diff --git a/.github/FUNDING.yml b/.github/FUNDING.yml index 70734d4972..a973242932 100644 --- a/.github/FUNDING.yml +++ b/.github/FUNDING.yml @@ -1,3 +1,3 @@ github: [thinkyhead] patreon: thinkyhead -custom: ["http://www.thinkyhead.com/donate-to-marlin"] +custom: ["https://www.thinkyhead.com/donate-to-marlin"] diff --git a/.github/contributing.md b/.github/contributing.md index 589f14581a..6bc7b5a005 100644 --- a/.github/contributing.md +++ b/.github/contributing.md @@ -34,16 +34,15 @@ This project and everyone participating in it is governed by the [Marlin Code of We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions. -* [Marlin RepRap forum](http://forums.reprap.org/list.php?415) +* [Marlin RepRap forum](https://reprap.org/forum/list.php?415) * [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/) -If chat is more your speed, you can join the MarlinFirmware Slack team: +If chat is more your speed, you can join the MarlinFirmware Discord server: -* Join the Marlin Slack Team - * To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead. - * Even though Slack is a chat service, sometimes it takes several hours for community members to respond — please be patient! - * Use the `#general` channel for general questions or discussion about Marlin. - * Other channels exist for certain topics. Check the channel list. +* Use the link https://discord.gg/n5NJ59y to join up as a General User. +* Even though our Discord is pretty active, it may take a while for community members to respond — please be patient! +* Use the `#general` channel for general questions or discussion about Marlin. +* Other channels exist for certain topics or are limited to Patrons. Check the channel list. ## How Can I Contribute? diff --git a/.github/issue_template.md b/.github/issue_template.md index ecfb36f0d5..6cb34b8f58 100644 --- a/.github/issue_template.md +++ b/.github/issue_template.md @@ -2,9 +2,13 @@ Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md -Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y. +Do you want to ask a question? Are you looking for support? Please don't post here. Instead use one of the following options: -Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed. +- The Marlin Firmware forum at https://reprap.org/forum/list.php?415 +- The MarlinFirmware Facebook Group at https://www.facebook.com/groups/1049718498464482/ +- The MarlinFirmware Discord Server at https://discord.gg/n5NJ59y. + +Before filing an issue be sure to test the latest "bugfix" branch to see whether the issue is already addressed. --> diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 7804452561..c11b02bc52 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -473,7 +473,7 @@ //=========================================================================== //============================= PID Settings ================================ //=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning +// PID Tuning Guide here: https://reprap.org/wiki/PID_Tuning // Comment the following line to disable PID and enable bang-bang. #define PIDTEMP diff --git a/Marlin/Marlin.ino b/Marlin/Marlin.ino index 213c18a94e..57c825445f 100644 --- a/Marlin/Marlin.ino +++ b/Marlin/Marlin.ino @@ -37,7 +37,7 @@ Configuration Getting Help - - http://forums.reprap.org/list.php?415 + - https://reprap.org/forum/list.php?415 The Marlin Discussion Forum is a great place to get help from other Marlin users who may have experienced similar issues to your own. diff --git a/Marlin/src/HAL/AVR/fastio.h b/Marlin/src/HAL/AVR/fastio.h index c3239186ba..bd6935aaf0 100644 --- a/Marlin/src/HAL/AVR/fastio.h +++ b/Marlin/src/HAL/AVR/fastio.h @@ -57,7 +57,7 @@ * * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html */ #define _READ(IO) TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN) diff --git a/Marlin/src/HAL/DUE/Tone.cpp b/Marlin/src/HAL/DUE/Tone.cpp index e6c72c728b..9beb602223 100644 --- a/Marlin/src/HAL/DUE/Tone.cpp +++ b/Marlin/src/HAL/DUE/Tone.cpp @@ -24,7 +24,7 @@ /** * Description: Tone function for Arduino Due and compatible (SAM3X8E) - * Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012 + * Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012 */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/fastio.h b/Marlin/src/HAL/DUE/fastio.h index 9d6bfa164a..286319302d 100644 --- a/Marlin/src/HAL/DUE/fastio.h +++ b/Marlin/src/HAL/DUE/fastio.h @@ -58,7 +58,7 @@ * * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html */ // Read a pin diff --git a/Marlin/src/HAL/DUE/usb/arduino_due_x.h b/Marlin/src/HAL/DUE/usb/arduino_due_x.h index 7355f74f6d..b5be621791 100644 --- a/Marlin/src/HAL/DUE/usb/arduino_due_x.h +++ b/Marlin/src/HAL/DUE/usb/arduino_due_x.h @@ -43,7 +43,7 @@ #pragma once /** - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ /** diff --git a/Marlin/src/HAL/DUE/usb/compiler.h b/Marlin/src/HAL/DUE/usb/compiler.h index 33df080e2f..7b746543c4 100644 --- a/Marlin/src/HAL/DUE/usb/compiler.h +++ b/Marlin/src/HAL/DUE/usb/compiler.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef UTILS_COMPILER_H diff --git a/Marlin/src/HAL/DUE/usb/conf_access.h b/Marlin/src/HAL/DUE/usb/conf_access.h index fdac1ab7e8..f401685223 100644 --- a/Marlin/src/HAL/DUE/usb/conf_access.h +++ b/Marlin/src/HAL/DUE/usb/conf_access.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _CONF_ACCESS_H_ diff --git a/Marlin/src/HAL/DUE/usb/conf_clock.h b/Marlin/src/HAL/DUE/usb/conf_clock.h index d0f68500ad..97e70e99a5 100644 --- a/Marlin/src/HAL/DUE/usb/conf_clock.h +++ b/Marlin/src/HAL/DUE/usb/conf_clock.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef CONF_CLOCK_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/conf_usb.h b/Marlin/src/HAL/DUE/usb/conf_usb.h index 7beb9b0bba..4de9e347e2 100644 --- a/Marlin/src/HAL/DUE/usb/conf_usb.h +++ b/Marlin/src/HAL/DUE/usb/conf_usb.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _CONF_USB_H_ diff --git a/Marlin/src/HAL/DUE/usb/ctrl_access.c b/Marlin/src/HAL/DUE/usb/ctrl_access.c index 0ec14e0b8f..99f97f62cb 100644 --- a/Marlin/src/HAL/DUE/usb/ctrl_access.c +++ b/Marlin/src/HAL/DUE/usb/ctrl_access.c @@ -53,7 +53,7 @@ * ******************************************************************************/ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/ctrl_access.h b/Marlin/src/HAL/DUE/usb/ctrl_access.h index af6c8ceb96..b33839076e 100644 --- a/Marlin/src/HAL/DUE/usb/ctrl_access.h +++ b/Marlin/src/HAL/DUE/usb/ctrl_access.h @@ -53,7 +53,7 @@ * ******************************************************************************/ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ diff --git a/Marlin/src/HAL/DUE/usb/genclk.h b/Marlin/src/HAL/DUE/usb/genclk.h index 895aba0352..cde03bc0d1 100644 --- a/Marlin/src/HAL/DUE/usb/genclk.h +++ b/Marlin/src/HAL/DUE/usb/genclk.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef CHIP_GENCLK_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/mrepeat.h b/Marlin/src/HAL/DUE/usb/mrepeat.h index 5a2017be99..8363d9cde3 100644 --- a/Marlin/src/HAL/DUE/usb/mrepeat.h +++ b/Marlin/src/HAL/DUE/usb/mrepeat.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _MREPEAT_H_ diff --git a/Marlin/src/HAL/DUE/usb/osc.h b/Marlin/src/HAL/DUE/usb/osc.h index 3a9543507b..953bcbbed1 100644 --- a/Marlin/src/HAL/DUE/usb/osc.h +++ b/Marlin/src/HAL/DUE/usb/osc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef CHIP_OSC_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/pll.h b/Marlin/src/HAL/DUE/usb/pll.h index d3d2174870..8eaf27672b 100644 --- a/Marlin/src/HAL/DUE/usb/pll.h +++ b/Marlin/src/HAL/DUE/usb/pll.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef CHIP_PLL_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/preprocessor.h b/Marlin/src/HAL/DUE/usb/preprocessor.h index 184c03ae71..c12d01cb64 100644 --- a/Marlin/src/HAL/DUE/usb/preprocessor.h +++ b/Marlin/src/HAL/DUE/usb/preprocessor.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _PREPROCESSOR_H_ diff --git a/Marlin/src/HAL/DUE/usb/sbc_protocol.h b/Marlin/src/HAL/DUE/usb/sbc_protocol.h index 082b735fa6..ab845739fd 100644 --- a/Marlin/src/HAL/DUE/usb/sbc_protocol.h +++ b/Marlin/src/HAL/DUE/usb/sbc_protocol.h @@ -52,7 +52,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _SBC_PROTOCOL_H_ #define _SBC_PROTOCOL_H_ diff --git a/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h b/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h index 6df82c146b..d77e4f9523 100644 --- a/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h +++ b/Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h @@ -42,7 +42,7 @@ * ******************************************************************************/ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ diff --git a/Marlin/src/HAL/DUE/usb/spc_protocol.h b/Marlin/src/HAL/DUE/usb/spc_protocol.h index 6fadb9f36c..d67cc5c788 100644 --- a/Marlin/src/HAL/DUE/usb/spc_protocol.h +++ b/Marlin/src/HAL/DUE/usb/spc_protocol.h @@ -45,7 +45,7 @@ */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _SPC_PROTOCOL_H_ #define _SPC_PROTOCOL_H_ diff --git a/Marlin/src/HAL/DUE/usb/stringz.h b/Marlin/src/HAL/DUE/usb/stringz.h index b914b73489..fc9aaf38a4 100644 --- a/Marlin/src/HAL/DUE/usb/stringz.h +++ b/Marlin/src/HAL/DUE/usb/stringz.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _STRINGZ_H_ diff --git a/Marlin/src/HAL/DUE/usb/sysclk.c b/Marlin/src/HAL/DUE/usb/sysclk.c index 899244dd88..cbb4e2c9ef 100644 --- a/Marlin/src/HAL/DUE/usb/sysclk.c +++ b/Marlin/src/HAL/DUE/usb/sysclk.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/sysclk.h b/Marlin/src/HAL/DUE/usb/sysclk.h index 48c99de298..16db8c86d3 100644 --- a/Marlin/src/HAL/DUE/usb/sysclk.h +++ b/Marlin/src/HAL/DUE/usb/sysclk.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef CHIP_SYSCLK_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/tpaste.h b/Marlin/src/HAL/DUE/usb/tpaste.h index f8ec44a41d..2ad3f2758e 100644 --- a/Marlin/src/HAL/DUE/usb/tpaste.h +++ b/Marlin/src/HAL/DUE/usb/tpaste.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _TPASTE_H_ diff --git a/Marlin/src/HAL/DUE/usb/udc.c b/Marlin/src/HAL/DUE/usb/udc.c index 048a902d3b..60bf0cfff3 100644 --- a/Marlin/src/HAL/DUE/usb/udc.c +++ b/Marlin/src/HAL/DUE/usb/udc.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/udc.h b/Marlin/src/HAL/DUE/usb/udc.h index 885bdf04d6..8d92eb5c03 100644 --- a/Marlin/src/HAL/DUE/usb/udc.h +++ b/Marlin/src/HAL/DUE/usb/udc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDC_H_ diff --git a/Marlin/src/HAL/DUE/usb/udc_desc.h b/Marlin/src/HAL/DUE/usb/udc_desc.h index 88ed08a961..052ca08eca 100644 --- a/Marlin/src/HAL/DUE/usb/udc_desc.h +++ b/Marlin/src/HAL/DUE/usb/udc_desc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDC_DESC_H_ diff --git a/Marlin/src/HAL/DUE/usb/udd.h b/Marlin/src/HAL/DUE/usb/udd.h index c87763de23..7ec8c03dee 100644 --- a/Marlin/src/HAL/DUE/usb/udd.h +++ b/Marlin/src/HAL/DUE/usb/udd.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDD_H_ diff --git a/Marlin/src/HAL/DUE/usb/udi.h b/Marlin/src/HAL/DUE/usb/udi.h index 709908cad9..febf03b718 100644 --- a/Marlin/src/HAL/DUE/usb/udi.h +++ b/Marlin/src/HAL/DUE/usb/udi.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDI_H_ diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc.c b/Marlin/src/HAL/DUE/usb/udi_cdc.c index 60c9546ce2..cbe23dbb68 100644 --- a/Marlin/src/HAL/DUE/usb/udi_cdc.c +++ b/Marlin/src/HAL/DUE/usb/udi_cdc.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc.h b/Marlin/src/HAL/DUE/usb/udi_cdc.h index 526419c860..0ecf7bb00e 100644 --- a/Marlin/src/HAL/DUE/usb/udi_cdc.h +++ b/Marlin/src/HAL/DUE/usb/udi_cdc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDI_CDC_H_ @@ -701,7 +701,7 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s * another "Composite Device" module, like "USB HID Mouse (Composite Device)". * * Also, you can refer to application note - * + * * AVR4902 ASF - USB Composite Device. * * \section udi_cdc_use_case_composite_setup Setup steps diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h b/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h index cbd3eb00ae..d406a87743 100644 --- a/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h +++ b/Marlin/src/HAL/DUE/usb/udi_cdc_conf.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDI_CDC_CONF_H_ diff --git a/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c b/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c index 8f730ba823..97c334e2a8 100644 --- a/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c +++ b/Marlin/src/HAL/DUE/usb/udi_cdc_desc.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/udi_composite_desc.c b/Marlin/src/HAL/DUE/usb/udi_composite_desc.c index 07bdd1b9d6..da74fbe60d 100644 --- a/Marlin/src/HAL/DUE/usb/udi_composite_desc.c +++ b/Marlin/src/HAL/DUE/usb/udi_composite_desc.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/udi_msc.c b/Marlin/src/HAL/DUE/usb/udi_msc.c index 627bca0d4f..b7c3bb5ea0 100644 --- a/Marlin/src/HAL/DUE/usb/udi_msc.c +++ b/Marlin/src/HAL/DUE/usb/udi_msc.c @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/udi_msc.h b/Marlin/src/HAL/DUE/usb/udi_msc.h index c632ee4aac..730dbc8eec 100644 --- a/Marlin/src/HAL/DUE/usb/udi_msc.h +++ b/Marlin/src/HAL/DUE/usb/udi_msc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _UDI_MSC_H_ @@ -290,7 +290,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size, * another "Composite Device" module, like "USB HID Mouse (Composite Device)". * * Also, you can refer to application note - * + * * AVR4902 ASF - USB Composite Device. * * \section udi_msc_use_case_composite_setup Setup steps diff --git a/Marlin/src/HAL/DUE/usb/uotghs_device_due.c b/Marlin/src/HAL/DUE/usb/uotghs_device_due.c index 2a10190c7e..e13232a39c 100644 --- a/Marlin/src/HAL/DUE/usb/uotghs_device_due.c +++ b/Marlin/src/HAL/DUE/usb/uotghs_device_due.c @@ -42,7 +42,7 @@ */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/uotghs_device_due.h b/Marlin/src/HAL/DUE/usb/uotghs_device_due.h index 97877994bf..6df26d63df 100644 --- a/Marlin/src/HAL/DUE/usb/uotghs_device_due.h +++ b/Marlin/src/HAL/DUE/usb/uotghs_device_due.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef UOTGHS_DEVICE_DUE_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/uotghs_otg.h b/Marlin/src/HAL/DUE/usb/uotghs_otg.h index 86c903b2c1..eca5e938bb 100644 --- a/Marlin/src/HAL/DUE/usb/uotghs_otg.h +++ b/Marlin/src/HAL/DUE/usb/uotghs_otg.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef UOTGHS_OTG_H_INCLUDED diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol.h b/Marlin/src/HAL/DUE/usb/usb_protocol.h index 31c783f974..ea51a86896 100644 --- a/Marlin/src/HAL/DUE/usb/usb_protocol.h +++ b/Marlin/src/HAL/DUE/usb/usb_protocol.h @@ -44,7 +44,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _USB_PROTOCOL_H_ diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h b/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h index 49fc7387ef..d594db52e3 100644 --- a/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h +++ b/Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _USB_PROTOCOL_CDC_H_ #define _USB_PROTOCOL_CDC_H_ diff --git a/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h b/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h index db8f9cafd0..0fef308046 100644 --- a/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h +++ b/Marlin/src/HAL/DUE/usb/usb_protocol_msc.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _USB_PROTOCOL_MSC_H_ diff --git a/Marlin/src/HAL/DUE/usb/usb_task.c b/Marlin/src/HAL/DUE/usb/usb_task.c index 29d02faef7..66bdb265d8 100644 --- a/Marlin/src/HAL/DUE/usb/usb_task.c +++ b/Marlin/src/HAL/DUE/usb/usb_task.c @@ -41,7 +41,7 @@ * */ -// Support and FAQ: visit Atmel Support +// Support and FAQ: visit Atmel Support #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/usb/usb_task.h b/Marlin/src/HAL/DUE/usb/usb_task.h index fad62fda50..e9831ae062 100644 --- a/Marlin/src/HAL/DUE/usb/usb_task.h +++ b/Marlin/src/HAL/DUE/usb/usb_task.h @@ -41,7 +41,7 @@ * */ /* - * Support and FAQ: visit Atmel Support + * Support and FAQ: visit Atmel Support */ #ifndef _USB_TASK_H_ diff --git a/Marlin/src/HAL/LINUX/fastio.h b/Marlin/src/HAL/LINUX/fastio.h index 8f18d6ab60..4567c62a51 100644 --- a/Marlin/src/HAL/LINUX/fastio.h +++ b/Marlin/src/HAL/LINUX/fastio.h @@ -44,7 +44,7 @@ * * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html */ /// Read a pin diff --git a/Marlin/src/HAL/LPC1768/fastio.h b/Marlin/src/HAL/LPC1768/fastio.h index 31cd8772d1..c553ffb182 100644 --- a/Marlin/src/HAL/LPC1768/fastio.h +++ b/Marlin/src/HAL/LPC1768/fastio.h @@ -56,7 +56,7 @@ * * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html */ /// Read a pin diff --git a/Marlin/src/HAL/STM32F1/SPI.cpp b/Marlin/src/HAL/STM32F1/SPI.cpp index 991ceb3148..80095ba1dc 100644 --- a/Marlin/src/HAL/STM32F1/SPI.cpp +++ b/Marlin/src/HAL/STM32F1/SPI.cpp @@ -216,7 +216,7 @@ void SPIClass::setDataMode(uint8_t dataMode) { /** * Notes: * As far as we know the AVR numbers for dataMode match the numbers required by the STM32. - * From the AVR doc http://www.atmel.com/images/doc2585.pdf section 2.4 + * From the AVR doc https://www.atmel.com/images/doc2585.pdf section 2.4 * * SPI Mode CPOL CPHA Shift SCK-edge Capture SCK-edge * 0 0 0 Falling Rising diff --git a/Marlin/src/HAL/TEENSY31_32/fastio.h b/Marlin/src/HAL/TEENSY31_32/fastio.h index c564a71835..9a299de9c7 100644 --- a/Marlin/src/HAL/TEENSY31_32/fastio.h +++ b/Marlin/src/HAL/TEENSY31_32/fastio.h @@ -39,7 +39,7 @@ * * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html */ #define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK) diff --git a/Marlin/src/HAL/TEENSY35_36/fastio.h b/Marlin/src/HAL/TEENSY35_36/fastio.h index c564a71835..9a299de9c7 100644 --- a/Marlin/src/HAL/TEENSY35_36/fastio.h +++ b/Marlin/src/HAL/TEENSY35_36/fastio.h @@ -39,7 +39,7 @@ * * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW); * - * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html + * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html */ #define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK) diff --git a/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp b/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp index 207cd56aa8..f524673ecd 100644 --- a/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp +++ b/Marlin/src/HAL/shared/backtrace/unwarmbytab.cpp @@ -4,7 +4,7 @@ * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this - * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * file, You can obtain one at https://mozilla.org/MPL/2.0/. * * This library was modified, some bugs fixed, stack address validated * and adapted to be used in Marlin 3D printer firmware as backtracer diff --git a/Marlin/src/feature/dac/dac_mcp4728.cpp b/Marlin/src/feature/dac/dac_mcp4728.cpp index 90ad31290f..4976b36907 100644 --- a/Marlin/src/feature/dac/dac_mcp4728.cpp +++ b/Marlin/src/feature/dac/dac_mcp4728.cpp @@ -24,7 +24,7 @@ * mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter * * For implementation details, please take a look at the datasheet: - * http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf + * https://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf * * For discussion and feedback, please go to: * https://arduino.cc/forum/index.php/topic,51842.0.html diff --git a/Marlin/src/gcode/motion/G5.cpp b/Marlin/src/gcode/motion/G5.cpp index 804db5a742..35cc428023 100644 --- a/Marlin/src/gcode/motion/G5.cpp +++ b/Marlin/src/gcode/motion/G5.cpp @@ -29,7 +29,7 @@ /** * Parameters interpreted according to: - * http://linuxcnc.org/docs/2.6/html/gcode/parser.html#sec:G5-Cubic-Spline + * https://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G5-Cubic-Spline * However I, J omission is not supported at this point; all * parameters can be omitted and default to zero. */ diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h index e431cfde1f..c09d10f148 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/boards.h @@ -113,9 +113,9 @@ /** * Settings for the 4D Systems, 4.3" Embedded SPI Display 480x272, SPI, FT800 (4DLCD-FT843) - * http://www.4dsystems.com.au/product/4DLCD_FT843/ + * https://4dsystems.com.au/4dlcd-ft843 * Datasheet: - * http://www.4dsystems.com.au/productpages/4DLCD-FT843/downloads/FT843-4.3-Display_datasheet_R_1_2.pdf + * https://4dsystems.com.au/mwdownloads/download/link/id/52/ */ #elif defined(LCD_4DSYSTEMS_4DLCD_FT843) #if !HAS_RESOLUTION @@ -136,9 +136,7 @@ /** * Settings for the Aleph Objects Color LCD User Interface - * https://code.alephobjects.com/source/aotctl/ - * Datasheet: - * http://www.hantronix.com/files/data/s1501799605s500-gh7.pdf + * Datasheet https://www.hantronix.com/files/data/s1501799605s500-gh7.pdf */ #elif defined(LCD_ALEPHOBJECTS_CLCD_UI) #if !HAS_RESOLUTION diff --git a/Marlin/src/module/scara.cpp b/Marlin/src/module/scara.cpp index 6c961827c7..e4b2f0b75c 100644 --- a/Marlin/src/module/scara.cpp +++ b/Marlin/src/module/scara.cpp @@ -100,7 +100,7 @@ void inverse_kinematics(const xyz_pos_t &raw) { /** * Morgan SCARA Inverse Kinematics. Results in 'delta'. * - * See http://forums.reprap.org/read.php?185,283327 + * See https://reprap.org/forum/read.php?185,283327 * * Maths and first version by QHARLEY. * Integrated into Marlin and slightly restructured by Joachim Cerny. diff --git a/Marlin/src/module/thermistor/thermistor_2.h b/Marlin/src/module/thermistor/thermistor_2.h index f07de0b537..d0e1e4f3df 100644 --- a/Marlin/src/module/thermistor/thermistor_2.h +++ b/Marlin/src/module/thermistor/thermistor_2.h @@ -23,7 +23,7 @@ // // R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2 -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance // const temp_entry_t temptable_2[] PROGMEM = { diff --git a/Marlin/src/module/thermistor/thermistor_5.h b/Marlin/src/module/thermistor/thermistor_5.h index 5d2c3e7b04..1d5fa2fec7 100644 --- a/Marlin/src/module/thermistor/thermistor_5.h +++ b/Marlin/src/module/thermistor/thermistor_5.h @@ -24,7 +24,7 @@ // R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up // 100k ParCan thermistor (104GT-2) // ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan) -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf // Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance const temp_entry_t temptable_5[] PROGMEM = { { OV( 1), 713 }, diff --git a/Marlin/src/module/thermistor/thermistor_52.h b/Marlin/src/module/thermistor/thermistor_52.h index 69666add20..5c9cb9dc4d 100644 --- a/Marlin/src/module/thermistor/thermistor_52.h +++ b/Marlin/src/module/thermistor/thermistor_52.h @@ -23,7 +23,7 @@ // R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up, // 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance // Advantage: More resolution and better linearity from 150C to 200C const temp_entry_t temptable_52[] PROGMEM = { diff --git a/Marlin/src/module/thermistor/thermistor_55.h b/Marlin/src/module/thermistor/thermistor_55.h index 2966d064eb..707b7d420a 100644 --- a/Marlin/src/module/thermistor/thermistor_55.h +++ b/Marlin/src/module/thermistor/thermistor_55.h @@ -23,7 +23,7 @@ // R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up, // 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!) -// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf +// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf // Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance // Advantage: More resolution and better linearity from 150C to 200C const temp_entry_t temptable_55[] PROGMEM = { diff --git a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h index dfe077ee4d..7cd81456b1 100644 --- a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h +++ b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h @@ -23,7 +23,7 @@ /** * Alligator Board R2 - * http://www.3dartists.org/ + * https://reprap.org/wiki/Alligator_Board */ #ifndef __SAM3X8E__ diff --git a/Marlin/src/pins/sanguino/pins_OMCA.h b/Marlin/src/pins/sanguino/pins_OMCA.h index eb5786dd11..8e4c6d2b64 100644 --- a/Marlin/src/pins/sanguino/pins_OMCA.h +++ b/Marlin/src/pins/sanguino/pins_OMCA.h @@ -49,7 +49,7 @@ * PWM (D 14) PD6 20| |21 PD7 (D 15) PWM * +--------+ * - * REF http://sanguino.cc/hardware + * REF http://sanguino.wikidot.com/hardware */ /** @@ -70,7 +70,7 @@ * * When installing select 1.0.2 * - * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino + * Installation instructions can be found at http://learn.sparkfun.com/pages/CustomBoardsArduino * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. diff --git a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h index e0e827262f..e6350f71dc 100644 --- a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h +++ b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h @@ -23,7 +23,7 @@ /** * STM32F407VET6 with RAMPS-like shield - * 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407 + * 'Black' STM32F407VET6 board - https://www.stm32duino.com/viewtopic.php?t=485 * Shield - https://github.com/jmz52/Hardware */ diff --git a/Marlin/src/sd/SdFatStructs.h b/Marlin/src/sd/SdFatStructs.h index dc6fb7d263..e06e05981a 100644 --- a/Marlin/src/sd/SdFatStructs.h +++ b/Marlin/src/sd/SdFatStructs.h @@ -39,7 +39,7 @@ /** * mostly from Microsoft document fatgen103.doc - * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx + * https://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx */ uint8_t const BOOTSIG0 = 0x55, // Value for byte 510 of boot block or MBR diff --git a/Marlin/src/sd/SdInfo.h b/Marlin/src/sd/SdInfo.h index 4affa21c50..bfa5a01ae2 100644 --- a/Marlin/src/sd/SdInfo.h +++ b/Marlin/src/sd/SdInfo.h @@ -39,7 +39,7 @@ // Version 3.01 // May 18, 2010 // -// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs +// https://www.sdcard.org/downloads/pls/index.html // SD card commands uint8_t const CMD0 = 0x00, // GO_IDLE_STATE - init card in spi mode if CS low diff --git a/README.md b/README.md index 00ed7e96fd..042cf3303b 100644 --- a/README.md +++ b/README.md @@ -52,8 +52,8 @@ Marlin 2.0 introduces a layer of abstraction so that all the existing high-level boards|processor|speed|flash|sram|logic|fpu ----|---------|-----|-----|----|-----|--- - [Re-ARM](https://www.kickstarter.com/projects/1245051645/re-arm-for-ramps-simple-32-bit-upgrade)|[LPC1768 ARM-Cortex M3](http://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|100MHz|512k|32+16+16k|3.3-5V|no - [MKS SBASE](http://forums.reprap.org/read.php?13,499322)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no + [Re-ARM](https://www.kickstarter.com/projects/1245051645/re-arm-for-ramps-simple-32-bit-upgrade)|[LPC1768 ARM-Cortex M3](https://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|100MHz|512k|32+16+16k|3.3-5V|no + [MKS SBASE](https://reprap.org/forum/read.php?13,499322)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no [Selena Compact](https://github.com/Ales2-k/Selena)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no [Azteeg X5 GT](https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm)|LPC1769 ARM-Cortex M3|120MHz|512k|32+16+16k|3.3-5V|no [Smoothieboard](https://reprap.org/wiki/Smoothieboard)|LPC1769 ARM-Cortex M3|120MHz|512k|64k|3.3-5V|no @@ -75,7 +75,7 @@ Marlin 2.0 introduces a layer of abstraction so that all the existing high-level boards|processor|speed|flash|sram|logic|fpu ----|---------|-----|-----|----|-----|--- - [STEVAL-3DP001V1](https://www.st.com/en/evaluation-tools/steval-3dp001v1.html)|[STM32F401VE Arm-Cortex M4](http://www.st.com/en/microcontrollers/stm32f401ve.html)|84MHz|512k|64+32k|3.3-5V|yes + [STEVAL-3DP001V1](https://www.st.com/en/evaluation-tools/steval-3dp001v1.html)|[STM32F401VE Arm-Cortex M4](https://www.st.com/en/microcontrollers-microprocessors/stm32f401ve.html)|84MHz|512k|64+32k|3.3-5V|yes #### Teensy++ 2.0 @@ -110,12 +110,12 @@ Proposed patches should be submitted as a Pull Request against the ([bugfix-2.0. The current Marlin dev team consists of: - - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA   [Donate](https://www.thinkyhead.com/donate-to-marlin) / Flattr: [![Flattr Scott](http://api.flattr.com/button/flattr-badge-small.png)](https://flattr.com/submit/auto?user_id=thinkyhead&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software) + - Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA   [Donate](https://www.thinkyhead.com/donate-to-marlin) / Flattr: [![Flattr Scott](https://api.flattr.com/button/flattr-badge-small.png)](https://flattr.com/submit/auto?user_id=thinkyhead&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software) - Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] - USA - Chris Pepper [[@p3p](https://github.com/p3p)] - UK - Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA - João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portugal - - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands   [![Flattr Erik](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software) + - Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands   [![Flattr Erik](https://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software) ## License diff --git a/buildroot/etc/udev/rules.d/99-platformio-udev.rules b/buildroot/etc/udev/rules.d/99-platformio-udev.rules index 6daaf922bf..3c829882d1 100644 --- a/buildroot/etc/udev/rules.d/99-platformio-udev.rules +++ b/buildroot/etc/udev/rules.d/99-platformio-udev.rules @@ -4,7 +4,7 @@ # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # -# http://www.apache.org/licenses/LICENSE-2.0 +# https://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, @@ -16,7 +16,7 @@ # # INSTALLATION # -# Please visit > http://docs.platformio.org/en/latest/faq.html#platformio-udev-rules +# Please visit > https://docs.platformio.org/en/latest/faq.html#platformio-udev-rules # ##################################################################################### diff --git a/buildroot/share/PlatformIO/boards/BigTree_Btt002.json b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json index ef3333cbb9..d0d092f1ea 100644 --- a/buildroot/share/PlatformIO/boards/BigTree_Btt002.json +++ b/buildroot/share/PlatformIO/boards/BigTree_Btt002.json @@ -41,6 +41,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/en/microcontrollers/stm32f407vg.html", + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407vg.html", "vendor": "Generic" } diff --git a/buildroot/share/PlatformIO/boards/BigTree_GTR_v1.json b/buildroot/share/PlatformIO/boards/BigTree_GTR_v1.json index 669a7520bb..32236301c3 100644 --- a/buildroot/share/PlatformIO/boards/BigTree_GTR_v1.json +++ b/buildroot/share/PlatformIO/boards/BigTree_GTR_v1.json @@ -41,6 +41,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/en/microcontrollers/stm32f407zg.html", + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407zg.html", "vendor": "Generic" } diff --git a/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json b/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json index 357b3acca9..211ceacdca 100644 --- a/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json +++ b/buildroot/share/PlatformIO/boards/BigTree_SKR_Pro.json @@ -41,6 +41,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/en/microcontrollers/stm32f407zg.html", + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407zg.html", "vendor": "Generic" } diff --git a/buildroot/share/PlatformIO/boards/CHITU_F103.json b/buildroot/share/PlatformIO/boards/CHITU_F103.json index ab772aea07..ecf7bff66c 100644 --- a/buildroot/share/PlatformIO/boards/CHITU_F103.json +++ b/buildroot/share/PlatformIO/boards/CHITU_F103.json @@ -43,6 +43,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/en/microcontrollers/stm32f103ze.html", + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f103ze.html", "vendor": "Generic" } diff --git a/buildroot/share/PlatformIO/boards/FLYF407ZG.json b/buildroot/share/PlatformIO/boards/FLYF407ZG.json index 060b50ee8c..7e585c5057 100644 --- a/buildroot/share/PlatformIO/boards/FLYF407ZG.json +++ b/buildroot/share/PlatformIO/boards/FLYF407ZG.json @@ -59,6 +59,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html", + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ZG.html", "vendor": "Generic" } diff --git a/buildroot/share/PlatformIO/boards/LERDGE.json b/buildroot/share/PlatformIO/boards/LERDGE.json index b3e4ca44fa..21df8db48e 100644 --- a/buildroot/share/PlatformIO/boards/LERDGE.json +++ b/buildroot/share/PlatformIO/boards/LERDGE.json @@ -59,6 +59,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html", + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ZG.html", "vendor": "Generic" } diff --git a/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json b/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json index 1778ddaaf0..1765634086 100644 --- a/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json +++ b/buildroot/share/PlatformIO/boards/blackSTM32F407VET6.json @@ -59,6 +59,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/en/microcontrollers/stm32f407ve.html", + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ve.html", "vendor": "Generic" } diff --git a/buildroot/share/PlatformIO/boards/malyanM200.json b/buildroot/share/PlatformIO/boards/malyanM200.json index bd783fe899..4dbf760774 100644 --- a/buildroot/share/PlatformIO/boards/malyanM200.json +++ b/buildroot/share/PlatformIO/boards/malyanM200.json @@ -30,6 +30,6 @@ "use_1200bps_touch": false, "wait_for_upload_port": false }, - "url": "http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html", + "url": "https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html", "vendor": "Generic" } diff --git a/buildroot/share/fonts/README.md b/buildroot/share/fonts/README.md index f8f780661f..cc09b52810 100644 --- a/buildroot/share/fonts/README.md +++ b/buildroot/share/fonts/README.md @@ -5,7 +5,7 @@ The original author of the following font files is [A. Hardtung](https://github.com/AnHardt). Any copyright is dedicated to the Public Domain. -http://creativecommons.org/publicdomain/zero/1.0/ +https://creativecommons.org/publicdomain/zero/1.0/ - HD44780_C.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) - HD44780_J.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a)) @@ -20,4 +20,4 @@ Additional changes to the original font files distributed with Marlin are copyri ## Documentation -For detailed information about [adding new fonts](http://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website. +For detailed information about [adding new fonts](https://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website. diff --git a/buildroot/share/fonts/uxggenpages.md b/buildroot/share/fonts/uxggenpages.md index c2d94735c7..5e40c392f7 100644 --- a/buildroot/share/fonts/uxggenpages.md +++ b/buildroot/share/fonts/uxggenpages.md @@ -99,11 +99,11 @@ At this time, the font file `marlin-6x12-3.bdf` is used to generate the font dat - [WQY](http://wenq.org/) - [WQY 9pt bitmap font](http://wenq.org/daily/wqy-bitmapfont-bdf-gb18030-nightly_build.tar.gz) -- [unifont (16x8 or 16x16)](http://unifoundry.com/unifont.html) +- [unifont (16x8 or 16x16)](https://unifoundry.com/unifont.html) Documents related to the old version of the language engine: -- [Marlin Fonts Documentation](http://www.marlinfw.org/docs/development/fonts.html) +- [Marlin Fonts Documentation](https://www.marlinfw.org/docs/development/fonts.html) - [Marlin LCD Language](https://marlinfw.org/docs/development/lcd_language.html) - [U8GLIB](https://github.com/olikraus/u8glib.git) - [UTF-8 for U8GLIB](https://github.com/yhfudev/u8glib-fontutf8.git) diff --git a/buildroot/share/scripts/createTemperatureLookupMarlin.py b/buildroot/share/scripts/createTemperatureLookupMarlin.py index 03450bc0e0..b2d8964f55 100755 --- a/buildroot/share/scripts/createTemperatureLookupMarlin.py +++ b/buildroot/share/scripts/createTemperatureLookupMarlin.py @@ -2,10 +2,10 @@ """Thermistor Value Lookup Table Generator Generates lookup to temperature values for use in a microcontroller in C format based on: -http://en.wikipedia.org/wiki/Steinhart-Hart_equation +https://en.wikipedia.org/wiki/Steinhart-Hart_equation The main use is for Arduino programs that read data from the circuit board described here: -http://reprap.org/wiki/Temperature_Sensor_v2.0 +https://reprap.org/wiki/Temperature_Sensor_v2.0 Usage: python createTemperatureLookupMarlin.py [options] diff --git a/buildroot/share/vscode/avrdude.conf b/buildroot/share/vscode/avrdude.conf index 1194847f77..10b39a27d2 100644 --- a/buildroot/share/vscode/avrdude.conf +++ b/buildroot/share/vscode/avrdude.conf @@ -147,7 +147,7 @@ # This flag was added to work around a problem with the # at90s4433/2333's; see the at90s4433 errata at: # -# http://www.atmel.com/atmel/acrobat/doc1280.pdf +# https://www.atmel.com/atmel/acrobat/doc1280.pdf # # INSTRUCTION FORMATS # @@ -184,7 +184,7 @@ # section avr061.zip which accompanies the application note # AVR061 available from: # -# http://www.atmel.com/atmel/acrobat/doc2525.pdf +# https://www.atmel.com/atmel/acrobat/doc2525.pdf # #define ATTINY10 0x10 /* the _old_ one that never existed! */ @@ -416,13 +416,13 @@ programmer programmer id = "usbasp"; - desc = "USBasp, http://www.fischl.de/usbasp/"; + desc = "USBasp, https://www.fischl.de/usbasp/"; type = usbasp; ; programmer id = "usbtiny"; - desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/"; + desc = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/"; type = usbtiny; ; @@ -596,7 +596,7 @@ programmer programmer id = "bsd"; - desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/"; + desc = "Brian Dean's Programmer, https://www.bsdhome.com/avrdude/"; type = par; vcc = 2, 3, 4, 5; reset = 7; @@ -655,7 +655,7 @@ programmer programmer id = "alf"; - desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/"; + desc = "Nightshade ALF-PgmAVR, https://nightshade.homeip.net/"; type = par; vcc = 2, 3, 4, 5; buff = 6; @@ -682,7 +682,7 @@ programmer programmer id = "picoweb"; - desc = "Picoweb Programming Cable, http://www.picoweb.net/"; + desc = "Picoweb Programming Cable, https://www.picoweb.net/"; type = par; reset = 2; sck = 3; @@ -743,7 +743,7 @@ programmer programmer id = "atisp"; - desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th"; + desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th"; type = par; reset = ~6; sck = ~8; @@ -753,7 +753,7 @@ programmer programmer id = "ere-isp-avr"; - desc = "ERE ISP-AVR "; + desc = "ERE ISP-AVR "; type = par; reset = ~4; sck = 3; @@ -773,7 +773,7 @@ programmer ; # It is almost same as pony-stk200, except vcc on pin 5 to auto -# disconnect port (download on http://electropol.free.fr) +# disconnect port (download on https://electropol.free.fr) programmer id = "frank-stk200"; desc = "Frank STK200"; @@ -787,7 +787,7 @@ programmer ; # The AT98ISP Cable is a simple parallel dongle for AT89 family. -# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877 +# https://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877 programmer id = "89isp"; desc = "Atmel at89isp cable"; @@ -836,7 +836,7 @@ programmer programmer id = "siprog"; - desc = "Lancos SI-Prog "; + desc = "Lancos SI-Prog "; type = serbb; reset = ~3; sck = 7; diff --git a/buildroot/share/vscode/avrdude_linux.conf b/buildroot/share/vscode/avrdude_linux.conf index 46e7ace34b..b1eca4e319 100644 --- a/buildroot/share/vscode/avrdude_linux.conf +++ b/buildroot/share/vscode/avrdude_linux.conf @@ -147,7 +147,7 @@ # This flag was added to work around a problem with the # at90s4433/2333's; see the at90s4433 errata at: # -# http://www.atmel.com/atmel/acrobat/doc1280.pdf +# https://www.atmel.com/atmel/acrobat/doc1280.pdf # # INSTRUCTION FORMATS # @@ -184,7 +184,7 @@ # section avr061.zip which accompanies the application note # AVR061 available from: # -# http://www.atmel.com/atmel/acrobat/doc2525.pdf +# https://www.atmel.com/atmel/acrobat/doc2525.pdf # #define ATTINY10 0x10 /* the _old_ one that never existed! */ @@ -416,13 +416,13 @@ programmer programmer id = "usbasp"; - desc = "USBasp, http://www.fischl.de/usbasp/"; + desc = "USBasp, https://www.fischl.de/usbasp/"; type = usbasp; ; programmer id = "usbtiny"; - desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/"; + desc = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/"; type = usbtiny; ; @@ -596,7 +596,7 @@ programmer programmer id = "bsd"; - desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/"; + desc = "Brian Dean's Programmer, https://www.bsdhome.com/avrdude/"; type = par; vcc = 2, 3, 4, 5; reset = 7; @@ -655,7 +655,7 @@ programmer programmer id = "alf"; - desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/"; + desc = "Nightshade ALF-PgmAVR, https://nightshade.homeip.net/"; type = par; vcc = 2, 3, 4, 5; buff = 6; @@ -682,7 +682,7 @@ programmer programmer id = "picoweb"; - desc = "Picoweb Programming Cable, http://www.picoweb.net/"; + desc = "Picoweb Programming Cable, https://www.picoweb.net/"; type = par; reset = 2; sck = 3; @@ -743,7 +743,7 @@ programmer programmer id = "atisp"; - desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th"; + desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from micro-research.co.th"; type = par; reset = ~6; sck = ~8; @@ -753,7 +753,7 @@ programmer programmer id = "ere-isp-avr"; - desc = "ERE ISP-AVR "; + desc = "ERE ISP-AVR "; type = par; reset = ~4; sck = 3; @@ -773,7 +773,7 @@ programmer ; # It is almost same as pony-stk200, except vcc on pin 5 to auto -# disconnect port (download on http://electropol.free.fr) +# disconnect port (download on https://electropol.free.fr) programmer id = "frank-stk200"; desc = "Frank STK200"; @@ -787,7 +787,7 @@ programmer ; # The AT98ISP Cable is a simple parallel dongle for AT89 family. -# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877 +# https://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877 programmer id = "89isp"; desc = "Atmel at89isp cable"; @@ -836,7 +836,7 @@ programmer programmer id = "siprog"; - desc = "Lancos SI-Prog "; + desc = "Lancos SI-Prog "; type = serbb; reset = ~3; sck = 7; diff --git a/buildroot/share/vscode/avrdude_macOS.conf b/buildroot/share/vscode/avrdude_macOS.conf index d933567452..2212ab46e7 100644 --- a/buildroot/share/vscode/avrdude_macOS.conf +++ b/buildroot/share/vscode/avrdude_macOS.conf @@ -147,7 +147,7 @@ # This flag was added to work around a problem with the # at90s4433/2333's; see the at90s4433 errata at: # -# http://www.atmel.com/atmel/acrobat/doc1280.pdf +# https://www.atmel.com/atmel/acrobat/doc1280.pdf # # INSTRUCTION FORMATS # @@ -184,7 +184,7 @@ # section avr061.zip which accompanies the application note # AVR061 available from: # -# http://www.atmel.com/atmel/acrobat/doc2525.pdf +# https://www.atmel.com/atmel/acrobat/doc2525.pdf # #define ATTINY10 0x10 /* the _old_ one that never existed! */ @@ -416,13 +416,13 @@ programmer programmer id = "usbasp"; - desc = "USBasp, http://www.fischl.de/usbasp/"; + desc = "USBasp, https://www.fischl.de/usbasp/"; type = usbasp; ; programmer id = "usbtiny"; - desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/"; + desc = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/"; type = usbtiny; ; @@ -630,7 +630,7 @@ programmer programmer id = "siprog"; - desc = "Lancos SI-Prog "; + desc = "Lancos SI-Prog "; type = serbb; reset = ~3; sck = 7; diff --git a/platformio.ini b/platformio.ini index 246abc11bd..edc027a6d3 100644 --- a/platformio.ini +++ b/platformio.ini @@ -769,7 +769,7 @@ upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE" # # STM32F407VET6 with RAMPS-like shield -# 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407 +# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407 # Shield - https://github.com/jmz52/Hardware # [env:STM32F407VE_black]