Print job timer comment changed

Marlin/Configuration.h

@@ -790,7 +790,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/Cartesio/Configuration.h

@@ -789,7 +789,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/Felix/Configuration.h

@@ -773,7 +773,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/Hephestos/Configuration.h

@@ -782,7 +782,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -784,7 +784,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/K8200/Configuration.h

@@ -807,7 +807,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/K8400/Configuration.h

@@ -790,7 +790,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -790,7 +790,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/RigidBot/Configuration.h

@@ -788,7 +788,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/SCARA/Configuration.h

@@ -798,7 +798,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/TAZ4/Configuration.h

@@ -811,7 +811,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/WITBOX/Configuration.h

@@ -782,7 +782,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -790,7 +790,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -885,7 +885,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/delta/generic/Configuration.h

@@ -879,7 +879,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -882,7 +882,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -882,7 +882,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -884,7 +884,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/makibox/Configuration.h

@@ -793,7 +793,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands:

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -784,7 +784,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 // Print job timer
 //
 // Enable this option to automatically start and stop the
-// print job timer when M104 and M109 commands are received.
+// print job timer when M104/M109/M190 commands are received.
+// M104 (extruder without wait) - high temp = none, low temp = stop timer
+// M109 (extruder with wait) - high temp = start timer, low temp = stop timer
+// M190 (bed with wait) - high temp = start timer, low temp = none
 //
 // In all cases the timer can be started and stopped using
 // the following commands: