Update links, README, contributing, etc.
This commit is contained in:
Scott Lahteine
parent
715271190c
commit
d1e20eb29f
2
.github/FUNDING.yml
vendored
2
.github/FUNDING.yml
vendored
|
|
@ -1,3 +1,3 @@
|
|||
github: [thinkyhead]
|
||||
patreon: thinkyhead
|
||||
custom: ["http://www.thinkyhead.com/donate-to-marlin"]
|
||||
custom: ["https://www.thinkyhead.com/donate-to-marlin"]
|
||||
|
|
|
|||
11
.github/contributing.md
vendored
11
.github/contributing.md
vendored
|
|
@ -34,16 +34,15 @@ This project and everyone participating in it is governed by the [Marlin Code of
|
|||
|
||||
We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
|
||||
|
||||
* [Marlin RepRap forum](http://forums.reprap.org/list.php?415)
|
||||
* [Marlin RepRap forum](https://reprap.org/forum/list.php?415)
|
||||
* [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)
|
||||
|
||||
If chat is more your speed, you can join the MarlinFirmware Slack team:
|
||||
If chat is more your speed, you can join the MarlinFirmware Discord server:
|
||||
|
||||
* Join the Marlin Slack Team
|
||||
* To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead.
|
||||
* Even though Slack is a chat service, sometimes it takes several hours for community members to respond — please be patient!
|
||||
* Use the link https://discord.gg/n5NJ59y to join up as a General User.
|
||||
* Even though our Discord is pretty active, it may take a while for community members to respond — please be patient!
|
||||
* Use the `#general` channel for general questions or discussion about Marlin.
|
||||
* Other channels exist for certain topics. Check the channel list.
|
||||
* Other channels exist for certain topics or are limited to Patrons. Check the channel list.
|
||||
|
||||
## How Can I Contribute?
|
||||
|
||||
|
|
|
|||
8
.github/issue_template.md
vendored
8
.github/issue_template.md
vendored
|
|
@ -2,9 +2,13 @@
|
|||
|
||||
Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md
|
||||
|
||||
Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.
|
||||
Do you want to ask a question? Are you looking for support? Please don't post here. Instead use one of the following options:
|
||||
|
||||
Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.
|
||||
- The Marlin Firmware forum at https://reprap.org/forum/list.php?415
|
||||
- The MarlinFirmware Facebook Group at https://www.facebook.com/groups/1049718498464482/
|
||||
- The MarlinFirmware Discord Server at https://discord.gg/n5NJ59y.
|
||||
|
||||
Before filing an issue be sure to test the latest "bugfix" branch to see whether the issue is already addressed.
|
||||
|
||||
-->
|
||||
|
||||
|
|
|
|||
|
|
@ -473,7 +473,7 @@
|
|||
//===========================================================================
|
||||
//============================= PID Settings ================================
|
||||
//===========================================================================
|
||||
// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
|
||||
// PID Tuning Guide here: https://reprap.org/wiki/PID_Tuning
|
||||
|
||||
// Comment the following line to disable PID and enable bang-bang.
|
||||
#define PIDTEMP
|
||||
|
|
|
|||
|
|
@ -37,7 +37,7 @@ Configuration
|
|||
|
||||
Getting Help
|
||||
|
||||
- http://forums.reprap.org/list.php?415
|
||||
- https://reprap.org/forum/list.php?415
|
||||
The Marlin Discussion Forum is a great place to get help from other Marlin
|
||||
users who may have experienced similar issues to your own.
|
||||
|
||||
|
|
|
|||
|
|
@ -57,7 +57,7 @@
|
|||
*
|
||||
* Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
|
||||
*
|
||||
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
|
||||
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
|
||||
*/
|
||||
|
||||
#define _READ(IO) TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN)
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@
|
|||
|
||||
/**
|
||||
* Description: Tone function for Arduino Due and compatible (SAM3X8E)
|
||||
* Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
|
||||
* Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
|
||||
*/
|
||||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
|
|
|||
|
|
@ -58,7 +58,7 @@
|
|||
*
|
||||
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
|
||||
*
|
||||
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
|
||||
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
|
||||
*/
|
||||
|
||||
// Read a pin
|
||||
|
|
|
|||
|
|
@ -43,7 +43,7 @@
|
|||
#pragma once
|
||||
|
||||
/**
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
/**
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef UTILS_COMPILER_H
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _CONF_ACCESS_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef CONF_CLOCK_H_INCLUDED
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _CONF_USB_H_
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@
|
|||
*
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@
|
|||
*
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef CHIP_GENCLK_H_INCLUDED
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _MREPEAT_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef CHIP_OSC_H_INCLUDED
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef CHIP_PLL_H_INCLUDED
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _PREPROCESSOR_H_
|
||||
|
|
|
|||
|
|
@ -52,7 +52,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
#ifndef _SBC_PROTOCOL_H_
|
||||
#define _SBC_PROTOCOL_H_
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@
|
|||
*
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -45,7 +45,7 @@
|
|||
*/
|
||||
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
#ifndef _SPC_PROTOCOL_H_
|
||||
#define _SPC_PROTOCOL_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _STRINGZ_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef CHIP_SYSCLK_H_INCLUDED
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _TPASTE_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _UDC_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _UDC_DESC_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _UDD_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _UDI_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _UDI_CDC_H_
|
||||
|
|
@ -701,7 +701,7 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
|
|||
* another "Composite Device" module, like "USB HID Mouse (Composite Device)".
|
||||
*
|
||||
* Also, you can refer to application note
|
||||
* <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
|
||||
* <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
|
||||
* AVR4902 ASF - USB Composite Device</A>.
|
||||
*
|
||||
* \section udi_cdc_use_case_composite_setup Setup steps
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _UDI_CDC_CONF_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _UDI_MSC_H_
|
||||
|
|
@ -290,7 +290,7 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
|
|||
* another "Composite Device" module, like "USB HID Mouse (Composite Device)".
|
||||
*
|
||||
* Also, you can refer to application note
|
||||
* <A href="http://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
|
||||
* <A href="https://www.atmel.com/dyn/resources/prod_documents/doc8445.pdf">
|
||||
* AVR4902 ASF - USB Composite Device</A>.
|
||||
*
|
||||
* \section udi_msc_use_case_composite_setup Setup steps
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@
|
|||
*/
|
||||
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef UOTGHS_DEVICE_DUE_H_INCLUDED
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef UOTGHS_OTG_H_INCLUDED
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _USB_PROTOCOL_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
#ifndef _USB_PROTOCOL_CDC_H_
|
||||
#define _USB_PROTOCOL_CDC_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _USB_PROTOCOL_MSC_H_
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
|
||||
// Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
// Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
|
||||
#ifdef ARDUINO_ARCH_SAM
|
||||
|
||||
|
|
|
|||
|
|
@ -41,7 +41,7 @@
|
|||
*
|
||||
*/
|
||||
/*
|
||||
* Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
|
||||
* Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
|
||||
*/
|
||||
|
||||
#ifndef _USB_TASK_H_
|
||||
|
|
|
|||
|
|
@ -44,7 +44,7 @@
|
|||
*
|
||||
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
|
||||
*
|
||||
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
|
||||
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
|
||||
*/
|
||||
|
||||
/// Read a pin
|
||||
|
|
|
|||
|
|
@ -56,7 +56,7 @@
|
|||
*
|
||||
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
|
||||
*
|
||||
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
|
||||
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
|
||||
*/
|
||||
|
||||
/// Read a pin
|
||||
|
|
|
|||
|
|
@ -216,7 +216,7 @@ void SPIClass::setDataMode(uint8_t dataMode) {
|
|||
/**
|
||||
* Notes:
|
||||
* As far as we know the AVR numbers for dataMode match the numbers required by the STM32.
|
||||
* From the AVR doc http://www.atmel.com/images/doc2585.pdf section 2.4
|
||||
* From the AVR doc https://www.atmel.com/images/doc2585.pdf section 2.4
|
||||
*
|
||||
* SPI Mode CPOL CPHA Shift SCK-edge Capture SCK-edge
|
||||
* 0 0 0 Falling Rising
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@
|
|||
*
|
||||
* Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
|
||||
*
|
||||
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
|
||||
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
|
||||
*/
|
||||
|
||||
#define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK)
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@
|
|||
*
|
||||
* Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
|
||||
*
|
||||
* Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
|
||||
* Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
|
||||
*/
|
||||
|
||||
#define _READ(P) bool(CORE_PIN ## P ## _PINREG & CORE_PIN ## P ## _BITMASK)
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@
|
|||
*
|
||||
* This Source Code Form is subject to the terms of the Mozilla Public
|
||||
* License, v. 2.0. If a copy of the MPL was not distributed with this
|
||||
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
|
||||
* file, You can obtain one at https://mozilla.org/MPL/2.0/.
|
||||
*
|
||||
* This library was modified, some bugs fixed, stack address validated
|
||||
* and adapted to be used in Marlin 3D printer firmware as backtracer
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@
|
|||
* mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter
|
||||
*
|
||||
* For implementation details, please take a look at the datasheet:
|
||||
* http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
|
||||
* https://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
|
||||
*
|
||||
* For discussion and feedback, please go to:
|
||||
* https://arduino.cc/forum/index.php/topic,51842.0.html
|
||||
|
|
|
|||
|
|
@ -29,7 +29,7 @@
|
|||
|
||||
/**
|
||||
* Parameters interpreted according to:
|
||||
* http://linuxcnc.org/docs/2.6/html/gcode/parser.html#sec:G5-Cubic-Spline
|
||||
* https://linuxcnc.org/docs/2.6/html/gcode/gcode.html#sec:G5-Cubic-Spline
|
||||
* However I, J omission is not supported at this point; all
|
||||
* parameters can be omitted and default to zero.
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -113,9 +113,9 @@
|
|||
|
||||
/**
|
||||
* Settings for the 4D Systems, 4.3" Embedded SPI Display 480x272, SPI, FT800 (4DLCD-FT843)
|
||||
* http://www.4dsystems.com.au/product/4DLCD_FT843/
|
||||
* https://4dsystems.com.au/4dlcd-ft843
|
||||
* Datasheet:
|
||||
* http://www.4dsystems.com.au/productpages/4DLCD-FT843/downloads/FT843-4.3-Display_datasheet_R_1_2.pdf
|
||||
* https://4dsystems.com.au/mwdownloads/download/link/id/52/
|
||||
*/
|
||||
#elif defined(LCD_4DSYSTEMS_4DLCD_FT843)
|
||||
#if !HAS_RESOLUTION
|
||||
|
|
@ -136,9 +136,7 @@
|
|||
|
||||
/**
|
||||
* Settings for the Aleph Objects Color LCD User Interface
|
||||
* https://code.alephobjects.com/source/aotctl/
|
||||
* Datasheet:
|
||||
* http://www.hantronix.com/files/data/s1501799605s500-gh7.pdf
|
||||
* Datasheet https://www.hantronix.com/files/data/s1501799605s500-gh7.pdf
|
||||
*/
|
||||
#elif defined(LCD_ALEPHOBJECTS_CLCD_UI)
|
||||
#if !HAS_RESOLUTION
|
||||
|
|
|
|||
|
|
@ -100,7 +100,7 @@ void inverse_kinematics(const xyz_pos_t &raw) {
|
|||
/**
|
||||
* Morgan SCARA Inverse Kinematics. Results in 'delta'.
|
||||
*
|
||||
* See http://forums.reprap.org/read.php?185,283327
|
||||
* See https://reprap.org/forum/read.php?185,283327
|
||||
*
|
||||
* Maths and first version by QHARLEY.
|
||||
* Integrated into Marlin and slightly restructured by Joachim Cerny.
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@
|
|||
|
||||
//
|
||||
// R25 = 200 kOhm, beta25 = 4338 K, 4.7 kOhm pull-up, ATC Semitec 204GT-2
|
||||
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||
// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
|
||||
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||
//
|
||||
const temp_entry_t temptable_2[] PROGMEM = {
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@
|
|||
// R25 = 100 kOhm, beta25 = 4267 K, 4.7 kOhm pull-up
|
||||
// 100k ParCan thermistor (104GT-2)
|
||||
// ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan)
|
||||
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||
// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
|
||||
// Calculated using 4.7kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||
const temp_entry_t temptable_5[] PROGMEM = {
|
||||
{ OV( 1), 713 },
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@
|
|||
|
||||
// R25 = 200 kOhm, beta25 = 4338 K, 1 kOhm pull-up,
|
||||
// 200k ATC Semitec 204GT-2 (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
||||
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||
// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
|
||||
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||
// Advantage: More resolution and better linearity from 150C to 200C
|
||||
const temp_entry_t temptable_52[] PROGMEM = {
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@
|
|||
|
||||
// R25 = 100 kOhm, beta25 = 4267 K, 1 kOhm pull-up,
|
||||
// 100k ATC Semitec 104GT-2 (Used on ParCan) (WITH 1kohm RESISTOR FOR PULLUP, R9 ON SANGUINOLOLU! NOT FOR 4.7kohm PULLUP! THIS IS NOT NORMAL!)
|
||||
// Verified by linagee. Source: http://shop.arcol.hu/static/datasheets/thermistors.pdf
|
||||
// Verified by linagee. Source: https://www.mouser.com/datasheet/2/362/semitec%20usa%20corporation_gtthermistor-1202937.pdf
|
||||
// Calculated using 1kohm pullup, voltage divider math, and manufacturer provided temp/resistance
|
||||
// Advantage: More resolution and better linearity from 150C to 200C
|
||||
const temp_entry_t temptable_55[] PROGMEM = {
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@
|
|||
|
||||
/**
|
||||
* Alligator Board R2
|
||||
* http://www.3dartists.org/
|
||||
* https://reprap.org/wiki/Alligator_Board
|
||||
*/
|
||||
|
||||
#ifndef __SAM3X8E__
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@
|
|||
* PWM (D 14) PD6 20| |21 PD7 (D 15) PWM
|
||||
* +--------+
|
||||
*
|
||||
* REF http://sanguino.cc/hardware
|
||||
* REF http://sanguino.wikidot.com/hardware
|
||||
*/
|
||||
|
||||
/**
|
||||
|
|
@ -70,7 +70,7 @@
|
|||
*
|
||||
* When installing select 1.0.2
|
||||
*
|
||||
* Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
|
||||
* Installation instructions can be found at http://learn.sparkfun.com/pages/CustomBoardsArduino
|
||||
* Just use the above JSON URL instead of Sparkfun's JSON.
|
||||
*
|
||||
* Once installed select the Sanguino board and then select the CPU.
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@
|
|||
|
||||
/**
|
||||
* STM32F407VET6 with RAMPS-like shield
|
||||
* 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
|
||||
* 'Black' STM32F407VET6 board - https://www.stm32duino.com/viewtopic.php?t=485
|
||||
* Shield - https://github.com/jmz52/Hardware
|
||||
*/
|
||||
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@
|
|||
|
||||
/**
|
||||
* mostly from Microsoft document fatgen103.doc
|
||||
* http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
|
||||
* https://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
|
||||
*/
|
||||
|
||||
uint8_t const BOOTSIG0 = 0x55, // Value for byte 510 of boot block or MBR
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@
|
|||
// Version 3.01
|
||||
// May 18, 2010
|
||||
//
|
||||
// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs
|
||||
// https://www.sdcard.org/downloads/pls/index.html
|
||||
|
||||
// SD card commands
|
||||
uint8_t const CMD0 = 0x00, // GO_IDLE_STATE - init card in spi mode if CS low
|
||||
|
|
|
|||
10
README.md
10
README.md
|
|
@ -52,8 +52,8 @@ Marlin 2.0 introduces a layer of abstraction so that all the existing high-level
|
|||
|
||||
boards|processor|speed|flash|sram|logic|fpu
|
||||
----|---------|-----|-----|----|-----|---
|
||||
[Re-ARM](https://www.kickstarter.com/projects/1245051645/re-arm-for-ramps-simple-32-bit-upgrade)|[LPC1768 ARM-Cortex M3](http://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|100MHz|512k|32+16+16k|3.3-5V|no
|
||||
[MKS SBASE](http://forums.reprap.org/read.php?13,499322)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
|
||||
[Re-ARM](https://www.kickstarter.com/projects/1245051645/re-arm-for-ramps-simple-32-bit-upgrade)|[LPC1768 ARM-Cortex M3](https://www.nxp.com/products/microcontrollers-and-processors/arm-based-processors-and-mcus/lpc-cortex-m-mcus/lpc1700-cortex-m3/512kb-flash-64kb-sram-ethernet-usb-lqfp100-package:LPC1768FBD100)|100MHz|512k|32+16+16k|3.3-5V|no
|
||||
[MKS SBASE](https://reprap.org/forum/read.php?13,499322)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
|
||||
[Selena Compact](https://github.com/Ales2-k/Selena)|LPC1768 ARM-Cortex M3|100MHz|512k|32+16+16k|3.3-5V|no
|
||||
[Azteeg X5 GT](https://www.panucatt.com/azteeg_X5_GT_reprap_3d_printer_controller_p/ax5gt.htm)|LPC1769 ARM-Cortex M3|120MHz|512k|32+16+16k|3.3-5V|no
|
||||
[Smoothieboard](https://reprap.org/wiki/Smoothieboard)|LPC1769 ARM-Cortex M3|120MHz|512k|64k|3.3-5V|no
|
||||
|
|
@ -75,7 +75,7 @@ Marlin 2.0 introduces a layer of abstraction so that all the existing high-level
|
|||
|
||||
boards|processor|speed|flash|sram|logic|fpu
|
||||
----|---------|-----|-----|----|-----|---
|
||||
[STEVAL-3DP001V1](https://www.st.com/en/evaluation-tools/steval-3dp001v1.html)|[STM32F401VE Arm-Cortex M4](http://www.st.com/en/microcontrollers/stm32f401ve.html)|84MHz|512k|64+32k|3.3-5V|yes
|
||||
[STEVAL-3DP001V1](https://www.st.com/en/evaluation-tools/steval-3dp001v1.html)|[STM32F401VE Arm-Cortex M4](https://www.st.com/en/microcontrollers-microprocessors/stm32f401ve.html)|84MHz|512k|64+32k|3.3-5V|yes
|
||||
|
||||
#### Teensy++ 2.0
|
||||
|
||||
|
|
@ -110,12 +110,12 @@ Proposed patches should be submitted as a Pull Request against the ([bugfix-2.0.
|
|||
|
||||
The current Marlin dev team consists of:
|
||||
|
||||
- Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA [Donate](https://www.thinkyhead.com/donate-to-marlin) / Flattr: [](https://flattr.com/submit/auto?user_id=thinkyhead&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
|
||||
- Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA [Donate](https://www.thinkyhead.com/donate-to-marlin) / Flattr: [](https://flattr.com/submit/auto?user_id=thinkyhead&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
|
||||
- Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] - USA
|
||||
- Chris Pepper [[@p3p](https://github.com/p3p)] - UK
|
||||
- Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA
|
||||
- João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portugal
|
||||
- Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands [](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
|
||||
- Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands [](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
|
||||
|
||||
## License
|
||||
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@
|
|||
# you may not use this file except in compliance with the License.
|
||||
# You may obtain a copy of the License at
|
||||
#
|
||||
# http://www.apache.org/licenses/LICENSE-2.0
|
||||
# https://www.apache.org/licenses/LICENSE-2.0
|
||||
#
|
||||
# Unless required by applicable law or agreed to in writing, software
|
||||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||||
|
|
@ -16,7 +16,7 @@
|
|||
#
|
||||
# INSTALLATION
|
||||
#
|
||||
# Please visit > http://docs.platformio.org/en/latest/faq.html#platformio-udev-rules
|
||||
# Please visit > https://docs.platformio.org/en/latest/faq.html#platformio-udev-rules
|
||||
#
|
||||
#####################################################################################
|
||||
|
||||
|
|
|
|||
|
|
@ -41,6 +41,6 @@
|
|||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "http://www.st.com/en/microcontrollers/stm32f407vg.html",
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407vg.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -41,6 +41,6 @@
|
|||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "http://www.st.com/en/microcontrollers/stm32f407zg.html",
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407zg.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -41,6 +41,6 @@
|
|||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "http://www.st.com/en/microcontrollers/stm32f407zg.html",
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407zg.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -43,6 +43,6 @@
|
|||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "http://www.st.com/en/microcontrollers/stm32f103ze.html",
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f103ze.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -59,6 +59,6 @@
|
|||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html",
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ZG.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -59,6 +59,6 @@
|
|||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html",
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ZG.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -59,6 +59,6 @@
|
|||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "http://www.st.com/en/microcontrollers/stm32f407ve.html",
|
||||
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f407ve.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -30,6 +30,6 @@
|
|||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "http://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html",
|
||||
"url": "https://www.st.com/content/st_com/en/products/microcontrollers/stm32-32-bit-arm-cortex-mcus/stm32f1-series/stm32f103/stm32f103cb.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
|
|
|
|||
|
|
@ -5,7 +5,7 @@
|
|||
The original author of the following font files is [A. Hardtung](https://github.com/AnHardt).
|
||||
|
||||
Any copyright is dedicated to the Public Domain.
|
||||
http://creativecommons.org/publicdomain/zero/1.0/
|
||||
https://creativecommons.org/publicdomain/zero/1.0/
|
||||
|
||||
- HD44780_C.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a))
|
||||
- HD44780_J.fon ([fe2bd23](https://github.com/MarlinFirmware/Marlin/commit/fe2bd237d556439499dfdee852c1550c7a16430a))
|
||||
|
|
@ -20,4 +20,4 @@ Additional changes to the original font files distributed with Marlin are copyri
|
|||
|
||||
|
||||
## Documentation
|
||||
For detailed information about [adding new fonts](http://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website.
|
||||
For detailed information about [adding new fonts](https://www.marlinfw.org/docs/development/fonts.html) to Marlin visit our documentation website.
|
||||
|
|
|
|||
|
|
@ -99,11 +99,11 @@ At this time, the font file `marlin-6x12-3.bdf` is used to generate the font dat
|
|||
|
||||
- [WQY](http://wenq.org/)
|
||||
- [WQY 9pt bitmap font](http://wenq.org/daily/wqy-bitmapfont-bdf-gb18030-nightly_build.tar.gz)
|
||||
- [unifont (16x8 or 16x16)](http://unifoundry.com/unifont.html)
|
||||
- [unifont (16x8 or 16x16)](https://unifoundry.com/unifont.html)
|
||||
|
||||
Documents related to the old version of the language engine:
|
||||
|
||||
- [Marlin Fonts Documentation](http://www.marlinfw.org/docs/development/fonts.html)
|
||||
- [Marlin Fonts Documentation](https://www.marlinfw.org/docs/development/fonts.html)
|
||||
- [Marlin LCD Language](https://marlinfw.org/docs/development/lcd_language.html)
|
||||
- [U8GLIB](https://github.com/olikraus/u8glib.git)
|
||||
- [UTF-8 for U8GLIB](https://github.com/yhfudev/u8glib-fontutf8.git)
|
||||
|
|
|
|||
|
|
@ -2,10 +2,10 @@
|
|||
"""Thermistor Value Lookup Table Generator
|
||||
|
||||
Generates lookup to temperature values for use in a microcontroller in C format based on:
|
||||
http://en.wikipedia.org/wiki/Steinhart-Hart_equation
|
||||
https://en.wikipedia.org/wiki/Steinhart-Hart_equation
|
||||
|
||||
The main use is for Arduino programs that read data from the circuit board described here:
|
||||
http://reprap.org/wiki/Temperature_Sensor_v2.0
|
||||
https://reprap.org/wiki/Temperature_Sensor_v2.0
|
||||
|
||||
Usage: python createTemperatureLookupMarlin.py [options]
|
||||
|
||||
|
|
|
|||
|
|
@ -147,7 +147,7 @@
|
|||
# This flag was added to work around a problem with the
|
||||
# at90s4433/2333's; see the at90s4433 errata at:
|
||||
#
|
||||
# http://www.atmel.com/atmel/acrobat/doc1280.pdf
|
||||
# https://www.atmel.com/atmel/acrobat/doc1280.pdf
|
||||
#
|
||||
# INSTRUCTION FORMATS
|
||||
#
|
||||
|
|
@ -184,7 +184,7 @@
|
|||
# section avr061.zip which accompanies the application note
|
||||
# AVR061 available from:
|
||||
#
|
||||
# http://www.atmel.com/atmel/acrobat/doc2525.pdf
|
||||
# https://www.atmel.com/atmel/acrobat/doc2525.pdf
|
||||
#
|
||||
|
||||
#define ATTINY10 0x10 /* the _old_ one that never existed! */
|
||||
|
|
@ -416,13 +416,13 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "usbasp";
|
||||
desc = "USBasp, http://www.fischl.de/usbasp/";
|
||||
desc = "USBasp, https://www.fischl.de/usbasp/";
|
||||
type = usbasp;
|
||||
;
|
||||
|
||||
programmer
|
||||
id = "usbtiny";
|
||||
desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/";
|
||||
desc = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/";
|
||||
type = usbtiny;
|
||||
;
|
||||
|
||||
|
|
@ -596,7 +596,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "bsd";
|
||||
desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/";
|
||||
desc = "Brian Dean's Programmer, https://www.bsdhome.com/avrdude/";
|
||||
type = par;
|
||||
vcc = 2, 3, 4, 5;
|
||||
reset = 7;
|
||||
|
|
@ -655,7 +655,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "alf";
|
||||
desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/";
|
||||
desc = "Nightshade ALF-PgmAVR, https://nightshade.homeip.net/";
|
||||
type = par;
|
||||
vcc = 2, 3, 4, 5;
|
||||
buff = 6;
|
||||
|
|
@ -682,7 +682,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "picoweb";
|
||||
desc = "Picoweb Programming Cable, http://www.picoweb.net/";
|
||||
desc = "Picoweb Programming Cable, https://www.picoweb.net/";
|
||||
type = par;
|
||||
reset = 2;
|
||||
sck = 3;
|
||||
|
|
@ -743,7 +743,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "atisp";
|
||||
desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from <http://micro-research.co.th/> micro-research.co.th";
|
||||
desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from <https://micro-research.co.th/> micro-research.co.th";
|
||||
type = par;
|
||||
reset = ~6;
|
||||
sck = ~8;
|
||||
|
|
@ -753,7 +753,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "ere-isp-avr";
|
||||
desc = "ERE ISP-AVR <http://www.ere.co.th/download/sch050713.pdf>";
|
||||
desc = "ERE ISP-AVR <https://www.ere.co.th/download/sch050713.pdf>";
|
||||
type = par;
|
||||
reset = ~4;
|
||||
sck = 3;
|
||||
|
|
@ -773,7 +773,7 @@ programmer
|
|||
;
|
||||
|
||||
# It is almost same as pony-stk200, except vcc on pin 5 to auto
|
||||
# disconnect port (download on http://electropol.free.fr)
|
||||
# disconnect port (download on https://electropol.free.fr)
|
||||
programmer
|
||||
id = "frank-stk200";
|
||||
desc = "Frank STK200";
|
||||
|
|
@ -787,7 +787,7 @@ programmer
|
|||
;
|
||||
|
||||
# The AT98ISP Cable is a simple parallel dongle for AT89 family.
|
||||
# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
|
||||
# https://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
|
||||
programmer
|
||||
id = "89isp";
|
||||
desc = "Atmel at89isp cable";
|
||||
|
|
@ -836,7 +836,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "siprog";
|
||||
desc = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
|
||||
desc = "Lancos SI-Prog <https://www.lancos.com/siprogsch.html>";
|
||||
type = serbb;
|
||||
reset = ~3;
|
||||
sck = 7;
|
||||
|
|
|
|||
|
|
@ -147,7 +147,7 @@
|
|||
# This flag was added to work around a problem with the
|
||||
# at90s4433/2333's; see the at90s4433 errata at:
|
||||
#
|
||||
# http://www.atmel.com/atmel/acrobat/doc1280.pdf
|
||||
# https://www.atmel.com/atmel/acrobat/doc1280.pdf
|
||||
#
|
||||
# INSTRUCTION FORMATS
|
||||
#
|
||||
|
|
@ -184,7 +184,7 @@
|
|||
# section avr061.zip which accompanies the application note
|
||||
# AVR061 available from:
|
||||
#
|
||||
# http://www.atmel.com/atmel/acrobat/doc2525.pdf
|
||||
# https://www.atmel.com/atmel/acrobat/doc2525.pdf
|
||||
#
|
||||
|
||||
#define ATTINY10 0x10 /* the _old_ one that never existed! */
|
||||
|
|
@ -416,13 +416,13 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "usbasp";
|
||||
desc = "USBasp, http://www.fischl.de/usbasp/";
|
||||
desc = "USBasp, https://www.fischl.de/usbasp/";
|
||||
type = usbasp;
|
||||
;
|
||||
|
||||
programmer
|
||||
id = "usbtiny";
|
||||
desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/";
|
||||
desc = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/";
|
||||
type = usbtiny;
|
||||
;
|
||||
|
||||
|
|
@ -596,7 +596,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "bsd";
|
||||
desc = "Brian Dean's Programmer, http://www.bsdhome.com/avrdude/";
|
||||
desc = "Brian Dean's Programmer, https://www.bsdhome.com/avrdude/";
|
||||
type = par;
|
||||
vcc = 2, 3, 4, 5;
|
||||
reset = 7;
|
||||
|
|
@ -655,7 +655,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "alf";
|
||||
desc = "Nightshade ALF-PgmAVR, http://nightshade.homeip.net/";
|
||||
desc = "Nightshade ALF-PgmAVR, https://nightshade.homeip.net/";
|
||||
type = par;
|
||||
vcc = 2, 3, 4, 5;
|
||||
buff = 6;
|
||||
|
|
@ -682,7 +682,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "picoweb";
|
||||
desc = "Picoweb Programming Cable, http://www.picoweb.net/";
|
||||
desc = "Picoweb Programming Cable, https://www.picoweb.net/";
|
||||
type = par;
|
||||
reset = 2;
|
||||
sck = 3;
|
||||
|
|
@ -743,7 +743,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "atisp";
|
||||
desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from <http://micro-research.co.th/> micro-research.co.th";
|
||||
desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from <https://micro-research.co.th/> micro-research.co.th";
|
||||
type = par;
|
||||
reset = ~6;
|
||||
sck = ~8;
|
||||
|
|
@ -753,7 +753,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "ere-isp-avr";
|
||||
desc = "ERE ISP-AVR <http://www.ere.co.th/download/sch050713.pdf>";
|
||||
desc = "ERE ISP-AVR <https://www.ere.co.th/download/sch050713.pdf>";
|
||||
type = par;
|
||||
reset = ~4;
|
||||
sck = 3;
|
||||
|
|
@ -773,7 +773,7 @@ programmer
|
|||
;
|
||||
|
||||
# It is almost same as pony-stk200, except vcc on pin 5 to auto
|
||||
# disconnect port (download on http://electropol.free.fr)
|
||||
# disconnect port (download on https://electropol.free.fr)
|
||||
programmer
|
||||
id = "frank-stk200";
|
||||
desc = "Frank STK200";
|
||||
|
|
@ -787,7 +787,7 @@ programmer
|
|||
;
|
||||
|
||||
# The AT98ISP Cable is a simple parallel dongle for AT89 family.
|
||||
# http://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
|
||||
# https://www.atmel.com/dyn/products/tools_card.asp?tool_id=2877
|
||||
programmer
|
||||
id = "89isp";
|
||||
desc = "Atmel at89isp cable";
|
||||
|
|
@ -836,7 +836,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "siprog";
|
||||
desc = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
|
||||
desc = "Lancos SI-Prog <https://www.lancos.com/siprogsch.html>";
|
||||
type = serbb;
|
||||
reset = ~3;
|
||||
sck = 7;
|
||||
|
|
|
|||
|
|
@ -147,7 +147,7 @@
|
|||
# This flag was added to work around a problem with the
|
||||
# at90s4433/2333's; see the at90s4433 errata at:
|
||||
#
|
||||
# http://www.atmel.com/atmel/acrobat/doc1280.pdf
|
||||
# https://www.atmel.com/atmel/acrobat/doc1280.pdf
|
||||
#
|
||||
# INSTRUCTION FORMATS
|
||||
#
|
||||
|
|
@ -184,7 +184,7 @@
|
|||
# section avr061.zip which accompanies the application note
|
||||
# AVR061 available from:
|
||||
#
|
||||
# http://www.atmel.com/atmel/acrobat/doc2525.pdf
|
||||
# https://www.atmel.com/atmel/acrobat/doc2525.pdf
|
||||
#
|
||||
|
||||
#define ATTINY10 0x10 /* the _old_ one that never existed! */
|
||||
|
|
@ -416,13 +416,13 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "usbasp";
|
||||
desc = "USBasp, http://www.fischl.de/usbasp/";
|
||||
desc = "USBasp, https://www.fischl.de/usbasp/";
|
||||
type = usbasp;
|
||||
;
|
||||
|
||||
programmer
|
||||
id = "usbtiny";
|
||||
desc = "USBtiny simple USB programmer, http://www.ladyada.net/make/usbtinyisp/";
|
||||
desc = "USBtiny simple USB programmer, https://www.ladyada.net/make/usbtinyisp/";
|
||||
type = usbtiny;
|
||||
;
|
||||
|
||||
|
|
@ -630,7 +630,7 @@ programmer
|
|||
|
||||
programmer
|
||||
id = "siprog";
|
||||
desc = "Lancos SI-Prog <http://www.lancos.com/siprogsch.html>";
|
||||
desc = "Lancos SI-Prog <https://www.lancos.com/siprogsch.html>";
|
||||
type = serbb;
|
||||
reset = ~3;
|
||||
sck = 7;
|
||||
|
|
|
|||
|
|
@ -769,7 +769,7 @@ upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"
|
|||
|
||||
#
|
||||
# STM32F407VET6 with RAMPS-like shield
|
||||
# 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
|
||||
# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
|
||||
# Shield - https://github.com/jmz52/Hardware
|
||||
#
|
||||
[env:STM32F407VE_black]
|
||||
|
|
|
|||
Loading…
Reference in a new issue