0x90/Marlin
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

Overridable Options - Part 4 (PR#2556)

Browse source 
Apply `ENABLED` / `DISABLED` / `HAS_SERVOS` macros to pins files.
This commit is contained in:
Scott Lahteine 2015-07-30 22:11:19 -07:00 committed by Richard Wackerbarth
parent 4b40964064
commit c0d7ea3e7e
21 changed files with 99 additions and 95 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

18
Marlin/pins.h
View file

@ -175,7 +175,7 @@
#endif
#endif
#ifdef DISABLE_MAX_ENDSTOPS
#if ENABLED(DISABLE_MAX_ENDSTOPS)
#undef X_MAX_PIN
#undef Y_MAX_PIN
#undef Z_MAX_PIN
@ -184,7 +184,7 @@
#define Z_MAX_PIN -1
#endif
#ifdef DISABLE_MIN_ENDSTOPS
#if ENABLED(DISABLE_MIN_ENDSTOPS)
#undef X_MIN_PIN
#undef Y_MIN_PIN
#undef Z_MIN_PIN
@ -193,36 +193,36 @@
#define Z_MIN_PIN -1
#endif
#if defined(DISABLE_Z_PROBE_ENDSTOP) || !defined(Z_PROBE_ENDSTOP) // Allow code to compile regardless of Z_PROBE_ENDSTOP setting.
#if ENABLED(DISABLE_Z_PROBE_ENDSTOP) || DISABLED(Z_PROBE_ENDSTOP) // Allow code to compile regardless of Z_PROBE_ENDSTOP setting.
#undef Z_PROBE_PIN
#define Z_PROBE_PIN -1
#endif
#ifdef DISABLE_XMAX_ENDSTOP
#if ENABLED(DISABLE_XMAX_ENDSTOP)
#undef X_MAX_PIN
#define X_MAX_PIN -1
#endif
#ifdef DISABLE_XMIN_ENDSTOP
#if ENABLED(DISABLE_XMIN_ENDSTOP)
#undef X_MIN_PIN
#define X_MIN_PIN -1
#endif
#ifdef DISABLE_YMAX_ENDSTOP
#if ENABLED(DISABLE_YMAX_ENDSTOP)
#define Y_MAX_PIN -1
#endif
#ifdef DISABLE_YMIN_ENDSTOP
#if ENABLED(DISABLE_YMIN_ENDSTOP)
#undef Y_MIN_PIN
#define Y_MIN_PIN -1
#endif
#ifdef DISABLE_ZMAX_ENDSTOP
#if ENABLED(DISABLE_ZMAX_ENDSTOP)
#undef Z_MAX_PIN
#define Z_MAX_PIN -1
#endif
#ifdef DISABLE_ZMIN_ENDSTOP
#if ENABLED(DISABLE_ZMIN_ENDSTOP)
#undef Z_MIN_PIN
#define Z_MIN_PIN -1
#endif

2
Marlin/pins_3DRAG.h
View file

@ -29,7 +29,7 @@
#define HEATER_BED_PIN 9 // BED
#if defined(ULTRA_LCD) && defined(NEWPANEL)
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#undef BEEPER
#define BEEPER -1

2
Marlin/pins_5DPRINT.h
View file

@ -52,7 +52,7 @@
// The SDSS pin uses a different pin mapping from file Sd2PinMap.h
#define SDSS 20
#ifndef SDSUPPORT
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 9
#define MISO_PIN 11

10
Marlin/pins_AZTEEG_X3.h
View file

@ -6,7 +6,8 @@
//LCD Pins//
#if defined(VIKI2) || defined(miniVIKI)
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 33
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 31
@ -21,11 +22,14 @@
#define SDSS 53
#define SDCARDDETECT -1 // Pin 49 if using display sd interface
#ifdef TEMP_STAT_LEDS
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 64
#define STAT_LED_BLUE 63
#endif
#elif defined(TEMP_STAT_LEDS)
#elif ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 6
#define STAT_LED_BLUE 11
#endif

10
Marlin/pins_AZTEEG_X3_PRO.h
View file

@ -18,7 +18,7 @@
//MIN endstops soldered onto the board. Delta code wants the homing endstops to be
//the MAX so I swapped them here.
//
#ifdef DELTA
#if ENABLED(DELTA)
#undef X_MIN_PIN
#undef X_MAX_PIN
#undef Y_MIN_PIN
@ -34,7 +34,7 @@
#define Z_MAX_PIN 18
#endif
//
#ifdef Z_PROBE_ENDSTOP
#if ENABLED(Z_PROBE_ENDSTOP)
//#undef Z_MIN_PIN
//#define Z_MIN_PIN 15
#define Z_PROBE_PIN 19
@ -81,7 +81,7 @@
#undef SERVO2_PIN
#undef SERVO3_PIN
#ifdef NUM_SERVOS
#if HAS_SERVOS
#define SERVO0_PIN 47
#if NUM_SERVOS > 1
#define SERVO1_PIN -1
@ -96,7 +96,7 @@
//LCD Pins//
#if defined(VIKI2) || defined(miniVIKI)
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 33
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 44
@ -114,7 +114,7 @@
#define KILL_PIN 31
#endif
#ifdef TEMP_STAT_LEDS
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 32
#define STAT_LED_BLUE 35
#endif

2
Marlin/pins_BRAINWAVE.h
View file

@ -50,7 +50,7 @@
#define KILL_PIN -1
#define ALARM_PIN -1
#ifndef SDSUPPORT
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 9
#define MISO_PIN 11

2
Marlin/pins_BRAINWAVE_PRO.h
View file

@ -56,7 +56,7 @@
#define ALARM_PIN -1
#define SDCARDDETECT 12
#ifndef SDSUPPORT
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 21
#define MISO_PIN 23

4
Marlin/pins_ELEFU_3.h
View file

@ -61,7 +61,7 @@
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
#define PHOTOGRAPH_PIN 29
#ifdef RA_CONTROL_PANEL
#if ENABLED(RA_CONTROL_PANEL)
#define SDSS 53
#define SDCARDDETECT 28
@ -76,7 +76,7 @@
#endif // RA_CONTROL_PANEL
#ifdef RA_DISCO
#if ENABLED(RA_DISCO)
//variables for which pins the TLC5947 is using
#define TLC_CLOCK_PIN 25
#define TLC_BLANK_PIN 23

2
Marlin/pins_FELIX2.h
View file

@ -14,7 +14,7 @@
#define PS_ON_PIN 12
#if defined(ULTRA_LCD) && defined(NEWPANEL)
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
#define BLEN_C 2
#define BLEN_B 1

4
Marlin/pins_MEGATRONICS_3.h
View file

@ -9,12 +9,12 @@
#define LARGE_FLASH true
#ifdef Z_PROBE_SLED
#if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1
#endif
// Servo support
#ifdef NUM_SERVOS
#if HAS_SERVOS
#define SERVO0_PIN 46 //AUX3-6
#if NUM_SERVOS > 1
#define SERVO1_PIN 47 //AUX3-5

6
Marlin/pins_MINIRAMBO.h
View file

@ -53,7 +53,7 @@
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#ifdef BARICUDA
#if ENABLED(BARICUDA)
#define HEATER_2_PIN 6
#else
#define HEATER_2_PIN -1
@ -88,9 +88,9 @@
#define KILL_PIN -1 //80 with Smart Controller LCD
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#ifdef ULTRA_LCD
#if ENABLED(ULTRA_LCD)
#define KILL_PIN 32
#ifdef NEWPANEL
#if ENABLED(NEWPANEL)
//arduino pin which triggers an piezzo beeper
#define BEEPER 84 // Beeper on AUX-4
#define LCD_PINS_RS 82

16
Marlin/pins_PRINTRBOARD.h
View file

@ -9,7 +9,7 @@
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
#endif
#ifdef AT90USBxx_TEENSYPP_ASSIGNMENTS // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional.
#if ENABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional.
#error These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h
#endif
@ -38,7 +38,7 @@
// If soft or fast PWM is off then use Teensyduino pin numbering, Marlin
// fastio pin numbering otherwise
#ifdef FAN_SOFT_PWM || FAST_PWM_FAN
#if ENABLED(FAN_SOFT_PWM) || ENABLED(FAST_PWM_FAN)
#define FAN_PIN 22
#else
#define FAN_PIN 16
@ -54,7 +54,7 @@
#define TEMP_0_PIN 1 // Extruder / Analog pin numbering
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering
#ifdef FILAMENT_SENSOR
#if ENABLED(FILAMENT_SENSOR)
#define FILWIDTH_PIN 2
#endif
@ -70,18 +70,18 @@
#define KILL_PIN -1
#define ALARM_PIN -1
#ifndef SDSUPPORT
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 9
#define MISO_PIN 11
#define MOSI_PIN 10
#endif
#if defined(ULTRA_LCD) && defined(NEWPANEL)
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
//we have no buzzer installed
#define BEEPER -1
//LCD Pins
#ifdef LCD_I2C_PANELOLU2
#if ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 27 //RX1 - fastio.h pin mapping 27
#define BTN_EN2 26 //TX1 - fastio.h pin mapping 26
#define BTN_ENC 43 //A3 - fastio.h pin mapping 43
@ -91,7 +91,7 @@
#define SDCARDDETECT -1
#endif // ULTRA_LCD && NEWPANEL
#if defined(VIKI2) || defined(miniVIKI)
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 32 //FastIO
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 42 //Non-FastIO
@ -106,7 +106,7 @@
#define SDSS 45
#define SDCARDDETECT -1 // FastIO (Manual says 72 I'm not certain cause I can't test)
#ifdef TEMP_STAT_LEDS
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 12 //Non-FastIO
#define STAT_LED_BLUE 10 //Non-FastIO
#endif

16
Marlin/pins_RAMBO.h
View file

@ -9,7 +9,7 @@
#define LARGE_FLASH true
// Servo support
#ifdef NUM_SERVOS
#if HAS_SERVOS
#define SERVO0_PIN 22 //motor header MX1
#if NUM_SERVOS > 1
#define SERVO1_PIN 23 //Motor header MX2
@ -22,7 +22,7 @@
#endif
#endif
#ifdef Z_PROBE_SLED
#if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1
#endif
@ -70,7 +70,7 @@
#define HEATER_1_PIN 7
#define TEMP_1_PIN 1
#ifdef BARICUDA
#if ENABLED(BARICUDA)
#define HEATER_2_PIN 6
#else
#define HEATER_2_PIN -1
@ -109,9 +109,9 @@
#define KILL_PIN -1 //80 with Smart Controller LCD
#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing.
#ifdef ULTRA_LCD
#if ENABLED(ULTRA_LCD)
#define KILL_PIN 80
#ifdef NEWPANEL
#if ENABLED(NEWPANEL)
//arduino pin which triggers an piezzo beeper
#define BEEPER 79 // Beeper on AUX-4
#define LCD_PINS_RS 70
@ -164,7 +164,7 @@
#endif // ULTRA_LCD
#if defined(VIKI2) || defined(miniVIKI)
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER 44
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 70
@ -178,13 +178,13 @@
#define SDCARDDETECT -1 // Pin 72 if using easy adapter board
#ifdef TEMP_STAT_LEDS
#if ENABLED(TEMP_STAT_LEDS)
#define STAT_LED_RED 22
#define STAT_LED_BLUE 32
#endif
#endif // VIKI2/miniVIKI
#ifdef FILAMENT_SENSOR
#if ENABLED(FILAMENT_SENSOR)
//Filip added pin for Filament sensor analog input
#define FILWIDTH_PIN 3
#endif

41
Marlin/pins_RAMPS_13.h
View file

@ -61,23 +61,23 @@
#define SDSS 53
#define LED_PIN 13
#if MB(RAMPS_13_EEB) && defined(FILAMENT_SENSOR) // FMM added for Filament Extruder
#if MB(RAMPS_13_EEB) && ENABLED(FILAMENT_SENSOR) // FMM added for Filament Extruder
// define analog pin for the filament width sensor input
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
#define FILWIDTH_PIN 5
#endif
#ifdef Z_PROBE_ENDSTOP
#if ENABLED(Z_PROBE_ENDSTOP)
// Define a pin to use as the signal pin on Arduino for the Z_PROBE endstop.
#define Z_PROBE_PIN 32
#endif
#ifdef FILAMENT_RUNOUT_SENSOR
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
#define FILRUNOUT_PIN 4
#endif
#if MB(RAMPS_13_EFF) || defined(IS_RAMPS_EFB)
#if MB(RAMPS_13_EFF) || ENABLED(IS_RAMPS_EFB)
#define FAN_PIN 9 // (Sprinter config)
#if MB(RAMPS_13_EFF)
#define CONTROLLERFAN_PIN -1 // Pin used for the fan to cool controller
@ -90,7 +90,7 @@
#define PS_ON_PIN 12
#if defined(REPRAP_DISCOUNT_SMART_CONTROLLER) || defined(G3D_PANEL)
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL)
#define KILL_PIN 41
#else
#define KILL_PIN -1
@ -102,7 +102,7 @@
#define HEATER_0_PIN 10 // EXTRUDER 1
#endif
#if MB(RAMPS_13_SF) || defined(IS_RAMPS_EFB)
#if MB(RAMPS_13_SF) || ENABLED(IS_RAMPS_EFB)
#define HEATER_1_PIN -1
#else
#define HEATER_1_PIN 9 // EXTRUDER 2 (FAN On Sprinter)
@ -122,7 +122,7 @@
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#ifdef NUM_SERVOS
#if HAS_SERVOS
#define SERVO0_PIN 11
#if NUM_SERVOS > 1
#define SERVO1_PIN 6
@ -135,15 +135,14 @@
#endif
#endif
#ifdef Z_PROBE_SLED
#if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1
#endif
#ifdef ULTRA_LCD
#if ENABLED(ULTRA_LCD)
#ifdef NEWPANEL
#ifdef PANEL_ONE
#if ENABLED(NEWPANEL)
#if ENABLED(PANEL_ONE)
#define LCD_PINS_RS 40
#define LCD_PINS_ENABLE 42
#define LCD_PINS_D4 65
@ -159,7 +158,7 @@
#define LCD_PINS_D7 29
#endif
#ifdef REPRAP_DISCOUNT_SMART_CONTROLLER
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER 37
#define BTN_EN1 31
@ -167,20 +166,20 @@
#define BTN_ENC 35
#define SDCARDDETECT 49
#elif defined(LCD_I2C_PANELOLU2)
#elif ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
#define BTN_EN2 43
#define BTN_ENC 32
#define LCD_SDSS 53
#define SDCARDDETECT -1
#define KILL_PIN 41
#elif defined(LCD_I2C_VIKI)
#elif ENABLED(LCD_I2C_VIKI)
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
#define BTN_EN2 7
#define BTN_ENC -1
#define LCD_SDSS 53
#define SDCARDDETECT 49
#elif defined(ELB_FULL_GRAPHIC_CONTROLLER)
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
#define BTN_EN2 37
#define BTN_ENC 31
@ -217,14 +216,14 @@
#define BEEPER 33 // Beeper on AUX-4
// buttons are directly attached using AUX-2
#ifdef REPRAPWORLD_KEYPAD
#if ENABLED(REPRAPWORLD_KEYPAD)
#define BTN_EN1 64 // encoder
#define BTN_EN2 59 // encoder
#define BTN_ENC 63 // enter button
#define SHIFT_OUT 40 // shift register
#define SHIFT_CLK 44 // shift register
#define SHIFT_LD 42 // shift register
#elif defined(PANEL_ONE)
#elif ENABLED(PANEL_ONE)
#define BTN_EN1 59 // AUX2 PIN 3
#define BTN_EN2 63 // AUX2 PIN 4
#define BTN_ENC 49 // AUX3 PIN 7
@ -234,7 +233,7 @@
#define BTN_ENC 31 // the click
#endif
#ifdef G3D_PANEL
#if ENABLED(G3D_PANEL)
#define SDCARDDETECT 49
#else
#define SDCARDDETECT -1 // Ramps does not use this port
@ -264,13 +263,13 @@
#endif // ULTRA_LCD
// SPI for Max6675 Thermocouple
#ifndef SDSUPPORT
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
#ifndef SDSUPPORT
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 52
#define MISO_PIN 50

6
Marlin/pins_RAMPS_OLD.h
View file

@ -37,7 +37,7 @@
#define PS_ON_PIN -1
#define KILL_PIN -1
#ifdef RAMPS_V_1_0 // RAMPS_V_1_0
#if ENABLED(RAMPS_V_1_0) // RAMPS_V_1_0
#define HEATER_0_PIN 12 // RAMPS 1.0
#define HEATER_BED_PIN -1 // RAMPS 1.0
#define FAN_PIN 11 // RAMPS 1.0
@ -55,13 +55,13 @@
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
// SPI for Max6675 Thermocouple
#ifndef SDSUPPORT
#if DISABLED(SDSUPPORT)
#define MAX6675_SS 66// Do not use pin 53 if there is even the remote possibility of using Display/SD card
#else
#define MAX6675_SS 66// Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
#endif
#ifndef SDSUPPORT
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 52
#define MISO_PIN 50

4
Marlin/pins_RIGIDBOARD.h
View file

@ -4,7 +4,7 @@
#include "pins_RAMPS_13.h"
#ifdef Z_PROBE_ENDSTOP
#if ENABLED(Z_PROBE_ENDSTOP)
#define Z_PROBE_PIN 19
#endif
@ -20,7 +20,7 @@
// LCD Panel options for the RigidBoard
#ifdef RIGIDBOT_PANEL
#if ENABLED(RIGIDBOT_PANEL)
#undef BEEPER
#define BEEPER -1

19
Marlin/pins_SANGUINOLOLU_11.h
View file

@ -33,11 +33,11 @@
#endif
#endif
#ifdef Z_PROBE_SLED
#if ENABLED(Z_PROBE_SLED)
#define SLED_PIN -1
#endif
#ifdef NUM_SERVOS
#if HAS_SERVOS
#define SERVO0_PIN -1
#if NUM_SERVOS > 1
#define SERVO1_PIN -1
@ -57,7 +57,7 @@
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#ifdef SANGUINOLOLU_V_1_2
#if ENABLED(SANGUINOLOLU_V_1_2)
#define HEATER_BED_PIN 12 // (bed)
#define X_ENABLE_PIN 14
@ -65,7 +65,7 @@
#define Z_ENABLE_PIN 26
#define E0_ENABLE_PIN 14
#ifdef LCD_I2C_PANELOLU2
#if ENABLED(LCD_I2C_PANELOLU2)
#define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan
#endif
@ -92,15 +92,15 @@
*/
//#define SDSS 24
#if defined(ULTRA_LCD) && defined(NEWPANEL)
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
// No buzzer installed
#define BEEPER -1
// LCD Pins
#ifdef DOGLCD
#if ENABLED(DOGLCD)
#ifdef U8GLIB_ST7920 //SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
#if ENABLED(U8GLIB_ST7920) //SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
#if MB(MELZI) // Melzi board
#define LCD_PINS_RS 30 //CS chip select /SS chip slave select
@ -144,7 +144,7 @@
//The encoder and click button
#define BTN_EN1 11
#define BTN_EN2 10
#ifdef LCD_I2C_PANELOLU2
#if ENABLED(LCD_I2C_PANELOLU2)
#if MB(MELZI)
#define BTN_ENC 29
#define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi
@ -158,9 +158,10 @@
#define SDCARDDETECT -1
#elif defined(MAKRPANEL)
#elif ENABLED(MAKRPANEL)
#define BEEPER 29
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 30
#define DOGLCD_CS 17

8
Marlin/pins_SAV_MKI.h
View file

@ -45,7 +45,7 @@
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#ifndef SDSUPPORT
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 9
#define MISO_PIN 11
@ -93,13 +93,13 @@
#define LCD_PINS_D6 -1
#define LCD_PINS_D7 -1
#ifdef SAV_3DLCD
#if ENABLED(SAV_3DLCD)
// For LCD SHIFT register LCD
#define SR_DATA_PIN EXT_AUX_SDA_D1
#define SR_CLK_PIN EXT_AUX_SCL_D0
#endif // SAV_3DLCD
#if defined(SAV_3DLCD)||defined(SAV_3DGLCD)
#if ENABLED(SAV_3DLCD) || ENABLED(SAV_3DGLCD)
#define BTN_EN1 EXT_AUX_A1_IO
#define BTN_EN2 EXT_AUX_A0_IO
#define BTN_ENC EXT_AUX_PWM_D24
@ -108,6 +108,6 @@
#define HOME_PIN EXT_AUX_A4_IO
#endif // SAV_3DLCD || SAV_3DGLCD
#ifdef NUM_SERVOS
#if HAS_SERVOS
#define SERVO0_PIN 41 // In teensy's pin definition for pinMode (in servo.cpp)
#endif

4
Marlin/pins_TEENSY2.h
View file

@ -93,14 +93,14 @@
#define KILL_PIN -1
#define ALARM_PIN -1
#ifndef SDSUPPORT
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 21 // 9
#define MISO_PIN 23 // 11
#define MOSI_PIN 22 // 10
#endif
#ifdef ULTIPANEL
#if ENABLED(ULTIPANEL)
#define LCD_PINS_RS 8
#define LCD_PINS_ENABLE 9
#define LCD_PINS_D4 10

10
Marlin/pins_TEENSYLU.h
View file

@ -9,7 +9,7 @@
#error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
#endif
#ifdef AT90USBxx_TEENSYPP_ASSIGNMENTS // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional.
#if ENABLED(AT90USBxx_TEENSYPP_ASSIGNMENTS) // use Teensyduino Teensy++2.0 pin assignments instead of Marlin traditional.
#error These Teensylu assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h
#endif
@ -38,7 +38,7 @@
// If soft or fast PWM is off then use Teensyduino pin numbering, Marlin
// fastio pin numbering otherwise
#ifdef FAN_SOFT_PWM || FAST_PWM_FAN
#if ENABLED(FAN_SOFT_PWM) || ENABLED(FAST_PWM_FAN)
#define FAN_PIN 22
#else
#define FAN_PIN 16
@ -60,18 +60,18 @@
#define KILL_PIN -1
#define ALARM_PIN -1
#ifndef SDSUPPORT
#if DISABLED(SDSUPPORT)
// these pins are defined in the SD library if building with SD support
#define SCK_PIN 9
#define MISO_PIN 11
#define MOSI_PIN 10
#endif
#if defined(ULTRA_LCD) && defined(NEWPANEL)
#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL)
//we have no buzzer installed
#define BEEPER -1
//LCD Pins
#ifdef LCD_I2C_PANELOLU2
#if ENABLED(LCD_I2C_PANELOLU2)
#define BTN_EN1 27 //RX1 - fastio.h pin mapping 27
#define BTN_EN2 26 //TX1 - fastio.h pin mapping 26
#define BTN_ENC 43 //A3 - fastio.h pin mapping 43

4
Marlin/pins_ULTIMAKER.h
View file

@ -55,9 +55,9 @@
#define SUICIDE_PIN 54 //PIN that has to be turned on right after start, to keep power flowing.
#define SERVO0_PIN 13 // untested
#ifdef ULTRA_LCD
#if ENABLED(ULTRA_LCD)
#ifdef NEWPANEL
#if ENABLED(NEWPANEL)
//arduino pin witch triggers an piezzo beeper
#define BEEPER 18