();
+ tft.add_text(tft_string.center(width), height / 2 - tft_string.font_height() / 2, bgColor, tft_string);
+ }
+ else {
+ tft.add_image(0, 0, img, bgColor, COLOR_BACKGROUND, COLOR_DARKGREY);
+ }
+
+ TERN_(HAS_TFT_XPT2046, if (enabled) touch.add_control(BUTTON, x, y, width, height, data));
+}
+
+void MarlinUI::move_axis_screen() {
+ // Reset
+ defer_status_screen(true);
+ motionAxisState.blocked = false;
+ TERN_(HAS_TFT_XPT2046, touch.enable());
+
+ ui.clear_lcd();
+
+ TERN_(TOUCH_SCREEN, touch.clear());
+
+ const bool busy = printingIsActive();
+
+ // Babysteps during printing? Select babystep for Z probe offset
+ if (busy && ENABLED(BABYSTEP_ZPROBE_OFFSET))
+ motionAxisState.z_selection = Z_SELECTION_Z_PROBE;
+
+ // ROW 1 -> E- Y- CurY Z+
+ int x = X_MARGIN, y = Y_MARGIN, spacing = 0;
+
+ drawBtn(x, y, "E+", (intptr_t)e_plus, imgUp, E_BTN_COLOR, !busy);
+
+ spacing = (TFT_WIDTH - X_MARGIN * 2 - 3 * BTN_WIDTH) / 2;
+ x += BTN_WIDTH + spacing;
+ drawBtn(x, y, "Y+", (intptr_t)y_plus, imgUp, Y_BTN_COLOR, !busy);
+
+ // Cur Y
+ x += BTN_WIDTH;
+ motionAxisState.yValuePos.x = x + 2;
+ motionAxisState.yValuePos.y = y;
+ drawAxisValue(Y_AXIS);
+
+ x += spacing;
+ drawBtn(x, y, "Z+", (intptr_t)z_plus, imgUp, Z_BTN_COLOR, !busy || ENABLED(BABYSTEP_ZPROBE_OFFSET)); //only enabled when not busy or have baby step
+
+ // ROW 2 -> "Ex" X- HOME X+ "Z"
+ y += BTN_HEIGHT + (TFT_HEIGHT - Y_MARGIN * 2 - 4 * BTN_HEIGHT) / 3;
+ x = X_MARGIN;
+ spacing = (TFT_WIDTH - X_MARGIN * 2 - 5 * BTN_WIDTH) / 4;
+
+ motionAxisState.eNamePos.x = x;
+ motionAxisState.eNamePos.y = y;
+ drawCurESelection();
+ TERN_(HAS_TFT_XPT2046, if (!busy) touch.add_control(BUTTON, x, y, BTN_WIDTH, BTN_HEIGHT, (intptr_t)e_select));
+
+ x += BTN_WIDTH + spacing;
+ drawBtn(x, y, "X-", (intptr_t)x_minus, imgLeft, X_BTN_COLOR, !busy);
+
+ x += BTN_WIDTH + spacing; //imgHome is 64x64
+ TERN_(HAS_TFT_XPT2046, add_control(TFT_WIDTH / 2 - Images[imgHome].width / 2, y - (Images[imgHome].width - BTN_HEIGHT) / 2, BUTTON, (intptr_t)do_home, imgHome, !busy));
+
+ x += BTN_WIDTH + spacing;
+ uint16_t xplus_x = x;
+ drawBtn(x, y, "X+", (intptr_t)x_plus, imgRight, X_BTN_COLOR, !busy);
+
+ x += BTN_WIDTH + spacing;
+ motionAxisState.zTypePos.x = x;
+ motionAxisState.zTypePos.y = y;
+ drawCurZSelection();
+ #if BOTH(HAS_BED_PROBE, TOUCH_SCREEN)
+ if (!busy) touch.add_control(BUTTON, x, y, BTN_WIDTH, 34 * 2, (intptr_t)z_select);
+ #endif
+
+ // ROW 3 -> E- CurX Y- Z-
+ y += BTN_HEIGHT + (TFT_HEIGHT - Y_MARGIN * 2 - 4 * BTN_HEIGHT) / 3;
+ x = X_MARGIN;
+ spacing = (TFT_WIDTH - X_MARGIN * 2 - 3 * BTN_WIDTH) / 2;
+
+ drawBtn(x, y, "E-", (intptr_t)e_minus, imgDown, E_BTN_COLOR, !busy);
+
+ // Cur E
+ motionAxisState.eValuePos.x = x;
+ motionAxisState.eValuePos.y = y + BTN_HEIGHT + 2;
+ drawAxisValue(E_AXIS);
+
+ // Cur X
+ motionAxisState.xValuePos.x = BTN_WIDTH + (TFT_WIDTH - X_MARGIN * 2 - 5 * BTN_WIDTH) / 4; //X- pos
+ motionAxisState.xValuePos.y = y - 10;
+ drawAxisValue(X_AXIS);
+
+ x += BTN_WIDTH + spacing;
+ drawBtn(x, y, "Y-", (intptr_t)y_minus, imgDown, Y_BTN_COLOR, !busy);
+
+ x += BTN_WIDTH + spacing;
+ drawBtn(x, y, "Z-", (intptr_t)z_minus, imgDown, Z_BTN_COLOR, !busy || ENABLED(BABYSTEP_ZPROBE_OFFSET)); //only enabled when not busy or have baby step
+
+ // Cur Z
+ motionAxisState.zValuePos.x = x;
+ motionAxisState.zValuePos.y = y + BTN_HEIGHT + 2;
+ drawAxisValue(Z_AXIS);
+
+ // ROW 4 -> step_size disable steppers back
+ y = TFT_HEIGHT - Y_MARGIN - 32; //
+ x = TFT_WIDTH / 2 - CUR_STEP_VALUE_WIDTH / 2;
+ motionAxisState.stepValuePos.x = x;
+ motionAxisState.stepValuePos.y = y;
+ if (!busy) {
+ drawCurStepValue();
+ TERN_(HAS_TFT_XPT2046, touch.add_control(BUTTON, motionAxisState.stepValuePos.x, motionAxisState.stepValuePos.y, CUR_STEP_VALUE_WIDTH, BTN_HEIGHT, (intptr_t)step_size));
+ }
+
+ // aligned with x+
+ drawBtn(xplus_x, TFT_HEIGHT - Y_MARGIN - BTN_HEIGHT, "off", (intptr_t)disable_steppers, imgCancel, COLOR_WHITE, !busy);
+
+ TERN_(HAS_TFT_XPT2046, add_control(TFT_WIDTH - X_MARGIN - BTN_WIDTH, y, BACK, imgBack));
+}
+
+#undef BTN_WIDTH
+#undef BTN_HEIGHT
+
+#endif // HAS_UI_480x320
diff --git a/Marlin/src/lcd/tft/ui_1024x600.h b/Marlin/src/lcd/tft/ui_1024x600.h
new file mode 100644
index 0000000000..dd8c1cc6ec
--- /dev/null
+++ b/Marlin/src/lcd/tft/ui_1024x600.h
@@ -0,0 +1,43 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#define MARLIN_LOGO_FULL_SIZE MarlinLogo480x320x16
+
+#include "ui_common.h"
+
+#define TFT_STATUS_TOP_Y 4
+#define TFT_TOP_LINE_Y 4
+
+#define MENU_TEXT_X_OFFSET 16
+#define MENU_TEXT_Y_OFFSET 7
+
+#define MENU_ITEM_ICON_X 5
+#define MENU_ITEM_ICON_Y 5
+#define MENU_ITEM_ICON_SPACE 42
+
+#define MENU_FONT_NAME Helvetica18
+#define SYMBOLS_FONT_NAME Helvetica18_symbols
+#define MENU_ITEM_HEIGHT 43
+#define FONT_LINE_HEIGHT 34
+
+#define MENU_LINE_HEIGHT (MENU_ITEM_HEIGHT + 2)
diff --git a/Marlin/src/lcd/tft/ui_common.h b/Marlin/src/lcd/tft/ui_common.h
index d43de1d43b..617447a181 100644
--- a/Marlin/src/lcd/tft/ui_common.h
+++ b/Marlin/src/lcd/tft/ui_common.h
@@ -39,6 +39,10 @@
#include "ui_320x240.h"
#elif HAS_UI_480x320 || HAS_UI_480x272
#include "ui_480x320.h"
+#elif HAS_UI_1024x600
+ #include "ui_1024x600.h"
+#else
+ #error "Unsupported display resolution!"
#endif
void draw_heater_status(uint16_t x, uint16_t y, const int8_t Heater);
diff --git a/Marlin/src/lcd/tft_io/tft_io.cpp b/Marlin/src/lcd/tft_io/tft_io.cpp
index cd535458a1..fa81d95a4d 100644
--- a/Marlin/src/lcd/tft_io/tft_io.cpp
+++ b/Marlin/src/lcd/tft_io/tft_io.cpp
@@ -22,7 +22,7 @@
#include "tft_io.h"
-#if HAS_SPI_TFT || HAS_FSMC_TFT
+#if HAS_SPI_TFT || HAS_FSMC_TFT || HAS_LTDC_TFT
#include "st7735.h"
#include "st7789v.h"
@@ -90,6 +90,8 @@ if (lcd_id != 0xFFFFFFFF) return;
lcd_id = io.GetID() & 0xFFFF;
switch (lcd_id) {
+ case LTDC_RGB:
+ break;
case ST7796: // ST7796S 480x320
DEBUG_ECHO_MSG(" ST7796S");
write_esc_sequence(st7796s_init);
@@ -144,6 +146,17 @@ void TFT_IO::set_window(uint16_t Xmin, uint16_t Ymin, uint16_t Xmax, uint16_t Ym
#endif
switch (lcd_id) {
+ case LTDC_RGB:
+ io.WriteReg(0x01);
+ io.WriteData(Xmin);
+ io.WriteReg(0x02);
+ io.WriteData(Xmax);
+ io.WriteReg(0x03);
+ io.WriteData(Ymin);
+ io.WriteReg(0x04);
+ io.WriteData(Ymax);
+ io.WriteReg(0x00);
+ break;
case ST7735: // ST7735 160x128
case ST7789: // ST7789V 320x240
case ST7796: // ST7796 480x320
diff --git a/Marlin/src/lcd/tft_io/tft_io.h b/Marlin/src/lcd/tft_io/tft_io.h
index 2456358571..846b45e8e0 100644
--- a/Marlin/src/lcd/tft_io/tft_io.h
+++ b/Marlin/src/lcd/tft_io/tft_io.h
@@ -23,14 +23,16 @@
#include "../../inc/MarlinConfig.h"
-#if HAS_SPI_TFT || HAS_FSMC_TFT
+#if HAS_SPI_TFT || HAS_FSMC_TFT || HAS_LTDC_TFT
#if HAS_SPI_TFT
#include HAL_PATH(../../HAL, tft/tft_spi.h)
#elif HAS_FSMC_TFT
#include HAL_PATH(../../HAL, tft/tft_fsmc.h)
+#elif HAS_LTDC_TFT
+ #include HAL_PATH(../../HAL, tft/tft_ltdc.h)
#else
- #error "TFT IO only supports SPI or FSMC interface"
+ #error "TFT IO only supports SPI, FSMC or LTDC interface"
#endif
#define TFT_EXCHANGE_XY (1UL << 1)
@@ -91,6 +93,7 @@
#define TOUCH_ORIENTATION TOUCH_LANDSCAPE
#endif
+#define LTDC_RGB 0xABAB
#define SSD1963 0x5761
#define ST7735 0x89F0
#define ST7789 0x8552
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index e4c692a3b9..7634d49199 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -631,6 +631,8 @@
#include "stm32f7/pins_REMRAM_V1.h" // STM32F7 env:REMRAM_V1
#elif MB(NUCLEO_F767ZI)
#include "stm32f7/pins_NUCLEO_F767ZI.h" // STM32F7 env:NUCLEO_F767ZI
+#elif MB(BTT_SKR_SE_BX)
+ #include "stm32h7/pins_BTT_SKR_SE_BX.h" // STM32H7 env:BTT_SKR_SE_BX
#elif MB(TEENSY41)
#include "teensy4/pins_TEENSY41.h" // Teensy-4.x env:teensy41
#elif MB(T41U5XBB)
diff --git a/Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX.h b/Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX.h
new file mode 100644
index 0000000000..320d04e0b1
--- /dev/null
+++ b/Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX.h
@@ -0,0 +1,226 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#if NOT_TARGET(STM32H7)
+ #error "Oops! Select an STM32H7 board in 'Tools > Board.'"
+#endif
+
+#define BOARD_INFO_NAME "BTT SKR SE BX"
+#define DEFAULT_MACHINE_NAME "BIQU-BX"
+
+// Onboard I2C EEPROM
+#define I2C_EEPROM
+#define MARLIN_EEPROM_SIZE 0x1000 // 4KB (24C32 ... 32Kb = 4KB)
+
+// USB Flash Drive support
+#define HAS_OTG_USB_HOST_SUPPORT
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN PB11
+#define X_MAX_PIN PD13
+#define Y_MIN_PIN PB12
+#define Y_MAX_PIN PB13
+#define Z_MIN_PIN PD12
+#define Z_MAX_PIN PD11
+
+#define FIL_RUNOUT_PIN PD13
+#define FIL_RUNOUT2_PIN PB13
+
+#define LED_PIN PA13
+#define BEEPER_PIN PA14
+
+#define TFT_BACKLIGHT_PIN PB5
+
+#define POWER_MONITOR_PIN PB0
+#define RPI_POWER_PIN PE5
+
+#define SAFE_POWER_PIN PI11
+#define SERVO0_PIN PA2
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+ #define Z_MIN_PROBE_PIN PH2 // Probe
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN PG13
+#define X_DIR_PIN PG12
+#define X_ENABLE_PIN PG14
+#define X_CS_PIN PG10
+
+#define Y_STEP_PIN PB3
+#define Y_DIR_PIN PD3
+#define Y_ENABLE_PIN PB4
+#define Y_CS_PIN PD4
+
+#define Z_STEP_PIN PD7
+#define Z_DIR_PIN PD6
+#define Z_ENABLE_PIN PG9
+#define Z_CS_PIN PD5
+
+#define E0_STEP_PIN PC14
+#define E0_DIR_PIN PC13
+#define E0_ENABLE_PIN PC15
+#define E0_CS_PIN PI8
+
+#define E1_STEP_PIN PA8
+#define E1_DIR_PIN PC9
+#define E1_ENABLE_PIN PD2
+#define E1_CS_PIN PC8
+
+//
+// Software SPI pins for TMC2130 stepper drivers
+//
+#if ENABLED(TMC_USE_SW_SPI)
+ #ifndef TMC_SW_MOSI
+ #define TMC_SW_MOSI PC6
+ #endif
+ #ifndef TMC_SW_MISO
+ #define TMC_SW_MISO PG3
+ #endif
+ #ifndef TMC_SW_SCK
+ #define TMC_SW_SCK PC7
+ #endif
+#endif
+
+#if HAS_TMC_UART
+ /**
+ * TMC2208/TMC2209 stepper drivers
+ *
+ * Hardware serial communication ports.
+ * If undefined software serial is used according to the pins below
+ */
+ //#define X_HARDWARE_SERIAL Serial
+ //#define X2_HARDWARE_SERIAL Serial1
+ //#define Y_HARDWARE_SERIAL Serial1
+ //#define Y2_HARDWARE_SERIAL Serial1
+ //#define Z_HARDWARE_SERIAL Serial1
+ //#define Z2_HARDWARE_SERIAL Serial1
+ //#define E0_HARDWARE_SERIAL Serial1
+ //#define E1_HARDWARE_SERIAL Serial1
+ //#define E2_HARDWARE_SERIAL Serial1
+ //#define E3_HARDWARE_SERIAL Serial1
+ //#define E4_HARDWARE_SERIAL Serial1
+ //#define E5_HARDWARE_SERIAL Serial1
+ //#define E6_HARDWARE_SERIAL Serial1
+ //#define E7_HARDWARE_SERIAL Serial1
+
+ //
+ // Software serial
+ //
+ #define X_SERIAL_TX_PIN PG10
+ #define X_SERIAL_RX_PIN PG10
+
+ #define Y_SERIAL_TX_PIN PD4
+ #define Y_SERIAL_RX_PIN PD4
+
+ #define Z_SERIAL_TX_PIN PD5
+ #define Z_SERIAL_RX_PIN PD5
+
+ #define E0_SERIAL_TX_PIN PI8
+ #define E0_SERIAL_RX_PIN PI8
+
+ #define E1_SERIAL_TX_PIN PC8
+ #define E1_SERIAL_RX_PIN PC8
+
+ // Reduce baud rate to improve software serial reliability
+ #define TMC_BAUD_RATE 19200
+#endif
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN PH4 // TH0
+#define TEMP_1_PIN PA3 // TH1
+#define TEMP_BED_PIN PH5 // TB
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN PC4
+#define HEATER_1_PIN PC5
+#define HEATER_BED_PIN PA4
+
+#define FAN_PIN PA5 // "FAN0"
+#define FAN1_PIN PA6 // "FAN1"
+#define FAN2_PIN PA7 // "FAN2"
+
+#define NEOPIXEL_PIN PH3
+#define NEOPIXEL2_PIN PB1
+
+#if HAS_LTDC_TFT
+
+ // LTDC_LCD Timing
+ #define LTDC_LCD_CLK 50 // LTDC clock frequency = 50Mhz
+ #define LTDC_LCD_HSYNC 30 // Horizontal synchronization
+ #define LTDC_LCD_HBP 114 // Horizontal back porch
+ #define LTDC_LCD_HFP 16 // Horizontal front porch
+ #define LTDC_LCD_VSYNC 3 // Vertical synchronization
+ #define LTDC_LCD_VBP 32 // Vertical back porch
+ #define LTDC_LCD_VFP 10 // Vertical front porch
+
+ #define TFT_BACKLIGHT_PIN PB5
+ #define LCD_DE_PIN PF10
+ #define LCD_CLK_PIN PG7
+ #define LCD_VSYNC_PIN PI9
+ #define LCD_HSYNC_PIN PI10
+ #define LCD_R7_PIN PG6 // R5
+ #define LCD_R6_PIN PH12
+ #define LCD_R5_PIN PH11
+ #define LCD_R4_PIN PH10
+ #define LCD_R3_PIN PH9
+ #define LCD_G7_PIN PI2 // G6
+ #define LCD_G6_PIN PI1
+ #define LCD_G5_PIN PI0
+ #define LCD_G4_PIN PH15
+ #define LCD_G3_PIN PH14
+ #define LCD_G2_PIN PH13
+ #define LCD_B7_PIN PI7 // B5
+ #define LCD_B6_PIN PI6
+ #define LCD_B5_PIN PI5
+ #define LCD_B4_PIN PI4
+ #define LCD_B3_PIN PG11
+
+#endif
+
+#define BTN_EN1 PH6
+#define BTN_EN2 PH7
+#define BTN_ENC PH8
+
+#ifndef SDCARD_CONNECTION
+ #define SDCARD_CONNECTION ONBOARD
+#endif
+
+#define SOFTWARE_SPI
+#define SDSS PA15
+#define SS_PIN SDSS
+#define SD_SCK_PIN PC10
+#define SD_MISO_PIN PC11
+#define SD_MOSI_PIN PC12
+#define SD_DETECT_PIN PI3
diff --git a/buildroot/share/PlatformIO/boards/BTT_SKR_SE_BX.json b/buildroot/share/PlatformIO/boards/BTT_SKR_SE_BX.json
new file mode 100644
index 0000000000..920b2478a9
--- /dev/null
+++ b/buildroot/share/PlatformIO/boards/BTT_SKR_SE_BX.json
@@ -0,0 +1,56 @@
+{
+ "build": {
+ "core": "stm32",
+ "cpu": "cortex-m7",
+ "extra_flags": "-DSTM32H743xx",
+ "f_cpu": "400000000L",
+ "mcu": "stm32h743iit6",
+ "variant": "BTT_SKR_SE_BX"
+ },
+ "debug": {
+ "jlink_device": "STM32H743II",
+ "openocd_target": "stm32h7x",
+ "svd_path": "STM32H7x3.svd",
+ "tools": {
+ "stlink": {
+ "server": {
+ "arguments": [
+ "-f",
+ "scripts/interface/stlink.cfg",
+ "-c",
+ "transport select hla_swd",
+ "-f",
+ "scripts/target/stm32h7x.cfg",
+ "-c",
+ "reset_config none"
+ ],
+ "executable": "bin/openocd",
+ "package": "tool-openocd"
+ }
+ }
+ }
+ },
+ "frameworks": [
+ "arduino",
+ "stm32cube"
+ ],
+ "name": "STM32H743II (1024k RAM. 2048k Flash)",
+ "upload": {
+ "disable_flushing": false,
+ "maximum_ram_size": 1048576,
+ "maximum_size": 2097152,
+ "protocol": "stlink",
+ "protocols": [
+ "stlink",
+ "dfu",
+ "jlink",
+ "cmsis-dap"
+ ],
+ "offset_address": "0x8020000",
+ "require_upload_port": true,
+ "use_1200bps_touch": false,
+ "wait_for_upload_port": false
+ },
+ "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32h743ii.html",
+ "vendor": "Generic"
+}
diff --git a/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/PeripheralPins.c b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/PeripheralPins.c
new file mode 100644
index 0000000000..3defef5fbf
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/PeripheralPins.c
@@ -0,0 +1,491 @@
+/*
+ *******************************************************************************
+ * Copyright (c) 2019, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ * Automatically generated from STM32H743ZITx.xml
+ */
+#include "Arduino.h"
+#include "PeripheralPins.h"
+
+/* =====
+ * Note: Commented lines are alternative possibilities which are not used per default.
+ * If you change them, you will have to know what you do
+ * =====
+ */
+
+//*** ADC ***
+
+#ifdef HAL_ADC_MODULE_ENABLED
+WEAK const PinMap PinMap_ADC[] = {
+ {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_INP15
+ {PH_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_INP15
+ {PH_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC3_INP16
+ {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_INP16
+ {PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)}, // ADC1_INP17
+ {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_INP14
+ {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC1_INP18
+ {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC1_INP19
+ {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_INP3
+ {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_INP7
+ {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_INP9
+ {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_INP5
+ {PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_INP10
+ {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_INN10
+ {PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_INN0
+ {PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_INP1
+ {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_INP4
+ {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_INP8
+ {PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_INP5
+ {PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_INP9
+ {PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_INP4
+ {PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_INP8
+ {PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_INP3
+ {PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_INP7
+ {PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_INP2
+ {PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_INP6
+ {PF_11, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_INP2
+ {PF_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_INP6
+ {PF_13, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_INP2
+ {PF_14, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_INP6
+ {NC, NP, 0}
+};
+#endif
+
+//*** DAC ***
+
+#ifdef HAL_DAC_MODULE_ENABLED
+WEAK const PinMap PinMap_DAC[] = {
+ {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC1_OUT1
+ {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC1_OUT2
+ {NC, NP, 0}
+};
+#endif
+
+//*** I2C ***
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SDA[] = {
+ // {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // LD2 LED_BLUE (ZI)
+ {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_7, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)}, // LD2 LED_BLUE (ZI)
+ // {PB_9, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
+ {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ // {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
+ {PD_13, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+ {PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PF_15, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_I2C_MODULE_ENABLED
+WEAK const PinMap PinMap_I2C_SCL[] = {
+ // {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, // USB SOF
+ // {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // QSPI_CS
+ {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
+ {PB_6, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)}, // QSPI_CS
+ // {PB_8, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C4)},
+ {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PD_12, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+ {PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
+ {PF_14, I2C4, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C4)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** PWM ***
+
+#ifdef HAL_TIM_MODULE_ENABLED
+WEAK const PinMap PinMap_PWM[] = {
+ // {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ // {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
+ // {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - ETH RMII Ref Clk
+ // {PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2 - ETH RMII Ref Clk
+ // {PA_1, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N - ETH RMII Ref Clk
+ // {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ETH RMII MDIO
+ {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3 - ETH RMII MDIO
+ // {PA_2, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 0)}, // TIM15_CH1 - ETH RMII MDIO
+ // {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
+ // {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
+ {PA_3, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 2, 0)}, // TIM15_CH2
+ // {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ {PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
+ // {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
+ // {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - Used by ETH when JP6(ZI)/SB31(ZI2) ON
+ // {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - Used by ETH when JP6(ZI)/SB31(ZI2) ON
+ // {PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N - Used by ETH when JP6(ZI)/SB31(ZI2) ON
+ {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1 - Used by ETH when JP6(ZI)/SB31(ZI2) ON
+ // {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 - USB SOF
+ // {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2 - USB VBUS
+ // {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3 - USB ID
+ // {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4 - USB DM
+ // {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
+ {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - LD1 LED_GREEN
+ // {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - LD1 LED_GREEN
+ // {PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N - LD1 LED_GREEN
+ // {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+ // {PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
+ // {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 - SWO
+ {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ // {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
+ {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
+ // {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - LD2 LED_BLUE (ZI)
+ {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N - LD2 LED_BLUE (ZI)
+ {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
+ // {PB_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
+ // {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
+ {PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
+ // {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
+ // {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
+ // {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N - Used by ETH when JP7(ZI)/JP6(ZI2) ON
+ {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N - LD3 LED_RED
+ // {PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N - LD3 LED_RED
+ // {PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 1, 0)}, // TIM12_CH1 - LD3 LED_RED
+ // {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ {PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
+ // {PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM12, 2, 0)}, // TIM12_CH2
+ // {PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
+ {PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
+ {PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
+ // {PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
+ // {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
+ {PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
+ {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
+ // {PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
+ {PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
+ {PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
+ {PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
+ {PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
+ {PE_4, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 1)}, // TIM15_CH1N
+ {PE_5, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 1, 0)}, // TIM15_CH1
+ {PE_6, TIM15, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM15, 2, 0)}, // TIM15_CH2
+ {PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
+ {PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
+ {PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
+ {PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
+ {PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
+ {PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
+ {PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
+ {PF_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 0)}, // TIM16_CH1
+ {PF_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 0)}, // TIM17_CH1
+ {PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
+ // {PF_8, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM16, 1, 1)}, // TIM16_CH1N
+ {PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
+ // {PF_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM17, 1, 1)}, // TIM17_CH1N
+ {NC, NP, 0}
+};
+#endif
+
+//*** SERIAL ***
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_TX[] = {
+ {PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // ETH RMII MDIO
+ // {PA_9, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // USB VBUS
+ {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB VBUS
+ // {PA_12, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)}, // USB DP
+ //{PA_15, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
+ //{PB_4, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
+ // {PB_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)},
+ // {PB_6, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
+ //{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
+ //{PB_9, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ // {PB_13, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)}, // Used by ETH when JP7(ZI)/JP6(ZI2) ON
+ // {PB_14, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)}, // LD3 LED_RED
+ //{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ //{PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ //{PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ //{PD_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ //{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ //{PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // STLink TX
+ //{PE_1, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)}, //LD2 LED_YELLOW (ZI2)
+ //{PE_8, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PF_7, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RX[] = {
+ {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // ETH RMII Ref Clk
+ // {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ // {PA_8, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)}, // USB SOF
+ // {PA_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // USB ID
+ {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB ID
+ // {PA_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)}, // USB DM
+ //{PB_3, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)}, // SWO
+ //{PB_5, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
+ // {PB_7, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)}, // LD2 LED_BLUE (ZI)
+ // {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // LD2 LED_BLUE (ZI)
+ //{PB_8, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ //{PB_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
+ //{PB_15, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
+ //{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ //{PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ //{PD_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ //{PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ //{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ //{PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // STLink RX
+ //{PE_0, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
+ //{PE_7, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PF_6, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ //{PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_RTS[] = {
+ // {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // ETH RMII Ref Clk
+ // {PA_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // USB DP
+ // {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB DP
+ {PA_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ // {PB_14, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // LD3 LED_RED
+ // {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // LD3 LED_RED
+ {PC_8, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ {PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PD_15, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
+ {PE_9, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ {PF_8, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ {PG_8, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ {PG_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_UART_MODULE_ENABLED
+WEAK const PinMap PinMap_UART_CTS[] = {
+ {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ // {PA_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // USB DM
+ // {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB DM
+ // {PB_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // LD1 LED_GREEN
+ // {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Used by ETH when JP7(ZI)/JP6(ZI2) ON
+ {PB_15, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
+ {PC_9, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
+ {PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
+ {PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
+ {PD_14, UART8, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART8)},
+ {PE_10, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ {PF_9, UART7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_UART7)},
+ // {PG_13, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ {PG_15, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART6)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** SPI ***
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MOSI[] = {
+ {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ //{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // Used by ETH when JP6(ZI)/SB31(ZI2) ON
+ // {PA_7, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)}, // Used by ETH when JP6(ZI)/SB31(ZI2) ON
+ // {PB_2, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
+ // {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // // {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI3)},
+ // // {PB_5, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ // {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // // {PC_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // ETH RMII MDC
+ // {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // {PD_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI3)},
+ // {PD_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // {PE_6, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ // {PE_14, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ // {PF_9, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ // {PF_11, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ // {PG_14, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_MISO[] = {
+ {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ // {PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // // {PA_6, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ // {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // // {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ // // {PB_4, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ // {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // LD3 LED_RED
+ // {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // {PE_5, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ // {PE_13, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ // {PF_8, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ // {PG_9, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // {PG_12, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SCLK[] = {
+ {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ // {PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // // {PA_5, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ // // {PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // USB VBUS
+ // // {PA_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // USB DP
+ // // {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // SWO
+ // // {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)}, // SWO
+ // {PB_3, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)}, // SWO
+ // {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // // {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // Used by ETH when JP7(ZI)/JP6(ZI2) ON
+ // {PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // {PE_2, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ // {PE_12, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ // {PF_7, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ // {PG_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // ETH RMII TX Enable
+ // {PG_13, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)}, // ETH RXII TXD0
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_SPI_MODULE_ENABLED
+WEAK const PinMap PinMap_SPI_SSEL[] = {
+ {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ // {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // // {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
+ // // {PA_4, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_SPI6)},
+ // // {PA_11, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // USB DM
+ // // {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ // // {PA_15, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI6)},
+ // {PB_4, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_SPI2)},
+ // {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
+ // {PE_4, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ // {PE_11, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
+ // {PF_6, SPI5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI5)},
+ // {PG_8, SPI6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI6)},
+ // {PG_10, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** CAN ***
+
+#ifdef HAL_CAN_MODULE_ENABLED
+WEAK const PinMap PinMap_CAN_RD[] = {
+ // {PA_11, CANFD1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, // USB DM
+ {PB_5, CANFD2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
+ {PB_8, CANFD1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ {PB_12, CANFD2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)},
+ {PD_0, CANFD1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_CAN_MODULE_ENABLED
+WEAK const PinMap PinMap_CAN_TD[] = {
+ // {PA_12, CANFD1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)}, // USB DP
+ {PB_6, CANFD2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)}, // QSPI_CS
+ {PB_7, CANFD2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)}, // LD2 LED_BLUE (ZI)
+ {PB_9, CANFD1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ // {PB_13, CANFD2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN2)}, // Used by ETH when JP7(ZI)/JP6(ZI2) ON
+ {PD_1, CANFD1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_FDCAN1)},
+ {NC, NP, 0}
+};
+#endif
+
+//*** ETHERNET ***
+
+#ifdef HAL_ETH_MODULE_ENABLED
+WEAK const PinMap PinMap_Ethernet[] = {
+ // {PA_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS
+ {PA_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_REF_CLK|ETH_RX_CLK
+ {PA_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDIO
+ // {PA_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_COL
+ {PA_7, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS_DV|ETH_RX_DV
+ // {PB_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD2
+ // {PB_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD3
+ // {PB_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT
+ // {PB_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
+ // {PB_10, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_ER
+ // {PB_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN
+ // {PB_12, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0
+ {PB_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
+ {PC_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDC
+ // {PC_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD2
+ // {PC_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_CLK
+ {PC_4, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD0
+ {PC_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD1
+ // {PE_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
+ // {PG_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT
+ {PG_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN
+ // {PG_12, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
+ {PG_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0
+ // {PG_14, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
+ {NC, NP, 0}
+};
+#endif
+
+//*** USB ***
+
+#ifdef HAL_PCD_MODULE_ENABLED
+WEAK const PinMap PinMap_USB_OTG_FS[] = {
+ // {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_FS)}, // USB_OTG_FS_SOF
+ // {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
+ // {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG1_FS)}, // USB_OTG_FS_ID
+ {PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_FS)}, // USB_OTG_FS_DM
+ {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG1_FS)}, // USB_OTG_FS_DP
+ {NC, NP, 0}
+};
+#endif
+
+#ifdef HAL_PCD_MODULE_ENABLED
+WEAK const PinMap PinMap_USB_OTG_HS[] = {
+#ifdef USE_USB_HS_IN_FS
+ // {PA_4, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG2_FS)}, // USB_OTG_HS_SOF
+ // {PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG2_FS)}, // USB_OTG_HS_ID
+ // {PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS - Used by ETH when JP7(ZI)/JP6(ZI2) ON
+ {PB_14, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG2_FS)}, // USB_OTG_HS_DM
+ {PB_15, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG2_FS)}, // USB_OTG_HS_DP
+#else
+ {PA_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D0
+ {PA_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_CK
+ {PB_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D1
+ {PB_1, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D2
+ {PB_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D7
+ {PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D3
+ {PB_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D4
+ {PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D5
+ {PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_D6 - Used by ETH when JP7(ZI)/JP6(ZI2) ON
+ {PC_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_STP
+ {PC_2, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_DIR
+ {PC_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG2_HS)}, // USB_OTG_HS_ULPI_NXT
+#endif /* USE_USB_HS_IN_FS */
+ {NC, NP, 0}
+};
+#endif
diff --git a/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/PinNamesVar.h b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/PinNamesVar.h
new file mode 100644
index 0000000000..118bc92f7e
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/PinNamesVar.h
@@ -0,0 +1,50 @@
+/* SYS_WKUP */
+#ifdef PWR_WAKEUP_PIN1
+SYS_WKUP1 = PA_0, /* SYS_WKUP0 */
+#endif
+#ifdef PWR_WAKEUP_PIN2
+SYS_WKUP2 = PA_2, /* SYS_WKUP1 */
+#endif
+#ifdef PWR_WAKEUP_PIN3
+SYS_WKUP3 = PC_13, /* SYS_WKUP2 */
+#endif
+#ifdef PWR_WAKEUP_PIN4
+SYS_WKUP4 = PI_8, /* SYS_WKUP3 - Manually added */
+#endif
+#ifdef PWR_WAKEUP_PIN5
+SYS_WKUP5 = PI_11, /* SYS_WKUP4 - Manually added */
+#endif
+#ifdef PWR_WAKEUP_PIN6
+SYS_WKUP6 = PC_1, /* SYS_WKUP5 */
+#endif
+#ifdef PWR_WAKEUP_PIN7
+SYS_WKUP7 = NC,
+#endif
+#ifdef PWR_WAKEUP_PIN8
+SYS_WKUP8 = NC,
+#endif
+/* USB */
+#ifdef USBCON
+USB_OTG_FS_SOF = PA_8,
+USB_OTG_FS_VBUS = PA_9,
+USB_OTG_FS_ID = PA_10,
+USB_OTG_FS_DM = PA_11,
+USB_OTG_FS_DP = PA_12,
+USB_OTG_HS_ULPI_D0 = PA_3,
+USB_OTG_HS_SOF = PA_4,
+USB_OTG_HS_ULPI_CK = PA_5,
+USB_OTG_HS_ULPI_D1 = PB_0,
+USB_OTG_HS_ULPI_D2 = PB_1,
+USB_OTG_HS_ULPI_D7 = PB_5,
+USB_OTG_HS_ULPI_D3 = PB_10,
+USB_OTG_HS_ULPI_D4 = PB_11,
+USB_OTG_HS_ID = PB_12,
+USB_OTG_HS_ULPI_D5 = PB_12,
+USB_OTG_HS_ULPI_D6 = PB_13,
+USB_OTG_HS_VBUS = PB_13,
+USB_OTG_HS_DM = PB_14,
+USB_OTG_HS_DP = PB_15,
+USB_OTG_HS_ULPI_STP = PC_0,
+USB_OTG_HS_ULPI_DIR = PC_2,
+USB_OTG_HS_ULPI_NXT = PC_3,
+#endif
diff --git a/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/hal_conf_extra.h b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/hal_conf_extra.h
new file mode 100644
index 0000000000..4050fe810f
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/hal_conf_extra.h
@@ -0,0 +1,479 @@
+/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_conf_default.h
+ * @brief HAL default configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2017 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32H7xx_HAL_CONF_DEFAULT_H
+#define __STM32H7xx_HAL_CONF_DEFAULT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief Include the default list of modules to be used in the HAL driver
+ * and manage module deactivation
+ */
+#include "stm32yyxx_hal_conf.h"
+#if 0
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DFSDM_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_DSI_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_FDCAN_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+#define HAL_HRTIM_MODULE_ENABLED
+#define HAL_HSEM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_JPEG_MODULE_ENABLED
+#define HAL_LPTIM_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_MDIOS_MODULE_ENABLED
+#define HAL_MDMA_MODULE_ENABLED
+#define HAL_MMC_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_QSPI_MODULE_ENABLED
+#define HAL_RAMECC_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPDIFRX_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SWPMI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#endif
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+#define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal oscillator (CSI) default value.
+ * This value is the default CSI value after Reset.
+ */
+#if !defined (CSI_VALUE)
+#define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* CSI_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+#define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ * This value is used by the UART, RTC HAL module to compute the system frequency
+ */
+#if !defined (LSE_VALUE)
+#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+#if !defined (LSI_VALUE)
+#define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+The real value may vary depending on the variations
+in voltage and temperature.*/
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#if !defined (VDD_VALUE)
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#endif
+#if !defined (TICK_INT_PRIORITY)
+#define TICK_INT_PRIORITY ((uint32_t)0x00) /*!< tick interrupt priority */
+#endif
+#if !defined (USE_RTOS)
+#define USE_RTOS 0
+#endif
+#if !defined (USE_SD_TRANSCEIVER)
+#define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */
+#endif
+#if !defined (USE_SPI_CRC)
+#define USE_SPI_CRC 0U /*!< use CRC in SPI */
+#endif
+
+#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
+#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
+#define USE_HAL_COMP_REGISTER_CALLBACKS 0U /* COMP register callback disabled */
+#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
+#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
+#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
+#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
+#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
+#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
+#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
+#define USE_HAL_FDCAN_REGISTER_CALLBACKS 0U /* FDCAN register callback disabled */
+#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
+#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
+#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
+#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
+#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
+#define USE_HAL_HCD_REGISTER_CALLBACKS 1U /* HCD register callback disabled */
+#define USE_HAL_HRTIM_REGISTER_CALLBACKS 0U /* HRTIM register callback disabled */
+#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
+#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
+#define USE_HAL_JPEG_REGISTER_CALLBACKS 0U /* JPEG register callback disabled */
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
+#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
+#define USE_HAL_MDIOS_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */
+#define USE_HAL_OPAMP_REGISTER_CALLBACKS 0U /* MDIO register callback disabled */
+#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
+#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
+#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
+#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
+#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
+#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
+#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
+#define USE_HAL_SWPMI_REGISTER_CALLBACKS 0U /* SWPMI register callback disabled */
+#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
+#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
+
+/* ########################### Ethernet Configuration ######################### */
+#define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */
+#define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */
+
+#define ETH_MAC_ADDR0 ((uint8_t)0x02)
+#define ETH_MAC_ADDR1 ((uint8_t)0x00)
+#define ETH_MAC_ADDR2 ((uint8_t)0x00)
+#define ETH_MAC_ADDR3 ((uint8_t)0x00)
+#define ETH_MAC_ADDR4 ((uint8_t)0x00)
+#define ETH_MAC_ADDR5 ((uint8_t)0x00)
+
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1 */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32h7xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32h7xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32h7xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_MDMA_MODULE_ENABLED
+#include "stm32h7xx_hal_mdma.h"
+#endif /* HAL_MDMA_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+#include "stm32h7xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+#include "stm32h7xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+#include "stm32h7xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+#include "stm32h7xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+#include "stm32h7xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+#include "stm32h7xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32h7xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32h7xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32h7xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_FDCAN_MODULE_ENABLED
+#include "stm32h7xx_hal_fdcan.h"
+#endif /* HAL_FDCAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+#include "stm32h7xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+#include "stm32h7xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32h7xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+#include "stm32h7xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32h7xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32h7xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+#include "stm32h7xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+#include "stm32h7xx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+#include "stm32h7xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+#include "stm32h7xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+#include "stm32h7xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32h7xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+#include "stm32h7xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32h7xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_JPEG_MODULE_ENABLED
+#include "stm32h7xx_hal_jpeg.h"
+#endif /* HAL_JPEG_MODULE_ENABLED */
+
+#ifdef HAL_MDIOS_MODULE_ENABLED
+#include "stm32h7xx_hal_mdios.h"
+#endif /* HAL_MDIOS_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+#include "stm32h7xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32h7xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+#include "stm32h7xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+#include "stm32h7xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32h7xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+#include "stm32h7xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RAMECC_MODULE_ENABLED
+#include "stm32h7xx_hal_ramecc.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+#include "stm32h7xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32h7xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+#include "stm32h7xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+#include "stm32h7xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+#include "stm32h7xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32h7xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+#include "stm32h7xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_SWPMI_MODULE_ENABLED
+#include "stm32h7xx_hal_swpmi.h"
+#endif /* HAL_SWPMI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32h7xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32h7xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32h7xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32h7xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32h7xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+#include "stm32h7xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32h7xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32h7xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+#include "stm32h7xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t *file, uint32_t line);
+#else
+#define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32H7xx_HAL_CONF_DEFAULT_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/ldscript.ld b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/ldscript.ld
new file mode 100644
index 0000000000..5e01911d82
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/ldscript.ld
@@ -0,0 +1,208 @@
+/*
+******************************************************************************
+**
+** File : LinkerScript.ld
+**
+** Author : Auto-generated by STM32CubeIDE
+**
+** Abstract : Linker script for NUCLEO-H743II(2) Board embedding STM32H743IITx Device from STM32H7 series
+** 2048Kbytes FLASH
+** 128Kbytes DTCMRAM
+** 64Kbytes ITCMRAM
+** 512Kbytes RAM_D1
+** 288Kbytes RAM_D2
+** 64Kbytes RAM_D3
+**
+** Set heap size, stack size and stack location according
+** to application requirements.
+**
+** Set memory bank area and size if external memory is used.
+**
+** Target : STMicroelectronics STM32
+**
+** Distribution: The file is distributed as is without any warranty
+** of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** © COPYRIGHT(c) 2019 STMicroelectronics
+**
+** Redistribution and use in source and binary forms, with or without modification,
+** are permitted provided that the following conditions are met:
+** 1. Redistributions of source code must retain the above copyright notice,
+** this list of conditions and the following disclaimer.
+** 2. Redistributions in binary form must reproduce the above copyright notice,
+** this list of conditions and the following disclaimer in the documentation
+** and/or other materials provided with the distribution.
+** 3. Neither the name of STMicroelectronics nor the names of its contributors
+** may be used to endorse or promote products derived from this software
+** without specific prior written permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x24080000; /* end of "RAM_D1" Ram type memory */
+
+_Min_Heap_Size = 0x200; /* required amount of heap */
+_Min_Stack_Size = 0x400; /* required amount of stack */
+
+/* Memories definition */
+MEMORY
+{
+ DTCMRAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
+ ITCMRAM (xrw) : ORIGIN = 0x00000000, LENGTH = 64K
+ RAM_D1 (xrw) : ORIGIN = 0x24000000, LENGTH = 512K
+ RAM_D2 (xrw) : ORIGIN = 0x30000000, LENGTH = 288K
+ RAM_D3 (xrw) : ORIGIN = 0x38000000, LENGTH = 64K
+ FLASH (rx) : ORIGIN = 0x8020000, LENGTH = 2048K - 128K
+}
+
+/* Sections */
+SECTIONS
+{
+ /* The startup code into "FLASH" Rom type memory */
+ .isr_vector :
+ {
+ . = ALIGN(4);
+ KEEP(*(.isr_vector)) /* Startup code */
+ . = ALIGN(4);
+ } >FLASH
+
+ /* The program code and other data into "FLASH" Rom type memory */
+ .text :
+ {
+ . = ALIGN(4);
+ *(.text) /* .text sections (code) */
+ *(.text*) /* .text* sections (code) */
+ *(.glue_7) /* glue arm to thumb code */
+ *(.glue_7t) /* glue thumb to arm code */
+ *(.eh_frame)
+
+ KEEP (*(.init))
+ KEEP (*(.fini))
+
+ . = ALIGN(4);
+ _etext = .; /* define a global symbols at end of code */
+ } >FLASH
+
+ /* Constant data into "FLASH" Rom type memory */
+ .rodata :
+ {
+ . = ALIGN(4);
+ *(.rodata) /* .rodata sections (constants, strings, etc.) */
+ *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM.extab : {
+ . = ALIGN(4);
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ . = ALIGN(4);
+ } >FLASH
+
+ .ARM : {
+ . = ALIGN(4);
+ __exidx_start = .;
+ *(.ARM.exidx*)
+ __exidx_end = .;
+ . = ALIGN(4);
+ } >FLASH
+
+ .preinit_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP (*(.preinit_array*))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .init_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array*))
+ PROVIDE_HIDDEN (__init_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ .fini_array :
+ {
+ . = ALIGN(4);
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP (*(SORT(.fini_array.*)))
+ KEEP (*(.fini_array*))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+ . = ALIGN(4);
+ } >FLASH
+
+ /* Used by the startup to initialize data */
+ _sidata = LOADADDR(.data);
+
+ /* Initialized data sections into "RAM_D1" Ram type memory */
+ .data :
+ {
+ . = ALIGN(4);
+ _sdata = .; /* create a global symbol at data start */
+ *(.data) /* .data sections */
+ *(.data*) /* .data* sections */
+
+ . = ALIGN(4);
+ _edata = .; /* define a global symbol at data end */
+
+ } >RAM_D1 AT> FLASH
+
+ /* Uninitialized data section into "RAM_D1" Ram type memory */
+ . = ALIGN(4);
+ .bss :
+ {
+ /* This is used by the startup in order to initialize the .bss secion */
+ _sbss = .; /* define a global symbol at bss start */
+ __bss_start__ = _sbss;
+ *(.bss)
+ *(.bss*)
+ *(COMMON)
+
+ . = ALIGN(4);
+ _ebss = .; /* define a global symbol at bss end */
+ __bss_end__ = _ebss;
+ } >RAM_D1
+
+ /* User_heap_stack section, used to check that there is enough "RAM_D1" Ram type memory left */
+ ._user_heap_stack :
+ {
+ . = ALIGN(8);
+ PROVIDE ( end = . );
+ PROVIDE ( _end = . );
+ . = . + _Min_Heap_Size;
+ . = . + _Min_Stack_Size;
+ . = ALIGN(8);
+ } >RAM_D1
+
+ /* Remove information from the compiler libraries */
+ /DISCARD/ :
+ {
+ libc.a ( * )
+ libm.a ( * )
+ libgcc.a ( * )
+ }
+
+ .ARM.attributes 0 : { *(.ARM.attributes) }
+}
diff --git a/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/variant.cpp b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/variant.cpp
new file mode 100644
index 0000000000..203e9fc9b8
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/variant.cpp
@@ -0,0 +1,332 @@
+#include "pins_arduino.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Pin number
+const PinName digitalPin[] = {
+ PE_2, // D0
+ PE_3, // D1
+ PE_4, // D2
+ PE_5, // D3
+ PE_6, // D4
+ PI_8, // D5
+ PC_13, // D6
+ PC_14, // D7
+ PC_15, // D8
+ PI_9, // D9
+ PI_10, // D10
+ PI_11, // D11
+ PF_0, // D12
+ PF_1, // D13
+ PF_2, // D14
+ PH_0, // D15
+ PH_1, // D16
+ PB_2, // D17
+ PF_15, // D18
+ PG_0, // D19
+ PG_1, // D20
+ PE_7, // D21
+ PE_8, // D22
+ PE_9, // D23
+ PE_10, // D24
+ PE_11, // D25
+ PE_12, // D26
+ PE_13, // D27
+ PE_14, // D28
+ PE_15, // D29
+ PB_10, // D30
+ PB_11, // D31
+ PH_6, // D32
+ PH_7, // D33
+ PH_8, // D34
+ PH_9, // D35
+ PH_10, // D36
+ PH_11, // D37
+ PH_12, // D38
+ PB_12, // D39
+ PB_13, // D40
+ PB_14, // D41
+ PB_15, // D42
+ PD_8, // D43
+ PD_9, // D44
+ PD_10, // D45
+ PD_11, // D46
+ PD_12, // D47
+ PD_13, // D48
+ PD_14, // D49
+ PD_15, // D50
+ PG_2, // D51
+ PG_3, // D52
+ PG_4, // D53
+ PG_5, // D54
+ PG_6, // D55
+ PG_7, // D56
+ PG_8, // D57
+ PC_6, // D58
+ PC_7, // D59
+ PC_8, // D60
+ PC_9, // D61
+ PA_8, // D62
+ PA_9, // D63
+ PA_10, // D64
+ PA_11, // D65
+ PA_12, // D66
+ PA_13, // D67
+ PH_13, // D68
+ PH_14, // D69
+ PH_15, // D70
+ PI_0, // D71
+ PI_1, // D72
+ PI_2, // D73
+ PI_3, // D74
+ PA_14, // D75
+ PA_15, // D76
+ PC_10, // D77
+ PC_11, // D78
+ PC_12, // D79
+ PD_0, // D80
+ PD_1, // D81
+ PD_2, // D82
+ PD_3, // D83
+ PD_4, // D84
+ PD_5, // D85
+ PD_6, // D86
+ PD_7, // D87
+ PG_9, // D88
+ PG_10, // D89
+ PG_11, // D90
+ PG_12, // D91
+ PG_13, // D92
+ PG_14, // D93
+ PG_15, // D94
+ PB_3, // D95
+ PB_4, // D96
+ PB_5, // D97
+ PB_6, // D98
+ PB_7, // D99
+ PB_8, // D100
+ PB_9, // D101
+ PE_0, // D102
+ PE_1, // D103
+ PI_4, // D104
+ PI_5, // D105
+ PI_6, // D106
+ PI_7, // D107
+ PA_0, // D108 / A0
+ PA_1, // D109 / A1
+ PA_2, // D110 / A2
+ PA_3, // D111 / A3
+ PA_4, // D112 / A4
+ PA_5, // D113 / A5
+ PA_6, // D114 / A6
+ PA_7, // D115 / A7
+ PB_0, // D116 / A8
+ PB_1, // D117 / A9
+ PH_2, // D118 / A10
+ PH_3, // D119 / A11
+ PH_4, // D120 / A12
+ PH_5, // D121 / A13
+ PC_0, // D122 / A14
+ PC_1, // D123 / A15
+ PC_2, // D124 / A16
+ PC_3, // D125 / A17
+ PC_4, // D126 / A18
+ PC_5, // D127 / A19
+ PF_3, // D128 / A20
+ PF_4, // D129 / A21
+ PF_5, // D130 / A22
+ PF_6, // D131 / A23
+ PF_7, // D132 / A24
+ PF_8, // D133 / A25
+ PF_9, // D134 / A26
+ PF_10, // D135 / A27
+ PF_11, // D136 / A28
+ PF_12, // D137 / A29
+ PF_13, // D138 / A30
+ PF_14, // D139 / A31
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+// ----------------------------------------------------------------------------
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void SystemClockStartupInit() {
+ // Confirm is called only once time to avoid hang up caused by repeated calls in USB wakeup interrupt
+ static bool first_call = true;
+ if (!first_call) return;
+ first_call = false;
+
+ // Clear all clock setting register
+ RCC->CR = 0x00000001;
+ RCC->CFGR = 0x00000000;
+ RCC->D1CFGR = 0x00000000;
+ RCC->D2CFGR = 0x00000000;
+ RCC->D3CFGR = 0x00000000;
+ RCC->PLLCKSELR = 0x00000000;
+ RCC->PLLCFGR = 0x00000000;
+ RCC->CIER = 0x00000000;
+
+ // AXI_TARG7_FN_MOD for SRAM
+ *((volatile uint32_t*)0x51008108)=0x00000001;
+
+ // Enable L1-Cache
+ SCB_EnableICache();
+ SCB_EnableDCache();
+ SCB->CACR |= 1<<2;
+
+ PWR->CR3 &= ~(1 << 2); // SCUEN=0
+ PWR->D3CR |= 3 << 14; // VOS=3,Scale1,1.15~1.26V core voltage
+ while((PWR->D3CR & (1 << 13)) == 0); // Wait for the voltage to stabilize
+ RCC->CR |= 1<<16; // Enable HSE
+
+ uint16_t timeout = 0;
+ while(((RCC->CR & (1 << 17)) == 0) && (timeout < 0X7FFF)) {
+ timeout++; // Wait for HSE RDY
+ }
+
+ if(timeout == 0X7FFF) {
+ Error_Handler();
+ } else {
+ RCC->PLLCKSELR |= 2 << 0; // PLLSRC[1:0] = 2, HSE for PLL clock source
+ RCC->PLLCKSELR |= 5 << 4; // DIVM1[5:0] = pllm, Prescaler for PLL1
+ RCC->PLL1DIVR |= (160 - 1) << 0; // DIVN1[8:0] = plln - 1, Multiplication factor for PLL1 VCO
+ RCC->PLL1DIVR |= (2 - 1) << 9; // DIVP1[6:0] = pllp - 1, PLL1 DIVP division factor
+ RCC->PLL1DIVR |= (4 - 1) << 16; // DIVQ1[6:0] = pllq - 1, PLL1 DIVQ division factor
+ RCC->PLL1DIVR |= 1 << 24; // DIVR1[6:0] = pllr - 1, PLL1 DIVR division factor
+ RCC->PLLCFGR |= 2 << 2; // PLL1 input (ref1_ck) clock range frequency is between 4 and 8 MHz
+ RCC->PLLCFGR |= 0 << 1; // PLL1 VCO selection, 0: 192 to 836 MHz, 1 : 150 to 420 MHz
+ RCC->PLLCFGR |= 3 << 16; // pll1_q_ck and pll1_p_ck output is enabled
+ RCC->CR |= 1 << 24; // PLL1 enable
+ while((RCC->CR & (1 << 25)) == 0); // PLL1 clock ready flag
+
+ // PLL2 DIVR clock frequency = 220MHz, so that SDRAM clock can be set to 110MHz
+ RCC->PLLCKSELR |= 25 << 12; // DIVM2[5:0] = 25, Prescaler for PLL2
+ RCC->PLL2DIVR |= (440 - 1) << 0; // DIVN2[8:0] = 440 - 1, Multiplication factor for PLL2 VCO
+ RCC->PLL2DIVR |= (2 - 1) << 9; // DIVP2[6:0] = 2-1, PLL2 DIVP division factor
+ RCC->PLL2DIVR |= (2 - 1) << 24; // DIVR2[6:0] = 2-1, PLL2 DIVR division factor
+ RCC->PLLCFGR |= 0 << 6; // PLL2RGE[1:0]=0, PLL2 input (ref2_ck) clock range frequency is between 1 and 2 MHz
+ RCC->PLLCFGR |= 0 << 5; // PLL2 VCO selection, 0: 192 to 836 MHz, 1: 150 to 420 MHz
+ RCC->PLLCFGR |= 1 << 19; // pll2_p_ck output is enabled
+ RCC->PLLCFGR |= 1 << 21; // pll2_r_ck output is enabled
+ RCC->D1CCIPR &= ~(3 << 0); // clear FMC kernel clock source selection
+ RCC->D1CCIPR |= 2 << 0; // pll2_r_ck clock selected as kernel peripheral clock
+ RCC->CR |= 1 << 26; // PLL2 enable
+ while((RCC->CR&(1<<27)) == 0); // PLL2 clock ready flag
+
+ RCC->D1CFGR |= 8 << 0; // rcc_hclk3 = sys_d1cpre_ck / 2 = 400 / 2 = 200MHz. AHB1/2/3/4
+ RCC->D1CFGR |= 0 << 8; // sys_ck not divided, sys_d1cpre_ck = sys_clk / 1 = 400 / 1 = 400MHz, System Clock = 400MHz
+ RCC->CFGR |= 3 << 0; // PLL1 selected as system clock (pll1_p_ck). 400MHz
+ while(1) {
+ timeout = (RCC->CFGR & (7 << 3)) >> 3; // System clock switch status
+ if(timeout == 3) break; // Wait for SW[2:0] = 3 (011: PLL1 selected as system clock (pll1_p_ck))
+ }
+
+ FLASH->ACR |= 2 << 0; // LATENCY[2:0] = 2 (@VOS1 Level,maxclock=210MHz)
+ FLASH->ACR |= 2 << 4; // WRHIGHFREQ[1:0] = 2, flash access frequency < 285MHz
+
+ RCC->D1CFGR |= 4 << 4; // D1PPRE[2:0] = 4, rcc_pclk3 = rcc_hclk3 / 2 = 100MHz, APB3.
+ RCC->D2CFGR |= 4 << 4; // D2PPRE1[2:0] = 4, rcc_pclk1 = rcc_hclk1 / 2 = 100MHz, APB1.
+ RCC->D2CFGR |= 4 << 8; // D2PPRE2[2:0] = 4, rcc_pclk2 = rcc_hclk1 / 2 = 100MHz, APB2.
+ RCC->D3CFGR |= 4 << 4; // D3PPRE[2:0] = 4, rcc_pclk4 = rcc_hclk4 / 2 = 100MHz, APB4.
+
+ RCC->CR |= 1 << 7; // CSI clock enable
+ RCC->APB4ENR |= 1 << 1; // SYSCFG peripheral clock enable
+ SYSCFG->CCCSR |= 1 << 0;
+ }
+
+ // USB clock, (use HSI48 clock)
+ RCC->CR |= 1 << 12; // HSI48 clock enabl
+ while((RCC->CR & (1 << 13)) == 0);// 1: HSI48 clock is ready
+ RCC->APB1HENR |= 1 << 1; // CRS peripheral clock enabled
+ RCC->APB1HRSTR |= 1 << 1; // Resets CRS
+ RCC->APB1HRSTR &= ~(1 << 1); // Does not reset CRS
+ CRS->CFGR &= ~(3 << 28); // USB2 SOF selected as SYNC signal source
+ CRS->CR |= 3 << 5; // Automatic trimming and Frequency error counter enabled
+ RCC->D2CCIP2R &= ~(3 << 20); // Clear USBOTG 1 and 2 kernel clock source selection
+ RCC->D2CCIP2R |= 3 << 20; // HSI48_ck clock is selected as kernel clock
+}
+
+uint8_t MPU_Convert_Bytes_To_POT(uint32_t nbytes)
+{
+ uint8_t count = 0;
+ while(nbytes != 1)
+ {
+ nbytes >>= 1;
+ count++;
+ }
+ return count;
+}
+
+uint8_t MPU_Set_Protection(uint32_t baseaddr, uint32_t size, uint32_t rnum, uint8_t ap, uint8_t sen, uint8_t cen, uint8_t ben)
+{
+ uint32_t tempreg = 0;
+ uint8_t rnr = 0;
+ if ((size % 32) || size == 0) return 1;
+ rnr = MPU_Convert_Bytes_To_POT(size) - 1;
+ SCB->SHCSR &= ~(1 << 16); //disable MemManage
+ MPU->CTRL &= ~(1 << 0); //disable MPU
+ MPU->RNR = rnum;
+ MPU->RBAR = baseaddr;
+ tempreg |= 0 << 28;
+ tempreg |= ((uint32_t)ap) << 24;
+ tempreg |= 0 << 19;
+ tempreg |= ((uint32_t)sen) << 18;
+ tempreg |= ((uint32_t)cen) << 17;
+ tempreg |= ((uint32_t)ben) << 16;
+ tempreg |= 0 << 8;
+ tempreg |= rnr << 1;
+ tempreg |= 1 << 0;
+ MPU->RASR = tempreg;
+ MPU->CTRL = (1 << 2) | (1 << 0); //enable PRIVDEFENA
+ SCB->SHCSR |= 1 << 16; //enable MemManage
+ return 0;
+}
+
+void MPU_Memory_Protection(void)
+{
+ MPU_Set_Protection(0x20000000, 128 * 1024, 1, MPU_REGION_FULL_ACCESS, 0, 1, 1); // protect DTCM 128k, Sharing is prohibited, cache is allowed, and buffering is allowed
+
+ MPU_Set_Protection(0x24000000, 512 * 1024, 2, MPU_REGION_FULL_ACCESS, 0, 1, 1); // protect AXI SRAM, Sharing is prohibited, cache is allowed, and buffering is allowed
+ MPU_Set_Protection(0x30000000, 512 * 1024, 3, MPU_REGION_FULL_ACCESS, 0, 1, 1); // protect SRAM1~SRAM3, Sharing is prohibited, cache is allowed, and buffering is allowed
+ MPU_Set_Protection(0x38000000, 64 * 1024, 4, MPU_REGION_FULL_ACCESS, 0, 1, 1); // protect SRAM4, Sharing is prohibited, cache is allowed, and buffering is allowed
+
+ MPU_Set_Protection(0x60000000, 64 * 1024 * 1024, 5, MPU_REGION_FULL_ACCESS, 0, 0, 0); // protect LCD FMC 64M, No sharing, no cache, no buffering
+ MPU_Set_Protection(0XC0000000, 32 * 1024 * 1024, 6, MPU_REGION_FULL_ACCESS, 0, 1, 1); // protect SDRAM 32M, Sharing is prohibited, cache is allowed, and buffering is allowed
+ MPU_Set_Protection(0X80000000, 256 * 1024 * 1024, 7, MPU_REGION_FULL_ACCESS, 0, 0, 0); // protect NAND FLASH 256M, No sharing, no cache, no buffering
+}
+
+/**
+ * @brief System Clock Configuration
+ * @param None
+ * @retval None
+ */
+WEAK void SystemClock_Config(void)
+{
+ SystemClockStartupInit();
+
+ MPU_Memory_Protection();
+
+ /* Update current SystemCoreClock value */
+ SystemCoreClockUpdate();
+
+ /* Configure the Systick interrupt time */
+ HAL_SYSTICK_Config(SystemCoreClock/1000);
+
+ /* Configure the Systick */
+ HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
+
+ /* SysTick_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
+}
+
+#ifdef __cplusplus
+}
+#endif
diff --git a/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/variant.h b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/variant.h
new file mode 100644
index 0000000000..5be18f9aa4
--- /dev/null
+++ b/buildroot/share/PlatformIO/variants/BTT_SKR_SE_BX/variant.h
@@ -0,0 +1,222 @@
+#ifndef _VARIANT_ARDUINO_STM32_
+#define _VARIANT_ARDUINO_STM32_
+#ifdef __cplusplus
+
+extern "C" {
+#endif // __cplusplus
+/*----------------------------------------------------------------------------
+ * Pins
+ *----------------------------------------------------------------------------*/
+#define PE2 0
+#define PE3 1
+#define PE4 2
+#define PE5 3
+#define PE6 4
+#define PI8 5
+#define PC13 6
+#define PC14 7
+#define PC15 8
+#define PI9 9
+#define PI10 10
+#define PI11 11
+#define PF0 12
+#define PF1 13
+#define PF2 14
+#define PH0 15
+#define PH1 16
+#define PB2 17
+#define PF15 18
+#define PG0 19
+#define PG1 20
+#define PE7 21
+#define PE8 22
+#define PE9 23
+#define PE10 24
+#define PE11 25
+#define PE12 26
+#define PE13 27
+#define PE14 28
+#define PE15 29
+#define PB10 30
+#define PB11 31
+#define PH6 32
+#define PH7 33
+#define PH8 34
+#define PH9 35
+#define PH10 36
+#define PH11 37
+#define PH12 38
+#define PB12 39
+#define PB13 40
+#define PB14 41
+#define PB15 42
+#define PD8 43
+#define PD9 44
+#define PD10 45
+#define PD11 46
+#define PD12 47
+#define PD13 48
+#define PD14 49
+#define PD15 50
+#define PG2 51
+#define PG3 52
+#define PG4 53
+#define PG5 54
+#define PG6 55
+#define PG7 56
+#define PG8 57
+#define PC6 58
+#define PC7 59
+#define PC8 60
+#define PC9 61
+#define PA8 62
+#define PA9 63
+#define PA10 64
+#define PA11 65
+#define PA12 66
+#define PA13 67
+#define PH13 68
+#define PH14 69
+#define PH15 70
+#define PI0 71
+#define PI1 72
+#define PI2 73
+#define PI3 74
+#define PA14 75
+#define PA15 76
+#define PC10 77
+#define PC11 78
+#define PC12 79
+#define PD0 80
+#define PD1 81
+#define PD2 82
+#define PD3 83
+#define PD4 84
+#define PD5 85
+#define PD6 86
+#define PD7 87
+#define PG9 88
+#define PG10 89
+#define PG11 90
+#define PG12 91
+#define PG13 92
+#define PG14 93
+#define PG15 94
+#define PB3 95
+#define PB4 96
+#define PB5 97
+#define PB6 98
+#define PB7 99
+#define PB8 100
+#define PB9 101
+#define PE0 102
+#define PE1 103
+#define PI4 104
+#define PI5 105
+#define PI6 106
+#define PI7 107
+#define PA0 108
+#define PA1 109
+#define PA2 110
+#define PA3 111
+#define PA4 112
+#define PA5 113
+#define PA6 114
+#define PA7 115
+#define PB0 116
+#define PB1 117
+#define PH2 118
+#define PH3 119
+#define PH4 120
+#define PH5 121
+#define PC0 122
+#define PC1 123
+#define PC2 124
+#define PC3 125
+#define PC4 126
+#define PC5 127
+#define PF3 128
+#define PF4 129
+#define PF5 130
+#define PF6 131
+#define PF7 132
+#define PF8 133
+#define PF9 134
+#define PF10 135
+#define PF11 136
+#define PF12 137
+#define PF13 138
+#define PF14 139
+
+// This must be a literal with the same value as PEND
+#define NUM_DIGITAL_PINS 140
+
+// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
+#define NUM_ANALOG_INPUTS 24
+#define NUM_ANALOG_FIRST 108
+
+// Timer Definitions
+//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
+#define TIMER_TONE TIM2
+#define TIMER_SERVO TIM5
+#define TIMER_SERIAL TIM7
+
+// UART1 for TFT port
+#define ENABLE_HWSERIAL1
+#define PIN_SERIAL1_RX PA10
+#define PIN_SERIAL1_TX PA9
+
+// UART4 for ESP-01 port
+#define ENABLE_HWSERIAL4
+#define PIN_SERIAL4_RX PA1
+#define PIN_SERIAL4_TX PA0
+
+// IIC1 for onboard 24C32 EEPROM
+#define PIN_WIRE_SDA PB9
+#define PIN_WIRE_SCL PB8
+
+// SPI3 for onboard SD card
+// #define PIN_SPI_MOSI PC12
+// #define PIN_SPI_MISO PC11
+// #define PIN_SPI_SCK PC10
+
+// HSE default value is 25MHz in HAL
+// HSE_BYPASS is 25MHz
+#ifndef HSE_BYPASS_NOT_USED
+ #define HSE_VALUE 25000000
+#endif
+
+// #define USE_USB_FS
+/* Extra HAL modules */
+//#define HAL_HCD_MODULE_ENABLED
+//#define HAL_DAC_MODULE_ENABLED
+//#define HAL_ETH_MODULE_ENABLED
+
+#ifdef __cplusplus
+} // extern "C"
+#endif
+/*----------------------------------------------------------------------------
+ * Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+// These serial port names are intended to allow libraries and architecture-neutral
+// sketches to automatically default to the correct port name for a particular type
+// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
+// the first hardware serial port whose RX/TX pins are not dedicated to another use.
+//
+// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
+//
+// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
+//
+// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
+//
+// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
+//
+// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
+// pins are NOT connected to anything by default.
+#define SERIAL_PORT_MONITOR Serial
+#define SERIAL_PORT_HARDWARE Serial
+#endif
+
+#endif /* _VARIANT_ARDUINO_STM32_ */
diff --git a/buildroot/tests/BTT_SKR_SE_BX b/buildroot/tests/BTT_SKR_SE_BX
new file mode 100755
index 0000000000..b5d6f6de83
--- /dev/null
+++ b/buildroot/tests/BTT_SKR_SE_BX
@@ -0,0 +1,18 @@
+#!/usr/bin/env bash
+#
+# Build tests for BTT_SKR_SE_BX
+#
+
+# exit on first failure
+set -e
+
+#
+# Build with the default configurations
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_BTT_SKR_SE_BX
+opt_set SERIAL_PORT 1
+exec_test $1 $2 "Default Configuration" "$3"
+
+# clean up
+restore_configs
diff --git a/ini/features.ini b/ini/features.ini
index 7399a22446..10eafdc559 100644
--- a/ini/features.ini
+++ b/ini/features.ini
@@ -37,7 +37,7 @@ HAS_WIRED_LCD = src_filter=+
HAS_MARLINUI_HD44780 = src_filter=+
HAS_MARLINUI_U8GLIB = U8glib-HAL@~0.4.1
src_filter=+
-HAS_(FSMC|SPI)_TFT = src_filter=+ + +
+HAS_(FSMC|SPI|LTDC)_TFT = src_filter=+ + +
HAS_FSMC_TFT = src_filter=+ +
HAS_SPI_TFT = src_filter=+ +
I2C_EEPROM = src_filter=+
diff --git a/ini/stm32f7.ini b/ini/stm32f7.ini
index 442ef5f9b0..d3fec7aebc 100644
--- a/ini/stm32f7.ini
+++ b/ini/stm32f7.ini
@@ -28,3 +28,28 @@ platform = ${common_stm32.platform}
extends = common_stm32
board = remram_v1
build_flags = ${common_stm32.build_flags}
+
+#
+# BigTreeTech SKR SE BX (STM32H743IIT6 ARM Cortex-M7)
+#
+[env:BTT_SKR_SE_BX]
+platform = ${common_stm32.platform}
+platform_packages = ${stm_flash_drive.platform_packages}
+extends = common_stm32
+board = BTT_SKR_SE_BX
+extra_scripts = ${common.extra_scripts}
+ pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+build_flags = ${common_stm32.build_flags}
+ ${stm_flash_drive.build_flags}
+ -DUSE_USBHOST_HS
+ -DUSE_USB_HS_IN_FS
+ #-DUSBD_USE_CDC_MSC
+ -DVECT_TAB_OFFSET=0x20000
+ -DHAL_DMA2D_MODULE_ENABLED
+ -DHAL_LTDC_MODULE_ENABLED
+ -DHAL_SDRAM_MODULE_ENABLED
+ -DHAL_QSPI_MODULE_ENABLED
+ -DHAL_MDMA_MODULE_ENABLED
+ -DHAL_SD_MODULE_ENABLED
+upload_protocol = cmsis-dap
+debug_tool = cmsis-dap