diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 2273980e72..1386720d25 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -464,6 +464,31 @@ #define E4_ENABLE_PIN -1 #endif +#ifndef X_CS_PIN + #define X_CS_PIN -1 +#endif +#ifndef Y_CS_PIN + #define Y_CS_PIN -1 +#endif +#ifndef Z_CS_PIN + #define Z_CS_PIN -1 +#endif +#ifndef E0_CS_PIN + #define E0_CS_PIN -1 +#endif +#ifndef E1_CS_PIN + #define E1_CS_PIN -1 +#endif +#ifndef E2_CS_PIN + #define E2_CS_PIN -1 +#endif +#ifndef E3_CS_PIN + #define E3_CS_PIN -1 +#endif +#ifndef E4_CS_PIN + #define E4_CS_PIN -1 +#endif + #ifndef FAN_PIN #define FAN_PIN -1 #endif @@ -591,7 +616,7 @@ #endif // List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! -#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN, +#define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN, E0_MS1_PIN, E0_MS2_PIN, E0_CS_PIN, #define _E1_PINS #define _E2_PINS #define _E3_PINS @@ -601,30 +626,33 @@ // Tools 0 and 1 use E0 #if EXTRUDERS > 2 // Tools 2 and 3 use E1 #undef _E1_PINS - #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, + #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN, #if EXTRUDERS > 4 // Tools 4 and 5 use E2 #undef _E2_PINS - #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, + #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN, #endif #endif #elif EXTRUDERS > 1 #undef _E1_PINS - #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, + #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN, #if EXTRUDERS > 2 #undef _E2_PINS - #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, + #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN, #if EXTRUDERS > 3 #undef _E3_PINS - #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN, + #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN, E3_MS3_PIN, E3_CS_PIN, #if EXTRUDERS > 4 #undef _E4_PINS - #define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN, + #define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN, E4_MS3_PIN, E4_CS_PIN, #endif // EXTRUDERS > 4 #endif // EXTRUDERS > 3 #endif // EXTRUDERS > 2 #endif // EXTRUDERS > 1 -#define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_0_PIN), +// Marlin needs to account for pins that equal -1 +#define marlinAnalogInputToDigitalPin(p) ((p) == -1 ? -1 : analogInputToDigitalPin(p)) + +#define _H0_PINS HEATER_0_PIN, E0_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_0_PIN), #define _H1_PINS #define _H2_PINS #define _H3_PINS @@ -632,37 +660,37 @@ #if HOTENDS > 1 #undef _H1_PINS - #define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_1_PIN), + #define _H1_PINS HEATER_1_PIN, E1_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_1_PIN), #if HOTENDS > 2 #undef _H2_PINS - #define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_2_PIN), + #define _H2_PINS HEATER_2_PIN, E2_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_2_PIN), #if HOTENDS > 3 #undef _H3_PINS - #define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, analogInputToDigitalPin(TEMP_3_PIN), + #define _H3_PINS HEATER_3_PIN, E3_AUTO_FAN_PIN, marlinAnalogInputToDigitalPin(TEMP_3_PIN), #if HOTENDS > 4 #undef _H4_PINS - #define _H4_PINS HEATER_4_PIN, analogInputToDigitalPin(TEMP_4_PIN), + #define _H4_PINS HEATER_4_PIN, marlinAnalogInputToDigitalPin(TEMP_4_PIN), #endif // HOTENDS > 4 #endif // HOTENDS > 3 #endif // HOTENDS > 2 #elif ENABLED(MIXING_EXTRUDER) #undef _E1_PINS - #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, + #define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN, E1_MS1_PIN, E1_MS2_PIN, E1_CS_PIN, #if MIXING_STEPPERS > 2 #undef _E2_PINS - #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, + #define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN, E2_MS1_PIN, E2_MS2_PIN, E2_CS_PIN, #if MIXING_STEPPERS > 3 #undef _E3_PINS - #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN, + #define _E3_PINS E3_STEP_PIN, E3_DIR_PIN, E3_ENABLE_PIN, E3_MS1_PIN, E3_MS2_PIN, E3_CS_PIN, #if MIXING_STEPPERS > 4 #undef _E4_PINS - #define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN, + #define _E4_PINS E4_STEP_PIN, E4_DIR_PIN, E4_ENABLE_PIN, E4_MS1_PIN, E4_MS2_PIN, E4_CS_PIN, #endif // MIXING_STEPPERS > 4 #endif // MIXING_STEPPERS > 3 #endif // MIXING_STEPPERS > 2 #endif // MIXING_STEPPERS > 1 -#define BED_PINS HEATER_BED_PIN, analogInputToDigitalPin(TEMP_BED_PIN), +#define BED_PINS HEATER_BED_PIN, marlinAnalogInputToDigitalPin(TEMP_BED_PIN), // // Assign endstop pins for boards with only 3 connectors @@ -765,12 +793,13 @@ #define X2_STEP_PIN _EPIN(E_STEPPERS, STEP) #define X2_DIR_PIN _EPIN(E_STEPPERS, DIR) #define X2_ENABLE_PIN _EPIN(E_STEPPERS, ENABLE) + #define X2_CS_PIN _EPIN(E_STEPPERS, CS) #if E_STEPPERS > 4 || !PIN_EXISTS(X2_ENABLE) #error "No E stepper plug left for X2!" #endif #endif #undef _X2_PINS - #define _X2_PINS X2_STEP_PIN, X2_DIR_PIN, X2_ENABLE_PIN, + #define _X2_PINS X2_STEP_PIN, X2_DIR_PIN, X2_ENABLE_PIN, X2_CS_PIN, #define Y2_E_INDEX INCREMENT(E_STEPPERS) #else #define Y2_E_INDEX E_STEPPERS @@ -782,12 +811,13 @@ #define Y2_STEP_PIN _EPIN(Y2_E_INDEX, STEP) #define Y2_DIR_PIN _EPIN(Y2_E_INDEX, DIR) #define Y2_ENABLE_PIN _EPIN(Y2_E_INDEX, ENABLE) + #define Y2_CS_PIN _EPIN(Y2_E_INDEX, CS) #if Y2_E_INDEX > 4 || !PIN_EXISTS(Y2_ENABLE) #error "No E stepper plug left for Y2!" #endif #endif #undef _Y2_PINS - #define _Y2_PINS Y2_STEP_PIN, Y2_DIR_PIN, Y2_ENABLE_PIN, + #define _Y2_PINS Y2_STEP_PIN, Y2_DIR_PIN, Y2_ENABLE_PIN, Y2_CS_PIN, #define Z2_E_INDEX INCREMENT(Y2_E_INDEX) #else #define Z2_E_INDEX Y2_E_INDEX @@ -799,12 +829,13 @@ #define Z2_STEP_PIN _EPIN(Z2_E_INDEX, STEP) #define Z2_DIR_PIN _EPIN(Z2_E_INDEX, DIR) #define Z2_ENABLE_PIN _EPIN(Z2_E_INDEX, ENABLE) + #define Z2_CS_PIN _EPIN(Z2_E_INDEX, CS) #if Z2_E_INDEX > 4 || !PIN_EXISTS(Z2_ENABLE) #error "No E stepper plug left for Z2!" #endif #endif #undef _Z2_PINS - #define _Z2_PINS Z2_STEP_PIN, Z2_DIR_PIN, Z2_ENABLE_PIN, + #define _Z2_PINS Z2_STEP_PIN, Z2_DIR_PIN, Z2_ENABLE_PIN, Z2_CS_PIN, #endif #ifndef HAL_SENSITIVE_PINS @@ -812,14 +843,13 @@ #endif #define SENSITIVE_PINS { \ - X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, \ - Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, \ - Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MIN_PROBE_PIN, \ + X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, X_MS1_PIN, X_MS2_PIN, X_CS_PIN, \ + Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Y_MS1_PIN, Y_MS2_PIN, Y_CS_PIN, \ + Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, Z_MS1_PIN, Z_MS2_PIN, Z_MS3_PIN, Z_CS_PIN, Z_MIN_PROBE_PIN, \ PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLER_FAN_PIN, \ _E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS BED_PINS \ _H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS \ _X2_PINS _Y2_PINS _Z2_PINS \ - X_MS1_PIN, X_MS2_PIN, Y_MS1_PIN, Y_MS2_PIN, Z_MS1_PIN, Z_MS2_PIN, \ HAL_SENSITIVE_PINS \ }