From d4c74b8f8cb67190f62e29bc256b8b85e940efee Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 29 Apr 2015 19:05:48 -0700 Subject: [PATCH] Don't apply M428 if an error occurs - Also move audio feedback into the command - Added shorthand for `lcd_buzz` availability --- Marlin/Marlin_main.cpp | 56 +++++++++++++++++++-------- Marlin/configurator/config/language.h | 1 + Marlin/language.h | 2 +- Marlin/ultralcd.cpp | 12 +++--- Marlin/ultralcd.h | 2 +- 5 files changed, 49 insertions(+), 24 deletions(-) diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 6e41e13350..637ebc5a71 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -36,6 +36,7 @@ #endif #endif // ENABLE_AUTO_BED_LEVELING +#define HAS_LCD_BUZZ (defined(ULTRALCD) || (defined(BEEPER) && BEEPER >= 0) || defined(LCD_USE_I2C_BUZZER)) #define SERVO_LEVELING (defined(ENABLE_AUTO_BED_LEVELING) && PROBE_SERVO_DEACTIVATION_DELAY > 0) #ifdef MESH_BED_LEVELING @@ -4091,7 +4092,7 @@ inline void gcode_M226() { #endif // NUM_SERVOS > 0 -#if BEEPER > 0 || defined(ULTRALCD) || defined(LCD_USE_I2C_BUZZER) +#if HAS_LCD_BUZZ /** * M300: Play beep sound S P @@ -4103,7 +4104,7 @@ inline void gcode_M226() { lcd_buzz(beepP, beepS); } -#endif // BEEPER>0 || ULTRALCD || LCD_USE_I2C_BUZZER +#endif // HAS_LCD_BUZZ #ifdef PIDTEMP @@ -4507,27 +4508,50 @@ inline void gcode_M410() { quickStop(); } /** * M428: Set home_offset based on the distance between the - * current_position and the nearest "reference position." - * If an axis is past center the endstop position + * current_position and the nearest "reference point." + * If an axis is past center its endstop position * is the reference-point. Otherwise it uses 0. This allows * the Z offset to be set near the bed when using a max endstop. * + * M428 can't be used more than 2cm away from 0 or an endstop. + * * Use M206 to set these values directly. */ inline void gcode_M428() { + bool err = false; + float new_offs[3], new_pos[3]; + memcpy(new_pos, current_position, sizeof(new_pos)); + memcpy(new_offs, home_offset, sizeof(new_offs)); for (int8_t i = X_AXIS; i <= Z_AXIS; i++) { - float base = (current_position[i] > (min_pos[i] + max_pos[i]) / 2) ? base_home_pos(i) : 0, - diff = current_position[i] - base; - if (diff > -20 && diff < 20) { - home_offset[i] -= diff; - current_position[i] = base; - } - else { - SERIAL_ERROR_START; - SERIAL_ERRORLNPGM(MSG_ERR_M428_TOO_FAR); + if (axis_known_position[i]) { + float base = (new_pos[i] > (min_pos[i] + max_pos[i]) / 2) ? base_home_pos(i) : 0, + diff = new_pos[i] - base; + if (diff > -20 && diff < 20) { + new_offs[i] -= diff; + new_pos[i] = base; + } + else { + SERIAL_ERROR_START; + SERIAL_ERRORLNPGM(MSG_ERR_M428_TOO_FAR); + LCD_ALERTMESSAGEPGM("Err: Too far!"); + #if HAS_LCD_BUZZ + enqueuecommands_P(PSTR("M300 S40 P200")); + #endif + err = true; + break; + } } } - sync_plan_position(); + + if (!err) { + memcpy(current_position, new_pos, sizeof(new_pos)); + memcpy(home_offset, new_offs, sizeof(new_offs)); + sync_plan_position(); + LCD_ALERTMESSAGEPGM("Offset applied."); + #if HAS_LCD_BUZZ + enqueuecommands_P(PSTR("M300 S659 P200\nM300 S698 P200")); + #endif + } } /** @@ -5277,11 +5301,11 @@ void process_commands() { break; #endif // NUM_SERVOS > 0 - #if BEEPER > 0 || defined(ULTRALCD) || defined(LCD_USE_I2C_BUZZER) + #if HAS_LCD_BUZZ case 300: // M300 - Play beep tone gcode_M300(); break; - #endif // BEEPER > 0 || ULTRALCD || LCD_USE_I2C_BUZZER + #endif // HAS_LCD_BUZZ #ifdef PIDTEMP case 301: // M301 diff --git a/Marlin/configurator/config/language.h b/Marlin/configurator/config/language.h index d8ceafb1a5..a56ee522f8 100644 --- a/Marlin/configurator/config/language.h +++ b/Marlin/configurator/config/language.h @@ -161,6 +161,7 @@ #define MSG_ERR_MATERIAL_INDEX "M145 S out of range (0-1)" #define MSG_ERR_M421_REQUIRES_XYZ "M421 requires XYZ parameters" #define MSG_ERR_MESH_INDEX_OOB "Mesh XY index is out of bounds" +#define MSG_ERR_M428_TOO_FAR "Too far from reference point" #define MSG_M119_REPORT "Reporting endstop status" #define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_ENDSTOP_OPEN "open" diff --git a/Marlin/language.h b/Marlin/language.h index 31239658eb..02cd675c8b 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -162,7 +162,7 @@ #define MSG_ERR_MATERIAL_INDEX "M145 S out of range (0-1)" #define MSG_ERR_M421_REQUIRES_XYZ "M421 requires XYZ parameters" #define MSG_ERR_MESH_INDEX_OOB "Mesh XY index is out of bounds" -#define MSG_ERR_M428_TOO_FAR "Too far from home or origin position" +#define MSG_ERR_M428_TOO_FAR "Too far from reference point" #define MSG_M119_REPORT "Reporting endstop status" #define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_ENDSTOP_OPEN "open" diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 57e5113617..5ca0943376 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -442,8 +442,8 @@ static void lcd_main_menu() { * Set the home offset based on the current_position */ void lcd_set_home_offsets() { - // Command with Audio feedback - enqueuecommands_P(PSTR("M428\nM300 S659 P200\nM300 S698 P200")); + // M428 Command + enqueuecommands_P(PSTR("M428")); lcd_return_to_status(); } @@ -1285,7 +1285,7 @@ void lcd_quick_feedback() { #define LCD_FEEDBACK_FREQUENCY_DURATION_MS (1000/6) #endif lcd_buzz(LCD_FEEDBACK_FREQUENCY_DURATION_MS, LCD_FEEDBACK_FREQUENCY_HZ); - #elif defined(BEEPER) && BEEPER > -1 + #elif defined(BEEPER) && BEEPER >= 0 #ifndef LCD_FEEDBACK_FREQUENCY_HZ #define LCD_FEEDBACK_FREQUENCY_HZ 5000 #endif @@ -1718,12 +1718,12 @@ void lcd_reset_alert_level() { lcd_status_message_level = 0; } void lcd_buzz(long duration, uint16_t freq) { if (freq > 0) { - #if BEEPER > 0 + #ifdef LCD_USE_I2C_BUZZER + lcd.buzz(duration, freq); + #elif defined(BEEPER) && BEEPER >= 0 SET_OUTPUT(BEEPER); tone(BEEPER, freq, duration); delay(duration); - #elif defined(LCD_USE_I2C_BUZZER) - lcd.buzz(duration, freq); #else delay(duration); #endif diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index 8f96f008ba..956b728286 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -106,7 +106,7 @@ FORCE_INLINE void lcd_setstatuspgm(const char* message, const uint8_t level=0) {} FORCE_INLINE void lcd_buttons_update() {} FORCE_INLINE void lcd_reset_alert_level() {} - FORCE_INLINE void lcd_buzz(long duration,uint16_t freq) {} + FORCE_INLINE void lcd_buzz(long duration, uint16_t freq) {} FORCE_INLINE bool lcd_detected(void) { return true; } #define LCD_MESSAGEPGM(x) do{}while(0)