diff --git a/.travis.yml b/.travis.yml index 00d72b99bc..0f02842159 100644 --- a/.travis.yml +++ b/.travis.yml @@ -63,7 +63,7 @@ script: - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS - opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED - opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE - - opt_enable_adv FWRETRACT MAX7219_DEBUG + - opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU - opt_set ABL_GRID_POINTS_X 16 - opt_set ABL_GRID_POINTS_Y 16 - opt_set_adv FANMUX0_PIN 53 diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index fbbb21d416..af44bb6c99 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp index bc99eb3aa9..3513fe7e75 100644 --- a/Marlin/src/Marlin.cpp +++ b/Marlin/src/Marlin.cpp @@ -775,8 +775,8 @@ void setup() { OUT_WRITE(STAT_LED_BLUE_PIN, LOW); // turn it off #endif - #if ENABLED(NEOPIXEL_LED) - setup_neopixel(); + #if HAS_COLOR_LEDS + leds.setup(); #endif #if ENABLED(RGB_LED) || ENABLED(RGBW_LED) diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h index fbbb21d416..af44bb6c99 100644 --- a/Marlin/src/config/default/Configuration_adv.h +++ b/Marlin/src/config/default/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h index aaef371f2c..aab17d8ff7 100644 --- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h index ff9a8b40d0..c99ff058da 100644 --- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h index 2034846532..0c256cdd5f 100644 --- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h +++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h index f6a9abbce9..b3530082ea 100644 --- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h +++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h @@ -483,6 +483,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h index 007652f865..1f75c0d681 100644 --- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h index f5adb37180..749ccbdd02 100644 --- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h index 007652f865..1f75c0d681 100644 --- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h index 82e4ff63dd..1e061e2beb 100644 --- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h +++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h index fe5add0c67..386a908d01 100644 --- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h +++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h index 17719cee01..4944d40a58 100644 --- a/Marlin/src/config/examples/Felix/Configuration_adv.h +++ b/Marlin/src/config/examples/Felix/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h index baa7a278fb..707c2f36cc 100644 --- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h index 21519c30b4..f5c1659b0d 100644 --- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h index c3b0b911a8..91da6a5621 100644 --- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h +++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h index c8f092df2e..6143c43815 100644 --- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h index caa6590385..ce574a38f8 100644 --- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h +++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h @@ -483,6 +483,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h index 4ff47fd90a..bc5558adcf 100644 --- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h +++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h index b0756f7912..87f44b6973 100644 --- a/Marlin/src/config/examples/SCARA/Configuration_adv.h +++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h index d6da256f98..c07caf1706 100644 --- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h +++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h @@ -471,6 +471,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h index 22c845e359..fdc6d55ab2 100644 --- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h +++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h index d9aef183d9..4efb6c2dd7 100644 --- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h index 98959a683f..b1040f389f 100644 --- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h @@ -495,6 +495,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h index 3ab9051631..d96e2add83 100644 --- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h +++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h @@ -483,6 +483,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 4850ad7a94..26681fe299 100644 --- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -484,6 +484,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 8663f5e32b..05a32b8e48 100644 --- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -484,6 +484,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h index 8663f5e32b..05a32b8e48 100644 --- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h @@ -484,6 +484,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h index 8663f5e32b..05a32b8e48 100644 --- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h @@ -484,6 +484,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h index 46c4999cca..ba46688d23 100644 --- a/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h @@ -489,6 +489,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h index 66dd6700f4..1db1d39bc1 100644 --- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h @@ -484,6 +484,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h index 59b861ed4d..c493169105 100644 --- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h index 3bc38c7459..1e82117403 100644 --- a/Marlin/src/config/examples/makibox/Configuration_adv.h +++ b/Marlin/src/config/examples/makibox/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h index c1e303af39..ccbebbaa8d 100644 --- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h @@ -482,6 +482,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h index ad2f3b894f..056c79ca98 100644 --- a/Marlin/src/config/examples/wt150/Configuration_adv.h +++ b/Marlin/src/config/examples/wt150/Configuration_adv.h @@ -483,6 +483,23 @@ // The timeout (in ms) to return to the status screen from sub-menus //#define LCD_TIMEOUT_TO_STATUS 15000 +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + #if ENABLED(SDSUPPORT) // Some RAMPS and other boards don't detect when an SD card is inserted. You can work diff --git a/Marlin/src/feature/leds/blinkm.cpp b/Marlin/src/feature/leds/blinkm.cpp index 30a465c672..ff5bb71a95 100644 --- a/Marlin/src/feature/leds/blinkm.cpp +++ b/Marlin/src/feature/leds/blinkm.cpp @@ -21,8 +21,7 @@ */ /** - * blinkm.cpp - Library for controlling a BlinkM over i2c - * Created by Tim Koster, August 21 2013. + * blinkm.cpp - Control a BlinkM over i2c */ #include "../../inc/MarlinConfig.h" @@ -30,17 +29,18 @@ #if ENABLED(BLINKM) #include "blinkm.h" +#include "leds.h" +#include -void blinkm_set_led_color(const byte r, const byte g, const byte b) { +void blinkm_set_led_color(const LEDColor &color) { Wire.begin(); Wire.beginTransmission(0x09); Wire.write('o'); //to disable ongoing script, only needs to be used once Wire.write('n'); - Wire.write(r); - Wire.write(g); - Wire.write(b); + Wire.write(color.r); + Wire.write(color.g); + Wire.write(color.b); Wire.endTransmission(); } #endif // BLINKM - diff --git a/Marlin/src/feature/leds/blinkm.h b/Marlin/src/feature/leds/blinkm.h index d4b5b8d2e7..20e84d9a95 100644 --- a/Marlin/src/feature/leds/blinkm.h +++ b/Marlin/src/feature/leds/blinkm.h @@ -21,16 +21,15 @@ */ /** - * blinkm.h - Library for controlling a BlinkM over i2c - * Created by Tim Koster, August 21 2013. + * blinkm.h - Control a BlinkM over i2c */ -#ifndef __BLINKM_H__ -#define __BLINKM_H__ +#ifndef _BLINKM_H_ +#define _BLINKM_H_ -#include -#include +struct LEDColor; +typedef LEDColor LEDColor; -void blinkm_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b); +void blinkm_set_led_color(const LEDColor &color); -#endif // __BLINKM_H__ +#endif // _BLINKM_H_ diff --git a/Marlin/src/feature/leds/leds.cpp b/Marlin/src/feature/leds/leds.cpp index b412bdc70c..d3175a0314 100644 --- a/Marlin/src/feature/leds/leds.cpp +++ b/Marlin/src/feature/leds/leds.cpp @@ -21,7 +21,7 @@ */ /** - * Marlin RGB LED general support + * leds.cpp - Marlin RGB LED general support */ #include "../../inc/MarlinConfig.h" @@ -30,27 +30,56 @@ #include "leds.h" -void set_led_color( - const uint8_t r, const uint8_t g, const uint8_t b - #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED) - , const uint8_t w // = 0 - #if ENABLED(NEOPIXEL_LED) - , const uint8_t p // = NEOPIXEL_BRIGHTNESS - , const bool isSequence // = false - #endif - #endif +#if ENABLED(BLINKM) + #include "blinkm.h" +#endif + +#if ENABLED(PCA9632) + #include "pca9632.h" +#endif + +#if ENABLED(LED_COLOR_PRESETS) + const LEDColor LEDLights::defaultLEDColor = MakeLEDColor( + LED_USER_PRESET_RED, + LED_USER_PRESET_GREEN, + LED_USER_PRESET_BLUE, + LED_USER_PRESET_WHITE, + LED_USER_PRESET_BRIGHTNESS + ); +#endif + +#if ENABLED(LED_CONTROL_MENU) + LEDColor LEDLights::color; + bool LEDLights::lights_on; +#endif + +LEDLights leds; + +void LEDLights::setup() { + #if ENABLED(NEOPIXEL_LED) + setup_neopixel(); + #endif + #if ENABLED(LED_USER_PRESET_STARTUP) + set_default(); + #endif +} + +void LEDLights::set_color(const LEDColor &incol + #if ENABLED(NEOPIXEL_LED) + , bool isSequence/*=false*/ + #endif ) { #if ENABLED(NEOPIXEL_LED) - const uint32_t color = pixels.Color(r, g, b, w); + const uint32_t neocolor = pixels.Color(incol.r, incol.g, incol.b, incol.w); static uint16_t nextLed = 0; - pixels.setBrightness(p); + pixels.setBrightness(incol.i); if (!isSequence) - set_neopixel_color(color); + set_neopixel_color(neocolor); else { - pixels.setPixelColor(nextLed, color); + pixels.setPixelColor(nextLed, neocolor); pixels.show(); if (++nextLed >= pixels.numPixels()) nextLed = 0; return; @@ -59,28 +88,53 @@ void set_led_color( #endif #if ENABLED(BLINKM) - blinkm_set_led_color(r, g, b); // Use i2c to send the RGB components to the device. + + // This variant uses i2c to send the RGB components to the device. + blinkm_set_led_color(incol); + #endif #if ENABLED(RGB_LED) || ENABLED(RGBW_LED) - // This variant uses 3 separate pins for the RGB components. + + // This variant uses 3-4 separate pins for the RGB(W) components. // If the pins can do PWM then their intensity will be set. - WRITE(RGB_LED_R_PIN, r ? HIGH : LOW); - WRITE(RGB_LED_G_PIN, g ? HIGH : LOW); - WRITE(RGB_LED_B_PIN, b ? HIGH : LOW); - analogWrite(RGB_LED_R_PIN, r); - analogWrite(RGB_LED_G_PIN, g); - analogWrite(RGB_LED_B_PIN, b); + WRITE(RGB_LED_R_PIN, incol.r ? HIGH : LOW); + WRITE(RGB_LED_G_PIN, incol.g ? HIGH : LOW); + WRITE(RGB_LED_B_PIN, incol.b ? HIGH : LOW); + analogWrite(RGB_LED_R_PIN, incol.r); + analogWrite(RGB_LED_G_PIN, incol.g); + analogWrite(RGB_LED_B_PIN, incol.b); #if ENABLED(RGBW_LED) - WRITE(RGB_LED_W_PIN, w ? HIGH : LOW); - analogWrite(RGB_LED_W_PIN, w); + WRITE(RGB_LED_W_PIN, incol.w ? HIGH : LOW); + analogWrite(RGB_LED_W_PIN, incol.w); #endif + #endif #if ENABLED(PCA9632) - pca9632_set_led_color(r, g, b); // Update I2C LED driver + // Update I2C LED driver + pca9632_set_led_color(incol); + #endif + + #if ENABLED(LED_CONTROL_MENU) + // Don't update the color when OFF + lights_on = !incol.is_off(); + if (lights_on) color = incol; #endif } +void LEDLights::set_white() { + #if ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(BLINKM) || ENABLED(PCA9632) + set_color(LEDColorWhite()); + #endif + #if ENABLED(NEOPIXEL_LED) + set_neopixel_color(pixels.Color(NEO_WHITE)); + #endif +} + +#if ENABLED(LED_CONTROL_MENU) + void LEDLights::toggle() { if (lights_on) set_off(); else update(); } +#endif + #endif // HAS_COLOR_LEDS diff --git a/Marlin/src/feature/leds/leds.h b/Marlin/src/feature/leds/leds.h index 81c822666a..f5194a260f 100644 --- a/Marlin/src/feature/leds/leds.h +++ b/Marlin/src/feature/leds/leds.h @@ -21,7 +21,7 @@ */ /** - * Marlin general RGB LED support + * leds.h - Marlin general RGB LED support */ #ifndef __LEDS_H__ @@ -30,39 +30,140 @@ #include "../../inc/MarlinConfig.h" #if ENABLED(NEOPIXEL_LED) - #include #include "neopixel.h" #endif -#if ENABLED(BLINKM) - #include "blinkm.h" -#endif +#define HAS_WHITE_LED (ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED)) -#if ENABLED(PCA9632) - #include "pca9632.h" -#endif - -#if ENABLED(RGB_LED) || ENABLED(BLINKM) || ENABLED(PCA9632) - #define LED_WHITE 255, 255, 255 -#elif ENABLED(RGBW_LED) - #define LED_WHITE 0, 0, 0, 255 -#endif - -#if ENABLED(NEOPIXEL_LED) - #define LED_BRIGHTNESS pixels.getBrightness() -#else - #define LED_BRIGHTNESS 255 -#endif - -void set_led_color( - const uint8_t r, const uint8_t g, const uint8_t b - #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED) - , const uint8_t w = 0 +/** + * LEDcolor type for use with leds.set_color + */ +typedef struct LEDColor { + uint8_t r, g, b + #if HAS_WHITE_LED + , w #if ENABLED(NEOPIXEL_LED) - , const uint8_t p = NEOPIXEL_BRIGHTNESS - , const bool isSequence = false + , i #endif #endif -); + ; + LEDColor() : r(255), g(255), b(255) + #if HAS_WHITE_LED + , w(255) + #if ENABLED(NEOPIXEL_LED) + , i(NEOPIXEL_BRIGHTNESS) + #endif + #endif + {} + LEDColor(uint8_t r, uint8_t g, uint8_t b + #if HAS_WHITE_LED + , uint8_t w=0 + #if ENABLED(NEOPIXEL_LED) + , uint8_t i=NEOPIXEL_BRIGHTNESS + #endif + #endif + ) : r(r), g(g), b(b) + #if HAS_WHITE_LED + , w(w) + #if ENABLED(NEOPIXEL_LED) + , i(i) + #endif + #endif + {} + LEDColor& operator=(const LEDColor &right) { + if (this != &right) memcpy(this, &right, sizeof(LEDColor)); + return *this; + } + bool operator==(const LEDColor &right) { + if (this == &right) return true; + return 0 == memcmp(this, &right, sizeof(LEDColor)); + } + bool operator!=(const LEDColor &right) { return !operator==(right); } + bool is_off() const { + return 3 > r + g + b + #if HAS_WHITE_LED + + w + #endif + ; + } +} LEDColor; + +/** + * Color helpers and presets + */ +#if HAS_WHITE_LED + #define LEDColorWhite() LEDColor(0, 0, 0, 255) + #if ENABLED(NEOPIXEL_LED) + #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W, I) + #else + #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W) + #endif +#else + #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B) + #define LEDColorWhite() LEDColor(255, 255, 255) +#endif +#define LEDColorOff() LEDColor( 0, 0, 0) +#define LEDColorRed() LEDColor(255, 0, 0) +#define LEDColorOrange() LEDColor(255, 80, 0) +#define LEDColorYellow() LEDColor(255, 255, 0) +#define LEDColorGreen() LEDColor( 0, 255, 0) +#define LEDColorBlue() LEDColor( 0, 0, 255) +#define LEDColorIndigo() LEDColor( 0, 255, 255) +#define LEDColorViolet() LEDColor(255, 0, 255) + +class LEDLights { +public: + LEDLights() {} // ctor + + static void setup(); // init() + + static void set_color(const LEDColor &color + #if ENABLED(NEOPIXEL_LED) + , bool isSequence=false + #endif + ); + + FORCE_INLINE void set_color(uint8_t r, uint8_t g, uint8_t b + #if HAS_WHITE_LED + , uint8_t w=0 + #if ENABLED(NEOPIXEL_LED) + , uint8_t i=NEOPIXEL_BRIGHTNESS + #endif + #endif + #if ENABLED(NEOPIXEL_LED) + , bool isSequence=false + #endif + ) { + set_color(MakeLEDColor(r, g, b, w, i) + #if ENABLED(NEOPIXEL_LED) + , isSequence + #endif + ); + } + + static void set_white(); + FORCE_INLINE static void set_off() { set_color(LEDColorOff()); } + FORCE_INLINE static void set_green() { set_color(LEDColorGreen()); } + + #if ENABLED(LED_COLOR_PRESETS) + static const LEDColor defaultLEDColor; + FORCE_INLINE static void set_default() { set_color(defaultLEDColor); } + FORCE_INLINE static void set_red() { set_color(LEDColorRed()); } + FORCE_INLINE static void set_orange() { set_color(LEDColorOrange()); } + FORCE_INLINE static void set_yellow() { set_color(LEDColorYellow()); } + FORCE_INLINE static void set_blue() { set_color(LEDColorBlue()); } + FORCE_INLINE static void set_indigo() { set_color(LEDColorIndigo()); } + FORCE_INLINE static void set_violet() { set_color(LEDColorViolet()); } + #endif + + #if ENABLED(LED_CONTROL_MENU) + static LEDColor color; // last non-off color + static bool lights_on; // the last set color was "on" + static void toggle(); // swap "off" with color + FORCE_INLINE static void update() { set_color(color); } + #endif +}; + +extern LEDLights leds; #endif // __LEDS_H__ diff --git a/Marlin/src/feature/leds/neopixel.cpp b/Marlin/src/feature/leds/neopixel.cpp index ae06e9b009..d3e292d705 100644 --- a/Marlin/src/feature/leds/neopixel.cpp +++ b/Marlin/src/feature/leds/neopixel.cpp @@ -53,7 +53,29 @@ void setup_neopixel() { set_neopixel_color(pixels.Color(0, 0, 255, 0)); // blue safe_delay(1000); #endif - set_neopixel_color(pixels.Color(NEO_WHITE)); // white + + #if ENABLED(LED_USER_PRESET_STARTUP) + set_neopixel_color(pixels.Color(LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE, LED_USER_PRESET_WHITE)); + #else + set_neopixel_color(pixels.Color(0, 0, 0, 0)); + #endif } +#if 0 +bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p) { + const uint32_t color = pixels.Color(r, g, b, w); + pixels.setBrightness(p); + #if !ENABLED(NEOPIXEL_IS_SEQUENTIAL) + set_neopixel_color(color); + return false; + #else + static uint16_t nextLed = 0; + pixels.setPixelColor(nextLed, color); + pixels.show(); + if (++nextLed >= pixels.numPixels()) nextLed = 0; + return true; + #endif +} +#endif + #endif // NEOPIXEL_LED diff --git a/Marlin/src/feature/leds/neopixel.h b/Marlin/src/feature/leds/neopixel.h index 2b937f1b87..9f24b0287a 100644 --- a/Marlin/src/feature/leds/neopixel.h +++ b/Marlin/src/feature/leds/neopixel.h @@ -36,13 +36,14 @@ #define NEOPIXEL_IS_RGBW !NEOPIXEL_IS_RGB #if NEOPIXEL_IS_RGB - #define NEO_WHITE 255, 255, 255 + #define NEO_WHITE 255, 255, 255, 0 #else #define NEO_WHITE 0, 0, 0, 255 #endif void setup_neopixel(); void set_neopixel_color(const uint32_t color); +//bool neopixel_set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p); extern Adafruit_NeoPixel pixels; diff --git a/Marlin/src/feature/leds/pca9632.cpp b/Marlin/src/feature/leds/pca9632.cpp index e7bc46cb2e..a95a48190a 100644 --- a/Marlin/src/feature/leds/pca9632.cpp +++ b/Marlin/src/feature/leds/pca9632.cpp @@ -30,6 +30,8 @@ #if ENABLED(PCA9632) #include "pca9632.h" +#include "leds.h" +#include #define PCA9632_MODE1_VALUE 0b00000001 //(ALLCALL) #define PCA9632_MODE2_VALUE 0b00010101 //(DIMMING, INVERT, CHANGE ON STOP,TOTEM) @@ -97,7 +99,7 @@ static void PCA9632_WriteAllRegisters(const byte addr, const byte regadd, const } #endif -void pca9632_set_led_color(const byte r, const byte g, const byte b) { +void pca9632_set_led_color(const LEDColor &color) { if (!PCA_init) { PCA_init = 1; Wire.begin(); @@ -105,11 +107,11 @@ void pca9632_set_led_color(const byte r, const byte g, const byte b) { PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_MODE2, PCA9632_MODE2_VALUE); } - const byte LEDOUT = (r ? LED_PWM << PCA9632_RED : 0) - | (g ? LED_PWM << PCA9632_GRN : 0) - | (b ? LED_PWM << PCA9632_BLU : 0); + const byte LEDOUT = (color.r ? LED_PWM << PCA9632_RED : 0) + | (color.g ? LED_PWM << PCA9632_GRN : 0) + | (color.b ? LED_PWM << PCA9632_BLU : 0); - PCA9632_WriteAllRegisters(PCA9632_ADDRESS,PCA9632_PWM0, r, g, b); + PCA9632_WriteAllRegisters(PCA9632_ADDRESS,PCA9632_PWM0, color.r, color.g, color.b); PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_LEDOUT, LEDOUT); } diff --git a/Marlin/src/feature/leds/pca9632.h b/Marlin/src/feature/leds/pca9632.h index 0a8b48d3c1..4d98267beb 100644 --- a/Marlin/src/feature/leds/pca9632.h +++ b/Marlin/src/feature/leds/pca9632.h @@ -20,7 +20,7 @@ * */ -/* +/** * Driver for the Philips PCA9632 LED driver. * Written by Robert Mendon Feb 2017. */ @@ -28,9 +28,9 @@ #ifndef __PCA9632_H__ #define __PCA9632_H__ -#include -#include +struct LEDColor; +typedef LEDColor LEDColor; -void pca9632_set_led_color(const byte r, const byte g, const byte b); +void pca9632_set_led_color(const LEDColor &color); #endif // __PCA9632_H__ diff --git a/Marlin/src/gcode/feature/leds/M150.cpp b/Marlin/src/gcode/feature/leds/M150.cpp index f5ea2113f7..7eb8eb70de 100644 --- a/Marlin/src/gcode/feature/leds/M150.cpp +++ b/Marlin/src/gcode/feature/leds/M150.cpp @@ -45,17 +45,13 @@ * M150 P ; Set LED full brightness */ void GcodeSuite::M150() { - set_led_color( + leds.set_color(MakeLEDColor( parser.seen('R') ? (parser.has_value() ? parser.value_byte() : 255) : 0, parser.seen('U') ? (parser.has_value() ? parser.value_byte() : 255) : 0, - parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0 - #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED) - , parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0 - #if ENABLED(NEOPIXEL_LED) - , parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : pixels.getBrightness() - #endif - #endif - ); + parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0, + parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0, + parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : pixels.getBrightness() + )); } #endif // HAS_COLOR_LEDS diff --git a/Marlin/src/gcode/queue.cpp b/Marlin/src/gcode/queue.cpp index 54614bc25e..9f404f9473 100644 --- a/Marlin/src/gcode/queue.cpp +++ b/Marlin/src/gcode/queue.cpp @@ -370,13 +370,13 @@ inline void get_serial_commands() { SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED); #if ENABLED(PRINTER_EVENT_LEDS) LCD_MESSAGEPGM(MSG_INFO_COMPLETED_PRINTS); - set_led_color(0, 255, 0); // Green + leds.set_green(); #if HAS_RESUME_CONTINUE enqueue_and_echo_commands_P(PSTR("M0")); // end of the queue! #else safe_delay(1000); #endif - set_led_color(0, 0, 0); // OFF + leds.set_off(); #endif card.checkautostart(true); } diff --git a/Marlin/src/gcode/temperature/M104_M109.cpp b/Marlin/src/gcode/temperature/M104_M109.cpp index afc7cda7a7..9dfaacb56f 100644 --- a/Marlin/src/gcode/temperature/M104_M109.cpp +++ b/Marlin/src/gcode/temperature/M104_M109.cpp @@ -190,12 +190,10 @@ void GcodeSuite::M109() { const uint8_t blue = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 255, 0); if (blue != old_blue) { old_blue = blue; - set_led_color(255, 0, blue - #if ENABLED(NEOPIXEL_LED) - , 0, pixels.getBrightness() - #if ENABLED(NEOPIXEL_IS_SEQUENTIAL) - , true - #endif + leds.set_color( + MakeLEDColor(255, 0, blue, 0, pixels.getBrightness()) + #if ENABLED(NEOPIXEL_IS_SEQUENTIAL) + , true #endif ); } @@ -233,12 +231,7 @@ void GcodeSuite::M109() { if (wait_for_heatup) { LCD_MESSAGEPGM(MSG_HEATING_COMPLETE); #if ENABLED(PRINTER_EVENT_LEDS) - #if ENABLED(RGB_LED) || ENABLED(BLINKM) || ENABLED(PCA9632) || ENABLED(RGBW_LED) - set_led_color(LED_WHITE); - #endif - #if ENABLED(NEOPIXEL_LED) - set_neopixel_color(pixels.Color(NEO_WHITE)); - #endif + leds.set_white(); #endif } diff --git a/Marlin/src/gcode/temperature/M140_M190.cpp b/Marlin/src/gcode/temperature/M140_M190.cpp index b72f3b7a9e..009e3629a8 100644 --- a/Marlin/src/gcode/temperature/M140_M190.cpp +++ b/Marlin/src/gcode/temperature/M140_M190.cpp @@ -132,12 +132,10 @@ void GcodeSuite::M190() { const uint8_t red = map(constrain(temp, start_temp, target_temp), start_temp, target_temp, 0, 255); if (red != old_red) { old_red = red; - set_led_color(red, 0, 255 - #if ENABLED(NEOPIXEL_LED) - , 0, pixels.getBrightness() - #if ENABLED(NEOPIXEL_IS_SEQUENTIAL) - , true - #endif + leds.set_color( + MakeLEDColor(red, 0, 255, 0, pixels.getBrightness()) + #if ENABLED(NEOPIXEL_IS_SEQUENTIAL) + , true #endif ); } diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 95a8b6ba9b..cf128a989f 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -1178,6 +1178,29 @@ #define MAX_VFAT_ENTRIES (2) #endif +// Set defaults for unspecified LED user colors +#if ENABLED(LED_CONTROL_MENU) + #ifndef LED_USER_PRESET_RED + #define LED_USER_PRESET_RED 255 + #endif + #ifndef LED_USER_PRESET_GREEN + #define LED_USER_PRESET_GREEN 255 + #endif + #ifndef LED_USER_PRESET_BLUE + #define LED_USER_PRESET_BLUE 255 + #endif + #ifndef LED_USER_PRESET_WHITE + #define LED_USER_PRESET_WHITE 0 + #endif + #ifndef LED_USER_PRESET_BRIGHTNESS + #ifdef NEOPIXEL_BRIGHTNESS + #define LED_USER_PRESET_BRIGHTNESS NEOPIXEL_BRIGHTNESS + #else + #define LED_USER_PRESET_BRIGHTNESS 255 + #endif + #endif +#endif + // Force SDCARD_SORT_ALPHA to be enabled for Graphical LCD on LPC1768 // because of a bug in the shared SPI implementation. (See #8122) #if defined(TARGET_LPC1768) && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) diff --git a/Marlin/src/inc/MarlinConfig.h b/Marlin/src/inc/MarlinConfig.h index ac47b0962d..1e4a96e514 100644 --- a/Marlin/src/inc/MarlinConfig.h +++ b/Marlin/src/inc/MarlinConfig.h @@ -32,6 +32,7 @@ #endif #include "Conditionals_post.h" #include "SanityCheck.h" +#include "../HAL/HAL_SanityCheck.h" // Include all core headers #include "../core/enum.h" diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index f2ba984e28..ab1ccd20cd 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -1479,6 +1479,8 @@ static_assert(COUNT(sanity_arr_3) <= XYZE_N, "DEFAULT_MAX_ACCELERATION has too m #error "BLOCK_BUFFER_SIZE must be a power of 2." #endif -#include "../HAL/HAL_SanityCheck.h" // get CPU specific checks +#if ENABLED(LED_CONTROL_MENU) && DISABLED(ULTIPANEL) + #error "LED_CONTROL_MENU requires an LCD controller." +#endif #endif // _SANITYCHECK_H_ diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 580d1cb379..f27a3568e6 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -174,7 +174,6 @@ #ifndef MSG_USER_MENU #define MSG_USER_MENU _UxGT("Custom Commands") #endif - #ifndef MSG_UBL_DOING_G29 #define MSG_UBL_DOING_G29 _UxGT("Doing G29") #endif @@ -362,6 +361,64 @@ #define MSG_UBL_STEP_BY_STEP_MENU _UxGT("Step-By-Step UBL") #endif +#ifndef MSG_LED_CONTROL + #define MSG_LED_CONTROL _UxGT("LED Control") +#endif +#ifndef MSG_LEDS_ON + #define MSG_LEDS_ON _UxGT("Lights On") +#endif +#ifndef MSG_LEDS_OFF + #define MSG_LEDS_OFF _UxGT("Lights Off") +#endif +#ifndef MSG_LED_PRESETS + #define MSG_LED_PRESETS _UxGT("Light Presets") +#endif +#ifndef MSG_SET_LEDS_RED + #define MSG_SET_LEDS_RED _UxGT("Red") +#endif +#ifndef MSG_SET_LEDS_ORANGE + #define MSG_SET_LEDS_ORANGE _UxGT("Orange") +#endif +#ifndef MSG_SET_LEDS_YELLOW + #define MSG_SET_LEDS_YELLOW _UxGT("Yellow") +#endif +#ifndef MSG_SET_LEDS_GREEN + #define MSG_SET_LEDS_GREEN _UxGT("Green") +#endif +#ifndef MSG_SET_LEDS_BLUE + #define MSG_SET_LEDS_BLUE _UxGT("Blue") +#endif +#ifndef MSG_SET_LEDS_INDIGO + #define MSG_SET_LEDS_INDIGO _UxGT("Indigo") +#endif +#ifndef MSG_SET_LEDS_VIOLET + #define MSG_SET_LEDS_VIOLET _UxGT("Violet") +#endif +#ifndef MSG_SET_LEDS_WHITE + #define MSG_SET_LEDS_WHITE _UxGT("White") +#endif +#ifndef MSG_SET_LEDS_DEFAULT + #define MSG_SET_LEDS_DEFAULT _UxGT("Default") +#endif +#ifndef MSG_CUSTOM_LEDS + #define MSG_CUSTOM_LEDS _UxGT("Custom Lights") +#endif +#ifndef MSG_INTENSITY_R + #define MSG_INTENSITY_R _UxGT("Red Intensity") +#endif +#ifndef MSG_INTENSITY_G + #define MSG_INTENSITY_G _UxGT("Green Intensity") +#endif +#ifndef MSG_INTENSITY_B + #define MSG_INTENSITY_B _UxGT("Blue Intensity") +#endif +#ifndef MSG_INTENSITY_W + #define MSG_INTENSITY_W _UxGT("White Intensity") +#endif +#ifndef MSG_LED_BRIGHTNESS + #define MSG_LED_BRIGHTNESS _UxGT("Brightness") +#endif + #ifndef MSG_MOVING #define MSG_MOVING _UxGT("Moving...") #endif @@ -839,7 +896,6 @@ #define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded") #endif #endif - #ifndef MSG_INFO_MIN_TEMP #define MSG_INFO_MIN_TEMP _UxGT("Min Temp") #endif diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index 239b262290..1b345d6b8a 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -55,6 +55,10 @@ #include "../feature/bedlevel/bedlevel.h" #endif +#if ENABLED(LED_CONTROL_MENU) + #include "../feature/leds/leds.h" +#endif + // For i2c define BUZZ to use lcd_buzz #if DISABLED(LCD_USE_I2C_BUZZER) #include "../libs/buzzer.h" @@ -185,6 +189,10 @@ uint16_t max_display_update_time = 0; void lcd_info_menu(); #endif // LCD_INFO_MENU + #if ENABLED(LED_CONTROL_MENU) + void lcd_led_menu(); + #endif + #if ENABLED(ADVANCED_PAUSE_FEATURE) void lcd_advanced_pause_toocold_menu(); void lcd_advanced_pause_option_menu(); @@ -1014,6 +1022,10 @@ void kill_screen(const char* lcd_msg) { MENU_ITEM(submenu, MSG_INFO_MENU, lcd_info_menu); #endif + #if ENABLED(LED_CONTROL_MENU) + MENU_ITEM(submenu, MSG_LED_CONTROL, lcd_led_menu); + #endif + END_MENU(); } @@ -3931,6 +3943,66 @@ void kill_screen(const char* lcd_msg) { } #endif // LCD_INFO_MENU + /** + * + * LED Menu + * + */ + + #if ENABLED(LED_CONTROL_MENU) + + #if ENABLED(LED_COLOR_PRESETS) + + void lcd_led_presets_menu() { + START_MENU(); + #if LCD_HEIGHT > 2 + STATIC_ITEM(MSG_LED_PRESETS, true, true); + #endif + MENU_BACK(MSG_LED_CONTROL); + MENU_ITEM(function, MSG_SET_LEDS_WHITE, leds.set_white); + MENU_ITEM(function, MSG_SET_LEDS_RED, leds.set_red); + MENU_ITEM(function, MSG_SET_LEDS_ORANGE, leds.set_orange); + MENU_ITEM(function, MSG_SET_LEDS_YELLOW,leds.set_yellow); + MENU_ITEM(function, MSG_SET_LEDS_GREEN, leds.set_green); + MENU_ITEM(function, MSG_SET_LEDS_BLUE, leds.set_blue); + MENU_ITEM(function, MSG_SET_LEDS_INDIGO, leds.set_indigo); + MENU_ITEM(function, MSG_SET_LEDS_VIOLET, leds.set_violet); + END_MENU(); + } + #endif // LED_COLOR_PRESETS + + void lcd_led_custom_menu() { + START_MENU(); + MENU_BACK(MSG_LED_CONTROL); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_R, &leds.color.r, 0, 255, leds.update, true); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_G, &leds.color.g, 0, 255, leds.update, true); + MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_B, &leds.color.b, 0, 255, leds.update, true); + #if ENABLED(RGBW_LED) || ENABLED(NEOPIXEL_LED) + MENU_ITEM_EDIT_CALLBACK(int8, MSG_INTENSITY_W, &leds.color.w, 0, 255, leds.update, true); + #if ENABLED(NEOPIXEL_LED) + MENU_ITEM_EDIT_CALLBACK(int8, MSG_LED_BRIGHTNESS, &leds.color.i, 0, 255, leds.update, true); + #endif + #endif + END_MENU(); + } + + void lcd_led_menu() { + START_MENU(); + MENU_BACK(MSG_MAIN); + if (leds.lights_on) + MENU_ITEM(function, MSG_LEDS_OFF, leds.toggle); + else + MENU_ITEM(function, MSG_LEDS_ON, leds.toggle); + MENU_ITEM(function, MSG_SET_LEDS_DEFAULT, leds.set_default); + #if ENABLED(LED_COLOR_PRESETS) + MENU_ITEM(submenu, MSG_LED_PRESETS, lcd_led_presets_menu); + #endif + MENU_ITEM(submenu, MSG_CUSTOM_LEDS, lcd_led_custom_menu); + END_MENU(); + } + + #endif // LED_CONTROL_MENU + /** * * Filament Change Feature Screens diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index ed71c70310..e5141429e7 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -1316,8 +1316,8 @@ void Planner::_buffer_line(const float &a, const float &b, const float &c, const // then the machine is not coasting anymore and the safe entry / exit velocities shall be used. // The junction velocity will be shared between successive segments. Limit the junction velocity to their minimum. - bool prev_speed_larger = previous_nominal_speed > block->nominal_speed; - float smaller_speed_factor = prev_speed_larger ? (block->nominal_speed / previous_nominal_speed) : (previous_nominal_speed / block->nominal_speed); + const bool prev_speed_larger = previous_nominal_speed > block->nominal_speed; + const float smaller_speed_factor = prev_speed_larger ? (block->nominal_speed / previous_nominal_speed) : (previous_nominal_speed / block->nominal_speed); // Pick the smaller of the nominal speeds. Higher speed shall not be achieved at the junction during coasting. vmax_junction = prev_speed_larger ? block->nominal_speed : previous_nominal_speed; // Factor to multiply the previous / current nominal velocities to get componentwise limited velocities. @@ -1449,10 +1449,10 @@ void Planner::_set_position_mm(const float &a, const float &b, const float &c, c #else #define _EINDEX E_AXIS #endif - long na = position[X_AXIS] = LROUND(a * axis_steps_per_mm[X_AXIS]), - nb = position[Y_AXIS] = LROUND(b * axis_steps_per_mm[Y_AXIS]), - nc = position[Z_AXIS] = LROUND(c * axis_steps_per_mm[Z_AXIS]), - ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]); + const long na = position[X_AXIS] = LROUND(a * axis_steps_per_mm[X_AXIS]), + nb = position[Y_AXIS] = LROUND(b * axis_steps_per_mm[Y_AXIS]), + nc = position[Z_AXIS] = LROUND(c * axis_steps_per_mm[Z_AXIS]), + ne = position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]); #if ENABLED(LIN_ADVANCE) position_float[X_AXIS] = a; position_float[Y_AXIS] = b;