From b9327a4d161747218d4a7c8f621f248a58900e54 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 19 Nov 2017 14:12:45 -0600 Subject: [PATCH] Misc. general cleanup --- .../HAL/HAL_LPC1768/HAL_LCD_I2C_routines.c | 253 +++++++++--------- Marlin/src/HAL/HAL_LPC1768/arduino.cpp | 16 +- Marlin/src/HAL/HAL_LPC1768/pinmapping.h | 1 + Marlin/src/core/macros.h | 1 - Marlin/src/inc/Version.h | 4 +- 5 files changed, 130 insertions(+), 145 deletions(-) diff --git a/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_I2C_routines.c b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_I2C_routines.c index e43032b094..80bf5fc633 100644 --- a/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_I2C_routines.c +++ b/Marlin/src/HAL/HAL_LPC1768/HAL_LCD_I2C_routines.c @@ -23,161 +23,150 @@ // adapted from I2C/master/master.c example // https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html +#ifdef TARGET_LPC1768 +#ifdef __cplusplus + extern "C" { +#endif -#if defined(TARGET_LPC1768) +#include +#include +#include - #ifdef __cplusplus - extern "C" { - #endif +////////////////////////////////////////////////////////////////////////////////////// - #include - #include - #include +// These two routines are exact copies of the lpc17xx_i2c.c routines. Couldn't link to +// to the lpc17xx_i2c.c routines so had to copy them into this file & rename them. - ////////////////////////////////////////////////////////////////////////////////////// +static uint32_t _I2C_Start (LPC_I2C_TypeDef *I2Cx) { + // Reset STA, STO, SI + I2Cx->I2CONCLR = I2C_I2CONCLR_SIC|I2C_I2CONCLR_STOC|I2C_I2CONCLR_STAC; - // These two routines are exact copies of the lpc17xx_i2c.c routines. Couldn't link to - // to the lpc17xx_i2c.c routines so had to copy them into this file & rename them. + // Enter to Master Transmitter mode + I2Cx->I2CONSET = I2C_I2CONSET_STA; - static uint32_t _I2C_Start (LPC_I2C_TypeDef *I2Cx) - { - // Reset STA, STO, SI - I2Cx->I2CONCLR = I2C_I2CONCLR_SIC|I2C_I2CONCLR_STOC|I2C_I2CONCLR_STAC; + // Wait for complete + while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI)); + I2Cx->I2CONCLR = I2C_I2CONCLR_STAC; + return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK); +} - // Enter to Master Transmitter mode - I2Cx->I2CONSET = I2C_I2CONSET_STA; - - // Wait for complete - while (!(I2Cx->I2CONSET & I2C_I2CONSET_SI)); +static void _I2C_Stop (LPC_I2C_TypeDef *I2Cx) { + /* Make sure start bit is not active */ + if (I2Cx->I2CONSET & I2C_I2CONSET_STA) I2Cx->I2CONCLR = I2C_I2CONCLR_STAC; - return (I2Cx->I2STAT & I2C_STAT_CODE_BITMASK); - } - static void _I2C_Stop (LPC_I2C_TypeDef *I2Cx) - { + I2Cx->I2CONSET = I2C_I2CONSET_STO|I2C_I2CONSET_AA; + I2Cx->I2CONCLR = I2C_I2CONCLR_SIC; +} - /* Make sure start bit is not active */ - if (I2Cx->I2CONSET & I2C_I2CONSET_STA) - { - I2Cx->I2CONCLR = I2C_I2CONCLR_STAC; - } +////////////////////////////////////////////////////////////////////////////////////// - I2Cx->I2CONSET = I2C_I2CONSET_STO|I2C_I2CONSET_AA; +#define U8G_I2C_OPT_FAST 16 // from u8g.h - I2Cx->I2CONCLR = I2C_I2CONCLR_SIC; - } +#define USEDI2CDEV_M 1 +#define I2CDEV_S_ADDR 0x78 // from SSD1306 //actual address is 0x3C - shift left 1 with LSB set to 0 to indicate write - ////////////////////////////////////////////////////////////////////////////////////// +#define BUFFER_SIZE 0x1 // only do single byte transfers with LCDs - #define U8G_I2C_OPT_FAST 16 // from u8g.h +#if (USEDI2CDEV_M == 0) + #define I2CDEV_M LPC_I2C0 +#elif (USEDI2CDEV_M == 1) + #define I2CDEV_M LPC_I2C1 +#elif (USEDI2CDEV_M == 2) + #define I2CDEV_M LPC_I2C2 +#else + #error "Master I2C device not defined!" +#endif - #define USEDI2CDEV_M 1 +PINSEL_CFG_Type PinCfg; +I2C_M_SETUP_Type transferMCfg; - #define I2CDEV_S_ADDR 0x78 // from SSD1306 //actual address is 0x3C - shift left 1 with LSB set to 0 to indicate write +#define I2C_status (LPC_I2C1->I2STAT & I2C_STAT_CODE_BITMASK) - #define BUFFER_SIZE 0x1 // only do single byte transfers with LCDs +uint8_t u8g_i2c_start(uint8_t sla) { // send slave address and write bit + // Sometimes TX data ACK or NAK status is returned. That mean the start state didn't + // happen which means only the value of the slave address was send. Keep looping until + // the slave address and write bit are actually sent. + do{ + _I2C_Stop(I2CDEV_M); // output stop state on I2C bus + _I2C_Start(I2CDEV_M); // output start state on I2C bus + while ((I2C_status != I2C_I2STAT_M_TX_START) + && (I2C_status != I2C_I2STAT_M_TX_RESTART) + && (I2C_status != I2C_I2STAT_M_TX_DAT_ACK) + && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); //wait for start to be asserted - #if (USEDI2CDEV_M == 0) - #define I2CDEV_M LPC_I2C0 - #elif (USEDI2CDEV_M == 1) - #define I2CDEV_M LPC_I2C1 - #elif (USEDI2CDEV_M == 2) - #define I2CDEV_M LPC_I2C2 - #else - #error "Master I2C device not defined!" - #endif - - - PINSEL_CFG_Type PinCfg; - I2C_M_SETUP_Type transferMCfg; - - #define I2C_status (LPC_I2C1->I2STAT & I2C_STAT_CODE_BITMASK) - - - uint8_t u8g_i2c_start(uint8_t sla) { // send slave address and write bit - // Sometimes TX data ACK or NAK status is returned. That mean the start state didn't - // happen which means only the value of the slave address was send. Keep looping until - // the slave address and write bit are actually sent. - do{ - _I2C_Stop(I2CDEV_M); // output stop state on I2C bus - _I2C_Start(I2CDEV_M); // output start state on I2C bus - while ((I2C_status != I2C_I2STAT_M_TX_START) - && (I2C_status != I2C_I2STAT_M_TX_RESTART) - && (I2C_status != I2C_I2STAT_M_TX_DAT_ACK) - && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); //wait for start to be asserted - - LPC_I2C1->I2CONCLR = I2C_I2CONCLR_STAC; // clear start state before tansmitting slave address - LPC_I2C1->I2DAT = I2CDEV_S_ADDR & I2C_I2DAT_BITMASK; // transmit slave address & write bit - LPC_I2C1->I2CONSET = I2C_I2CONSET_AA; - LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC; - while ((I2C_status != I2C_I2STAT_M_TX_SLAW_ACK) - && (I2C_status != I2C_I2STAT_M_TX_SLAW_NACK) - && (I2C_status != I2C_I2STAT_M_TX_DAT_ACK) - && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); //wait for slaw to finish - }while ( (I2C_status == I2C_I2STAT_M_TX_DAT_ACK) || (I2C_status == I2C_I2STAT_M_TX_DAT_NACK)); - return 1; - } - - - void u8g_i2c_init(uint8_t clock_option) { - - /* - * Init I2C pin connect - */ - PinCfg.OpenDrain = 0; - PinCfg.Pinmode = 0; - #if ((USEDI2CDEV_M == 0)) - PinCfg.Funcnum = 1; - PinCfg.Pinnum = 27; - PinCfg.Portnum = 0; - PINSEL_ConfigPin(&PinCfg); // SDA0 / D57 AUX-1 - PinCfg.Pinnum = 28; - PINSEL_ConfigPin(&PinCfg); // SCL0 / D58 AUX-1 - #endif - #if ((USEDI2CDEV_M == 1)) - PinCfg.Funcnum = 3; - PinCfg.Pinnum = 0; - PinCfg.Portnum = 0; - PINSEL_ConfigPin(&PinCfg); // SDA1 / D20 SCA - PinCfg.Pinnum = 1; - PINSEL_ConfigPin(&PinCfg); // SCL1 / D21 SCL - #endif - #if ((USEDI2CDEV_M == 2)) - PinCfg.Funcnum = 2; - PinCfg.Pinnum = 10; - PinCfg.Portnum = 0; - PINSEL_ConfigPin(&PinCfg); // SDA2 / D38 X_ENABLE_PIN - PinCfg.Pinnum = 11; - PINSEL_ConfigPin(&PinCfg); // SCL2 / D55 X_DIR_PIN - #endif - // Initialize I2C peripheral - I2C_Init(I2CDEV_M, (clock_option & U8G_I2C_OPT_FAST) ? 400000: 100000); // LCD data rates - - /* Enable Master I2C operation */ - I2C_Cmd(I2CDEV_M, I2C_MASTER_MODE, ENABLE); - - u8g_i2c_start(0); // send slave address and write bit - } - - volatile extern uint32_t _millis; - uint8_t u8g_i2c_send_byte(uint8_t data) { - #define I2C_TIMEOUT 3 - LPC_I2C1->I2DAT = data & I2C_I2DAT_BITMASK; // transmit data + LPC_I2C1->I2CONCLR = I2C_I2CONCLR_STAC; // clear start state before tansmitting slave address + LPC_I2C1->I2DAT = I2CDEV_S_ADDR & I2C_I2DAT_BITMASK; // transmit slave address & write bit LPC_I2C1->I2CONSET = I2C_I2CONSET_AA; LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC; - uint32_t timeout = _millis + I2C_TIMEOUT; - while ((I2C_status != I2C_I2STAT_M_TX_DAT_ACK) && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK) && (timeout > _millis)); // wait for xmit to finish - // had hangs with SH1106 so added time out - have seen temporary screen corruption when this happens - return 1; - } + while ((I2C_status != I2C_I2STAT_M_TX_SLAW_ACK) + && (I2C_status != I2C_I2STAT_M_TX_SLAW_NACK) + && (I2C_status != I2C_I2STAT_M_TX_DAT_ACK) + && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK)); //wait for slaw to finish + }while ( (I2C_status == I2C_I2STAT_M_TX_DAT_ACK) || (I2C_status == I2C_I2STAT_M_TX_DAT_NACK)); + return 1; +} - void u8g_i2c_stop(void) { - } +void u8g_i2c_init(uint8_t clock_option) { - - #ifdef __cplusplus - } + /** + * Init I2C pin connect + */ + PinCfg.OpenDrain = 0; + PinCfg.Pinmode = 0; + #if ((USEDI2CDEV_M == 0)) + PinCfg.Funcnum = 1; + PinCfg.Pinnum = 27; + PinCfg.Portnum = 0; + PINSEL_ConfigPin(&PinCfg); // SDA0 / D57 AUX-1 + PinCfg.Pinnum = 28; + PINSEL_ConfigPin(&PinCfg); // SCL0 / D58 AUX-1 #endif + #if ((USEDI2CDEV_M == 1)) + PinCfg.Funcnum = 3; + PinCfg.Pinnum = 0; + PinCfg.Portnum = 0; + PINSEL_ConfigPin(&PinCfg); // SDA1 / D20 SCA + PinCfg.Pinnum = 1; + PINSEL_ConfigPin(&PinCfg); // SCL1 / D21 SCL + #endif + #if ((USEDI2CDEV_M == 2)) + PinCfg.Funcnum = 2; + PinCfg.Pinnum = 10; + PinCfg.Portnum = 0; + PINSEL_ConfigPin(&PinCfg); // SDA2 / D38 X_ENABLE_PIN + PinCfg.Pinnum = 11; + PINSEL_ConfigPin(&PinCfg); // SCL2 / D55 X_DIR_PIN + #endif + // Initialize I2C peripheral + I2C_Init(I2CDEV_M, (clock_option & U8G_I2C_OPT_FAST) ? 400000: 100000); // LCD data rates + + // Enable Master I2C operation + I2C_Cmd(I2CDEV_M, I2C_MASTER_MODE, ENABLE); + + u8g_i2c_start(0); // send slave address and write bit +} + +volatile extern uint32_t _millis; +uint8_t u8g_i2c_send_byte(uint8_t data) { + #define I2C_TIMEOUT 3 + LPC_I2C1->I2DAT = data & I2C_I2DAT_BITMASK; // transmit data + LPC_I2C1->I2CONSET = I2C_I2CONSET_AA; + LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC; + uint32_t timeout = _millis + I2C_TIMEOUT; + while ((I2C_status != I2C_I2STAT_M_TX_DAT_ACK) && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK) && (timeout > _millis)); // wait for xmit to finish + // had hangs with SH1106 so added time out - have seen temporary screen corruption when this happens + return 1; +} + +void u8g_i2c_stop(void) { +} + + +#ifdef __cplusplus + } #endif + +#endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/HAL_LPC1768/arduino.cpp b/Marlin/src/HAL/HAL_LPC1768/arduino.cpp index 794bbad248..4b31a54bd9 100644 --- a/Marlin/src/HAL/HAL_LPC1768/arduino.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/arduino.cpp @@ -72,8 +72,7 @@ extern "C" void delay(const int msec) { // IO functions // As defined by Arduino INPUT(0x0), OUPUT(0x1), INPUT_PULLUP(0x2) void pinMode(pin_t pin, uint8_t mode) { - if (!VALID_PIN(pin)) - return; + if (!VALID_PIN(pin)) return; PINSEL_CFG_Type config = { LPC1768_PIN_PORT(pin), LPC1768_PIN_PIN(pin), @@ -100,8 +99,7 @@ void pinMode(pin_t pin, uint8_t mode) { } void digitalWrite(pin_t pin, uint8_t pin_status) { - if (!VALID_PIN(pin)) - return; + if (!VALID_PIN(pin)) return; if (pin_status) LPC_GPIO(LPC1768_PIN_PORT(pin))->FIOSET = LPC_PIN(LPC1768_PIN_PIN(pin)); @@ -120,20 +118,18 @@ void digitalWrite(pin_t pin, uint8_t pin_status) { } bool digitalRead(pin_t pin) { - if (!VALID_PIN(pin)) { - return false; - } + if (!VALID_PIN(pin)) return false; + return LPC_GPIO(LPC1768_PIN_PORT(pin))->FIOPIN & LPC_PIN(LPC1768_PIN_PIN(pin)) ? 1 : 0; } void analogWrite(pin_t pin, int pwm_value) { // 1 - 254: pwm_value, 0: LOW, 255: HIGH + if (!VALID_PIN(pin)) return; + #define MR0_MARGIN 200 // if channel value too close to MR0 the system locks up static bool out_of_PWM_slots = false; - if (!VALID_PIN(pin)) - return; - uint value = MAX(MIN(pwm_value, 255), 0); if (value == 0 || value == 255) { // treat as digital pin LPC1768_PWM_detach_pin(pin); // turn off PWM diff --git a/Marlin/src/HAL/HAL_LPC1768/pinmapping.h b/Marlin/src/HAL/HAL_LPC1768/pinmapping.h index 4c7195ad55..c9ce96eefd 100644 --- a/Marlin/src/HAL/HAL_LPC1768/pinmapping.h +++ b/Marlin/src/HAL/HAL_LPC1768/pinmapping.h @@ -22,6 +22,7 @@ #ifndef __HAL_PINMAPPING_H__ #define __HAL_PINMAPPING_H__ + #include "../../core/macros.h" #include diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h index 1265ddbbc8..6342c16439 100644 --- a/Marlin/src/core/macros.h +++ b/Marlin/src/core/macros.h @@ -43,7 +43,6 @@ #define _O2 __attribute__((optimize("O2"))) #define _O3 __attribute__((optimize("O3"))) - // Clock speed factors #define CYCLES_PER_MICROSECOND (F_CPU / 1000000L) // 16 or 20 #define INT0_PRESCALER 8 diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h index 3731b476fe..6a08df0fb1 100644 --- a/Marlin/src/inc/Version.h +++ b/Marlin/src/inc/Version.h @@ -27,7 +27,7 @@ /** * This file is the standard Marlin version identifier file, all fields can be - * overriden by the ones defined on _Version.h by using the Configuration.h + * overriden by the ones defined in _Version.h by using the Configuration.h * directive USE_AUTOMATIC_VERSIONING. */ @@ -53,7 +53,7 @@ * here we define this default string as the date where the latest release * version was tagged. */ - #define STRING_DISTRIBUTION_DATE "2017-10-19 12:00" + #define STRING_DISTRIBUTION_DATE "2017-11-19 12:00" /** * Required minimum Configuration.h and Configuration_adv.h file versions.