From 6854f44bf2d880d0930ac6e68bbff0f80266ddbc Mon Sep 17 00:00:00 2001
From: esenapaj <creation0004@gmail.com>
Date: Fri, 16 Dec 2016 07:04:03 +0900
Subject: [PATCH] Add description for choice of DEFAULT_DUAL_X_CARRIAGE_MODE

---
 Marlin/Configuration_adv.h                         | 14 +++++++-------
 .../Cartesio/Configuration_adv.h                   | 14 +++++++-------
 .../Felix/Configuration_adv.h                      | 14 +++++++-------
 .../Hephestos/Configuration_adv.h                  | 14 +++++++-------
 .../Hephestos_2/Configuration_adv.h                | 14 +++++++-------
 .../K8200/Configuration_adv.h                      | 14 +++++++-------
 .../K8400/Configuration_adv.h                      | 14 +++++++-------
 .../RigidBot/Configuration_adv.h                   | 14 +++++++-------
 .../SCARA/Configuration_adv.h                      | 14 +++++++-------
 .../TAZ4/Configuration_adv.h                       | 14 +++++++-------
 .../WITBOX/Configuration_adv.h                     | 14 +++++++-------
 .../delta/biv2.5/Configuration_adv.h               | 14 +++++++-------
 .../delta/generic/Configuration_adv.h              | 14 +++++++-------
 .../delta/kossel_mini/Configuration_adv.h          | 14 +++++++-------
 .../delta/kossel_pro/Configuration_adv.h           | 14 +++++++-------
 .../delta/kossel_xl/Configuration_adv.h            | 14 +++++++-------
 .../makibox/Configuration_adv.h                    | 14 +++++++-------
 .../tvrrug/Round2/Configuration_adv.h              | 14 +++++++-------
 18 files changed, 126 insertions(+), 126 deletions(-)

diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 3138a13ba8..943cec5ee9 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h
index 5f54f0e758..aa8abaf73c 100644
--- a/Marlin/example_configurations/Cartesio/Configuration_adv.h
+++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h
index 2e52c39eb9..1a43a932ff 100644
--- a/Marlin/example_configurations/Felix/Configuration_adv.h
+++ b/Marlin/example_configurations/Felix/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h
index 9740e9c754..7093cc0355 100644
--- a/Marlin/example_configurations/Hephestos/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
index a7fab871b9..dc7bc1d0b9 100644
--- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
+++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h
index c275fa3b68..925395f846 100644
--- a/Marlin/example_configurations/K8200/Configuration_adv.h
+++ b/Marlin/example_configurations/K8200/Configuration_adv.h
@@ -321,13 +321,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/K8400/Configuration_adv.h b/Marlin/example_configurations/K8400/Configuration_adv.h
index 8ee66df5e8..d1c348fa38 100644
--- a/Marlin/example_configurations/K8400/Configuration_adv.h
+++ b/Marlin/example_configurations/K8400/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h
index 92a337ba1a..2a9cb42b59 100644
--- a/Marlin/example_configurations/RigidBot/Configuration_adv.h
+++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h
index 647fb71224..54ed0410d1 100644
--- a/Marlin/example_configurations/SCARA/Configuration_adv.h
+++ b/Marlin/example_configurations/SCARA/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h
index 0211a9caff..85e5b27793 100644
--- a/Marlin/example_configurations/TAZ4/Configuration_adv.h
+++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h
@@ -316,13 +316,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h
index 9740e9c754..7093cc0355 100644
--- a/Marlin/example_configurations/WITBOX/Configuration_adv.h
+++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
index 114951d57b..0b0e71333b 100644
--- a/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/biv2.5/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h
index b3a2039e52..d2adb4cfa6 100644
--- a/Marlin/example_configurations/delta/generic/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
index b3a2039e52..d2adb4cfa6 100644
--- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
index b438af2894..a025d5a161 100644
--- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h
@@ -313,13 +313,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
index a98c53eaec..96d2f05be3 100644
--- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h
index 1f5446dc5f..1c3dc6f5bf 100644
--- a/Marlin/example_configurations/makibox/Configuration_adv.h
+++ b/Marlin/example_configurations/makibox/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
index 190c18ce3b..1ae59aed04 100644
--- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h
@@ -308,13 +308,13 @@
       // Remember: you should set the second extruder x-offset to 0 in your slicer.
 
   // There are a few selectable movement modes for dual x-carriages using M605 S<mode>
-  //    Mode 0: Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
-  //                           as long as it supports dual x-carriages. (M605 S0)
-  //    Mode 1: Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
-  //                           that additional slicer support is not required. (M605 S1)
-  //    Mode 2: Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
-  //                           actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
-  //                           once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+  //    Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+  //                                    as long as it supports dual x-carriages. (M605 S0)
+  //    Mode 1 (DXC_AUTO_PARK_MODE)   : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+  //                                    that additional slicer support is not required. (M605 S1)
+  //    Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+  //                                    actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+  //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE