diff --git a/Marlin/src/feature/controllerfan.cpp b/Marlin/src/feature/controllerfan.cpp index b152b0bd7a..7f02e4c189 100644 --- a/Marlin/src/feature/controllerfan.cpp +++ b/Marlin/src/feature/controllerfan.cpp @@ -36,27 +36,27 @@ void controllerfan_update() { if (ELAPSED(ms, nextMotorCheck)) { nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s - const bool xory = X_ENABLE_READ() == X_ENABLE_ON || Y_ENABLE_READ() == Y_ENABLE_ON; + const bool xory = X_ENABLE_READ() == bool(X_ENABLE_ON) || Y_ENABLE_READ() == bool(Y_ENABLE_ON); // If any of the drivers or the bed are enabled... - if (xory || Z_ENABLE_READ() == Z_ENABLE_ON + if (xory || Z_ENABLE_READ() == bool(Z_ENABLE_ON) #if HAS_HEATED_BED || thermalManager.temp_bed.soft_pwm_amount > 0 #endif #if HAS_X2_ENABLE - || X2_ENABLE_READ() == X_ENABLE_ON + || X2_ENABLE_READ() == bool(X_ENABLE_ON) #endif #if HAS_Y2_ENABLE - || Y2_ENABLE_READ() == Y_ENABLE_ON + || Y2_ENABLE_READ() == bool(Y_ENABLE_ON) #endif #if HAS_Z2_ENABLE - || Z2_ENABLE_READ() == Z_ENABLE_ON + || Z2_ENABLE_READ() == bool(Z_ENABLE_ON) #endif #if HAS_Z3_ENABLE - || Z3_ENABLE_READ() == Z_ENABLE_ON + || Z3_ENABLE_READ() == bool(Z_ENABLE_ON) #endif #if E_STEPPERS - #define _OR_ENABLED_E(N) || E##N##_ENABLE_READ() == E_ENABLE_ON + #define _OR_ENABLED_E(N) || E##N##_ENABLE_READ() == bool(E_ENABLE_ON) REPEAT(E_STEPPERS, _OR_ENABLED_E) #endif ) { diff --git a/Marlin/src/module/stepper/indirection.h b/Marlin/src/module/stepper/indirection.h index 28dc00436a..c1bcb71407 100644 --- a/Marlin/src/module/stepper/indirection.h +++ b/Marlin/src/module/stepper/indirection.h @@ -51,70 +51,70 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #ifndef X_ENABLE_INIT #define X_ENABLE_INIT() SET_OUTPUT(X_ENABLE_PIN) #define X_ENABLE_WRITE(STATE) WRITE(X_ENABLE_PIN,STATE) - #define X_ENABLE_READ() READ(X_ENABLE_PIN) + #define X_ENABLE_READ() bool(READ(X_ENABLE_PIN)) #endif #ifndef X_DIR_INIT #define X_DIR_INIT() SET_OUTPUT(X_DIR_PIN) #define X_DIR_WRITE(STATE) WRITE(X_DIR_PIN,STATE) - #define X_DIR_READ() READ(X_DIR_PIN) + #define X_DIR_READ() bool(READ(X_DIR_PIN)) #endif #define X_STEP_INIT() SET_OUTPUT(X_STEP_PIN) #ifndef X_STEP_WRITE #define X_STEP_WRITE(STATE) WRITE(X_STEP_PIN,STATE) #endif -#define X_STEP_READ() READ(X_STEP_PIN) +#define X_STEP_READ() bool(READ(X_STEP_PIN)) // Y Stepper #ifndef Y_ENABLE_INIT #define Y_ENABLE_INIT() SET_OUTPUT(Y_ENABLE_PIN) #define Y_ENABLE_WRITE(STATE) WRITE(Y_ENABLE_PIN,STATE) - #define Y_ENABLE_READ() READ(Y_ENABLE_PIN) + #define Y_ENABLE_READ() bool(READ(Y_ENABLE_PIN)) #endif #ifndef Y_DIR_INIT #define Y_DIR_INIT() SET_OUTPUT(Y_DIR_PIN) #define Y_DIR_WRITE(STATE) WRITE(Y_DIR_PIN,STATE) - #define Y_DIR_READ() READ(Y_DIR_PIN) + #define Y_DIR_READ() bool(READ(Y_DIR_PIN)) #endif #define Y_STEP_INIT() SET_OUTPUT(Y_STEP_PIN) #ifndef Y_STEP_WRITE #define Y_STEP_WRITE(STATE) WRITE(Y_STEP_PIN,STATE) #endif -#define Y_STEP_READ() READ(Y_STEP_PIN) +#define Y_STEP_READ() bool(READ(Y_STEP_PIN)) // Z Stepper #ifndef Z_ENABLE_INIT #define Z_ENABLE_INIT() SET_OUTPUT(Z_ENABLE_PIN) #define Z_ENABLE_WRITE(STATE) WRITE(Z_ENABLE_PIN,STATE) - #define Z_ENABLE_READ() READ(Z_ENABLE_PIN) + #define Z_ENABLE_READ() bool(READ(Z_ENABLE_PIN)) #endif #ifndef Z_DIR_INIT #define Z_DIR_INIT() SET_OUTPUT(Z_DIR_PIN) #define Z_DIR_WRITE(STATE) WRITE(Z_DIR_PIN,STATE) - #define Z_DIR_READ() READ(Z_DIR_PIN) + #define Z_DIR_READ() bool(READ(Z_DIR_PIN)) #endif #define Z_STEP_INIT() SET_OUTPUT(Z_STEP_PIN) #ifndef Z_STEP_WRITE #define Z_STEP_WRITE(STATE) WRITE(Z_STEP_PIN,STATE) #endif -#define Z_STEP_READ() READ(Z_STEP_PIN) +#define Z_STEP_READ() bool(READ(Z_STEP_PIN)) // X2 Stepper #if HAS_X2_ENABLE #ifndef X2_ENABLE_INIT #define X2_ENABLE_INIT() SET_OUTPUT(X2_ENABLE_PIN) #define X2_ENABLE_WRITE(STATE) WRITE(X2_ENABLE_PIN,STATE) - #define X2_ENABLE_READ() READ(X2_ENABLE_PIN) + #define X2_ENABLE_READ() bool(READ(X2_ENABLE_PIN)) #endif #ifndef X2_DIR_INIT #define X2_DIR_INIT() SET_OUTPUT(X2_DIR_PIN) #define X2_DIR_WRITE(STATE) WRITE(X2_DIR_PIN,STATE) - #define X2_DIR_READ() READ(X2_DIR_PIN) + #define X2_DIR_READ() bool(READ(X2_DIR_PIN)) #endif #define X2_STEP_INIT() SET_OUTPUT(X2_STEP_PIN) #ifndef X2_STEP_WRITE #define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE) #endif - #define X2_STEP_READ() READ(X2_STEP_PIN) + #define X2_STEP_READ() bool(READ(X2_STEP_PIN)) #endif // Y2 Stepper @@ -122,18 +122,18 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #ifndef Y2_ENABLE_INIT #define Y2_ENABLE_INIT() SET_OUTPUT(Y2_ENABLE_PIN) #define Y2_ENABLE_WRITE(STATE) WRITE(Y2_ENABLE_PIN,STATE) - #define Y2_ENABLE_READ() READ(Y2_ENABLE_PIN) + #define Y2_ENABLE_READ() bool(READ(Y2_ENABLE_PIN)) #endif #ifndef Y2_DIR_INIT #define Y2_DIR_INIT() SET_OUTPUT(Y2_DIR_PIN) #define Y2_DIR_WRITE(STATE) WRITE(Y2_DIR_PIN,STATE) - #define Y2_DIR_READ() READ(Y2_DIR_PIN) + #define Y2_DIR_READ() bool(READ(Y2_DIR_PIN)) #endif #define Y2_STEP_INIT() SET_OUTPUT(Y2_STEP_PIN) #ifndef Y2_STEP_WRITE #define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE) #endif - #define Y2_STEP_READ() READ(Y2_STEP_PIN) + #define Y2_STEP_READ() bool(READ(Y2_STEP_PIN)) #else #define Y2_DIR_WRITE(STATE) NOOP #endif @@ -143,18 +143,18 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #ifndef Z2_ENABLE_INIT #define Z2_ENABLE_INIT() SET_OUTPUT(Z2_ENABLE_PIN) #define Z2_ENABLE_WRITE(STATE) WRITE(Z2_ENABLE_PIN,STATE) - #define Z2_ENABLE_READ() READ(Z2_ENABLE_PIN) + #define Z2_ENABLE_READ() bool(READ(Z2_ENABLE_PIN)) #endif #ifndef Z2_DIR_INIT #define Z2_DIR_INIT() SET_OUTPUT(Z2_DIR_PIN) #define Z2_DIR_WRITE(STATE) WRITE(Z2_DIR_PIN,STATE) - #define Z2_DIR_READ() READ(Z2_DIR_PIN) + #define Z2_DIR_READ() bool(READ(Z2_DIR_PIN)) #endif #define Z2_STEP_INIT() SET_OUTPUT(Z2_STEP_PIN) #ifndef Z2_STEP_WRITE #define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE) #endif - #define Z2_STEP_READ() READ(Z2_STEP_PIN) + #define Z2_STEP_READ() bool(READ(Z2_STEP_PIN)) #else #define Z2_DIR_WRITE(STATE) NOOP #endif @@ -164,18 +164,18 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #ifndef Z3_ENABLE_INIT #define Z3_ENABLE_INIT() SET_OUTPUT(Z3_ENABLE_PIN) #define Z3_ENABLE_WRITE(STATE) WRITE(Z3_ENABLE_PIN,STATE) - #define Z3_ENABLE_READ() READ(Z3_ENABLE_PIN) + #define Z3_ENABLE_READ() bool(READ(Z3_ENABLE_PIN)) #endif #ifndef Z3_DIR_INIT #define Z3_DIR_INIT() SET_OUTPUT(Z3_DIR_PIN) #define Z3_DIR_WRITE(STATE) WRITE(Z3_DIR_PIN,STATE) - #define Z3_DIR_READ() READ(Z3_DIR_PIN) + #define Z3_DIR_READ() bool(READ(Z3_DIR_PIN)) #endif #define Z3_STEP_INIT() SET_OUTPUT(Z3_STEP_PIN) #ifndef Z3_STEP_WRITE #define Z3_STEP_WRITE(STATE) WRITE(Z3_STEP_PIN,STATE) #endif - #define Z3_STEP_READ() READ(Z3_STEP_PIN) + #define Z3_STEP_READ() bool(READ(Z3_STEP_PIN)) #else #define Z3_DIR_WRITE(STATE) NOOP #endif @@ -184,103 +184,103 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #ifndef E0_ENABLE_INIT #define E0_ENABLE_INIT() SET_OUTPUT(E0_ENABLE_PIN) #define E0_ENABLE_WRITE(STATE) WRITE(E0_ENABLE_PIN,STATE) - #define E0_ENABLE_READ() READ(E0_ENABLE_PIN) + #define E0_ENABLE_READ() bool(READ(E0_ENABLE_PIN)) #endif #ifndef E0_DIR_INIT #define E0_DIR_INIT() SET_OUTPUT(E0_DIR_PIN) #define E0_DIR_WRITE(STATE) WRITE(E0_DIR_PIN,STATE) - #define E0_DIR_READ() READ(E0_DIR_PIN) + #define E0_DIR_READ() bool(READ(E0_DIR_PIN)) #endif #define E0_STEP_INIT() SET_OUTPUT(E0_STEP_PIN) #ifndef E0_STEP_WRITE #define E0_STEP_WRITE(STATE) WRITE(E0_STEP_PIN,STATE) #endif -#define E0_STEP_READ() READ(E0_STEP_PIN) +#define E0_STEP_READ() bool(READ(E0_STEP_PIN)) // E1 Stepper #ifndef E1_ENABLE_INIT #define E1_ENABLE_INIT() SET_OUTPUT(E1_ENABLE_PIN) #define E1_ENABLE_WRITE(STATE) WRITE(E1_ENABLE_PIN,STATE) - #define E1_ENABLE_READ() READ(E1_ENABLE_PIN) + #define E1_ENABLE_READ() bool(READ(E1_ENABLE_PIN)) #endif #ifndef E1_DIR_INIT #define E1_DIR_INIT() SET_OUTPUT(E1_DIR_PIN) #define E1_DIR_WRITE(STATE) WRITE(E1_DIR_PIN,STATE) - #define E1_DIR_READ() READ(E1_DIR_PIN) + #define E1_DIR_READ() bool(READ(E1_DIR_PIN)) #endif #define E1_STEP_INIT() SET_OUTPUT(E1_STEP_PIN) #ifndef E1_STEP_WRITE #define E1_STEP_WRITE(STATE) WRITE(E1_STEP_PIN,STATE) #endif -#define E1_STEP_READ() READ(E1_STEP_PIN) +#define E1_STEP_READ() bool(READ(E1_STEP_PIN)) // E2 Stepper #ifndef E2_ENABLE_INIT #define E2_ENABLE_INIT() SET_OUTPUT(E2_ENABLE_PIN) #define E2_ENABLE_WRITE(STATE) WRITE(E2_ENABLE_PIN,STATE) - #define E2_ENABLE_READ() READ(E2_ENABLE_PIN) + #define E2_ENABLE_READ() bool(READ(E2_ENABLE_PIN)) #endif #ifndef E2_DIR_INIT #define E2_DIR_INIT() SET_OUTPUT(E2_DIR_PIN) #define E2_DIR_WRITE(STATE) WRITE(E2_DIR_PIN,STATE) - #define E2_DIR_READ() READ(E2_DIR_PIN) + #define E2_DIR_READ() bool(READ(E2_DIR_PIN)) #endif #define E2_STEP_INIT() SET_OUTPUT(E2_STEP_PIN) #ifndef E2_STEP_WRITE #define E2_STEP_WRITE(STATE) WRITE(E2_STEP_PIN,STATE) #endif -#define E2_STEP_READ() READ(E2_STEP_PIN) +#define E2_STEP_READ() bool(READ(E2_STEP_PIN)) // E3 Stepper #ifndef E3_ENABLE_INIT #define E3_ENABLE_INIT() SET_OUTPUT(E3_ENABLE_PIN) #define E3_ENABLE_WRITE(STATE) WRITE(E3_ENABLE_PIN,STATE) - #define E3_ENABLE_READ() READ(E3_ENABLE_PIN) + #define E3_ENABLE_READ() bool(READ(E3_ENABLE_PIN)) #endif #ifndef E3_DIR_INIT #define E3_DIR_INIT() SET_OUTPUT(E3_DIR_PIN) #define E3_DIR_WRITE(STATE) WRITE(E3_DIR_PIN,STATE) - #define E3_DIR_READ() READ(E3_DIR_PIN) + #define E3_DIR_READ() bool(READ(E3_DIR_PIN)) #endif #define E3_STEP_INIT() SET_OUTPUT(E3_STEP_PIN) #ifndef E3_STEP_WRITE #define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE) #endif -#define E3_STEP_READ() READ(E3_STEP_PIN) +#define E3_STEP_READ() bool(READ(E3_STEP_PIN)) // E4 Stepper #ifndef E4_ENABLE_INIT #define E4_ENABLE_INIT() SET_OUTPUT(E4_ENABLE_PIN) #define E4_ENABLE_WRITE(STATE) WRITE(E4_ENABLE_PIN,STATE) - #define E4_ENABLE_READ() READ(E4_ENABLE_PIN) + #define E4_ENABLE_READ() bool(READ(E4_ENABLE_PIN)) #endif #ifndef E4_DIR_INIT #define E4_DIR_INIT() SET_OUTPUT(E4_DIR_PIN) #define E4_DIR_WRITE(STATE) WRITE(E4_DIR_PIN,STATE) - #define E4_DIR_READ() READ(E4_DIR_PIN) + #define E4_DIR_READ() bool(READ(E4_DIR_PIN)) #endif #define E4_STEP_INIT() SET_OUTPUT(E4_STEP_PIN) #ifndef E4_STEP_WRITE #define E4_STEP_WRITE(STATE) WRITE(E4_STEP_PIN,STATE) #endif -#define E4_STEP_READ() READ(E4_STEP_PIN) +#define E4_STEP_READ() bool(READ(E4_STEP_PIN)) // E5 Stepper #ifndef E5_ENABLE_INIT #define E5_ENABLE_INIT() SET_OUTPUT(E5_ENABLE_PIN) #define E5_ENABLE_WRITE(STATE) WRITE(E5_ENABLE_PIN,STATE) - #define E5_ENABLE_READ() READ(E5_ENABLE_PIN) + #define E5_ENABLE_READ() bool(READ(E5_ENABLE_PIN)) #endif #ifndef E5_DIR_INIT #define E5_DIR_INIT() SET_OUTPUT(E5_DIR_PIN) #define E5_DIR_WRITE(STATE) WRITE(E5_DIR_PIN,STATE) - #define E5_DIR_READ() READ(E5_DIR_PIN) + #define E5_DIR_READ() bool(READ(E5_DIR_PIN)) #endif #define E5_STEP_INIT() SET_OUTPUT(E5_STEP_PIN) #ifndef E5_STEP_WRITE #define E5_STEP_WRITE(STATE) WRITE(E5_STEP_PIN,STATE) #endif -#define E5_STEP_READ() READ(E5_STEP_PIN) +#define E5_STEP_READ() bool(READ(E5_STEP_PIN)) /** * Extruder indirection for the single E axis