Add 5DPrint D8 Driver Board info and temperature table for Makibox hot bed

Marlin/Configuration.h

@@ -70,6 +70,7 @@
 // 91 = Final OMCA board
 // 301= Rambo
 // 21 = Elefu Ra Board (v3)
+// 88 = 5DPrint D8 Driver Board
 
 #ifndef MOTHERBOARD
 #define MOTHERBOARD 7
@@ -116,6 +117,7 @@
 // 9 is 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
 // 10 is 100k RS thermistor 198-961 (4.7k pullup)
 // 11 is 100k beta 3950 1% thermistor (4.7k pullup)
+// 12 is 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
 // 20 is the PT100 circuit found in the Ultimainboard V2.x
 // 60 is 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
 //

Marlin/thermistortables.h

@@ -921,6 +921,41 @@ const short temptable_60[][2] PROGMEM = {
    {1008*OVERSAMPLENR, 0},
 };
 #endif
+#if (THERMISTORBED == 12) 
+//100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
+const short temptable_12[][2] PROGMEM = {
+   {35*OVERSAMPLENR, 180}, //top rating 180C
+   {211*OVERSAMPLENR, 140},
+   {233*OVERSAMPLENR, 135},
+   {261*OVERSAMPLENR, 130},
+   {290*OVERSAMPLENR, 125},
+   {328*OVERSAMPLENR, 120},
+   {362*OVERSAMPLENR, 115},
+   {406*OVERSAMPLENR, 110},
+   {446*OVERSAMPLENR, 105},
+   {496*OVERSAMPLENR, 100},
+   {539*OVERSAMPLENR, 95},
+   {585*OVERSAMPLENR, 90},
+   {629*OVERSAMPLENR, 85},
+   {675*OVERSAMPLENR, 80},
+   {718*OVERSAMPLENR, 75},
+   {758*OVERSAMPLENR, 70},
+   {793*OVERSAMPLENR, 65},
+   {822*OVERSAMPLENR, 60},
+   {841*OVERSAMPLENR, 55},
+   {875*OVERSAMPLENR, 50},
+   {899*OVERSAMPLENR, 45},
+   {926*OVERSAMPLENR, 40},
+   {946*OVERSAMPLENR, 35},
+   {962*OVERSAMPLENR, 30},
+   {977*OVERSAMPLENR, 25},
+   {987*OVERSAMPLENR, 20},
+   {995*OVERSAMPLENR, 15},
+   {1001*OVERSAMPLENR, 10},
+   {1010*OVERSAMPLENR, 0},
+   {1023*OVERSAMPLENR, -40},
+};
+#endif
 
 // Pt1000 and Pt100 handling
 //