🔧 Pins for FYSETC Spider King 4.07 (#26461)
This commit is contained in:
ellensp
GitHub
parent
20a26d5053
commit
e41df97c42
|
|
@ -82,14 +82,14 @@
|
|||
// TMC2130 on SPI
|
||||
// SPI Pins (Shared for all drivers)
|
||||
#if ENABLED(TMC_USE_SW_SPI) // Shared with EXP2
|
||||
#ifndef TMC_SW_SCK
|
||||
#define TMC_SW_SCK PB3
|
||||
#ifndef TMC_SPI_SCK
|
||||
#define TMC_SPI_SCK PB3
|
||||
#endif
|
||||
#ifndef TMC_SW_MISO
|
||||
#define TMC_SW_MISO PB4
|
||||
#ifndef TMC_SPI_MISO
|
||||
#define TMC_SPI_MISO PB4
|
||||
#endif
|
||||
#ifndef TMC_SW_MOSI
|
||||
#define TMC_SW_MOSI PB5
|
||||
#ifndef TMC_SPI_MOSI
|
||||
#define TMC_SPI_MOSI PB5
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
|
|||
371
Marlin/src/pins/stm32f4/pins_FYSETC_SPIDER_KING407.h
Normal file
371
Marlin/src/pins/stm32f4/pins_FYSETC_SPIDER_KING407.h
Normal file
|
|
@ -0,0 +1,371 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#if HOTENDS > 5 || E_STEPPERS > 5
|
||||
#error "FYSETC SPIDER KING supports up to 5 hotends / E-steppers."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_INFO_NAME
|
||||
#define BOARD_INFO_NAME "FYSETC SPIDER KING"
|
||||
#endif
|
||||
#ifndef DEFAULT_MACHINE_NAME
|
||||
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
||||
#endif
|
||||
|
||||
//
|
||||
// EEPROM Emulation
|
||||
//
|
||||
#if NO_EEPROM_SELECTED
|
||||
#undef NO_EEPROM_SELECTED
|
||||
//#define FLASH_EEPROM_EMULATION
|
||||
//#define SRAM_EEPROM_EMULATION
|
||||
#define I2C_EEPROM
|
||||
#endif
|
||||
|
||||
#if ENABLED(I2C_EEPROM)
|
||||
#define I2C_EEPROM
|
||||
#define I2C_SCL_PIN PF1
|
||||
#define I2C_SDA_PIN PF0
|
||||
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN PA1
|
||||
|
||||
//
|
||||
// Software SPI pins for TMC2130 stepper drivers
|
||||
//
|
||||
#define TMC_USE_SW_SPI
|
||||
#if ENABLED(TMC_USE_SW_SPI)
|
||||
#ifndef TMC_SPI_MOSI
|
||||
#define TMC_SPI_MOSI PE14
|
||||
#endif
|
||||
#ifndef TMC_SPI_MISO
|
||||
#define TMC_SPI_MISO PE13
|
||||
#endif
|
||||
#ifndef TMC_SPI_SCK
|
||||
#define TMC_SPI_SCK PE12
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN PC5
|
||||
#define Y_MIN_PIN PC4
|
||||
#define Z_MIN_PIN PB6
|
||||
#define X_MAX_PIN PB5
|
||||
#define Y_MAX_PIN PF13
|
||||
#define Z_MAX_PIN PF14
|
||||
|
||||
#ifndef Z_MIN_PROBE_PIN
|
||||
#define Z_MIN_PROBE_PIN PA0
|
||||
#endif
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN PG7 // "MOT1"
|
||||
#define X_DIR_PIN PG6
|
||||
#define X_ENABLE_PIN PE11
|
||||
#define X_CS_PIN PD2
|
||||
|
||||
#define X2_STEP_PIN PD11 // "MOT2"
|
||||
#define X2_DIR_PIN PD10
|
||||
#define X2_ENABLE_PIN PG10
|
||||
#define X2_CS_PIN PE15
|
||||
|
||||
#define Y_STEP_PIN PG14 // "MOT3"
|
||||
#define Y_DIR_PIN PG12
|
||||
#define Y_ENABLE_PIN PG15
|
||||
#define Y_CS_PIN PD8
|
||||
|
||||
#define Z_STEP_PIN PD4 // "MOT4"
|
||||
#define Z_DIR_PIN PD6
|
||||
#define Z_ENABLE_PIN PD5
|
||||
#define Z_CS_PIN PD7
|
||||
|
||||
#define Z2_STEP_PIN PE5 // "MOT5"
|
||||
#define Z2_DIR_PIN PC13
|
||||
#define Z2_ENABLE_PIN PE6
|
||||
#define Z2_CS_PIN PC14
|
||||
|
||||
#define E0_STEP_PIN PE3 // "MOT6"
|
||||
#define E0_DIR_PIN PE4
|
||||
#define E0_ENABLE_PIN PE2
|
||||
#define E0_CS_PIN PC15
|
||||
|
||||
#define E1_STEP_PIN PG13 // "MOT7"
|
||||
#define E1_DIR_PIN PG8
|
||||
#define E1_ENABLE_PIN PG9
|
||||
#define E1_CS_PIN PG3
|
||||
|
||||
#define E2_STEP_PIN PE1 // "MOT8"
|
||||
#define E2_DIR_PIN PE0
|
||||
#define E2_ENABLE_PIN PB2
|
||||
#define E2_CS_PIN PD9
|
||||
|
||||
#define E3_STEP_PIN PF4 // "MOT9"
|
||||
#define E3_DIR_PIN PF3
|
||||
#define E3_ENABLE_PIN PF2
|
||||
#define E3_CS_PIN PF5
|
||||
|
||||
#define E4_STEP_PIN PF15 // "MOT10"
|
||||
#define E4_DIR_PIN PG0
|
||||
#define E4_ENABLE_PIN PG5
|
||||
#define E4_CS_PIN PG11
|
||||
|
||||
#if HAS_TMC_UART
|
||||
//
|
||||
// TMC2208/TMC2209 stepper drivers
|
||||
//
|
||||
#define X_SERIAL_TX_PIN PD2
|
||||
#define X_SERIAL_RX_PIN PD2
|
||||
|
||||
#define X2_SERIAL_TX_PIN PE15
|
||||
#define X2_SERIAL_RX_PIN PE15
|
||||
|
||||
#define Y_SERIAL_TX_PIN PD8
|
||||
#define Y_SERIAL_RX_PIN PD8
|
||||
|
||||
#define Z_SERIAL_TX_PIN PD7
|
||||
#define Z_SERIAL_RX_PIN PD7
|
||||
|
||||
#define Z2_SERIAL_TX_PIN PC14
|
||||
#define Z2_SERIAL_RX_PIN PC14
|
||||
|
||||
#define E0_SERIAL_TX_PIN PC15
|
||||
#define E0_SERIAL_RX_PIN PC15
|
||||
|
||||
#define E1_SERIAL_TX_PIN PG3
|
||||
#define E1_SERIAL_RX_PIN PG3
|
||||
|
||||
#define E2_SERIAL_TX_PIN PD9
|
||||
#define E2_SERIAL_RX_PIN PD9
|
||||
|
||||
#define E3_SERIAL_TX_PIN PF5
|
||||
#define E3_SERIAL_RX_PIN PF5
|
||||
|
||||
#define E4_SERIAL_TX_PIN PG11
|
||||
#define E4_SERIAL_RX_PIN PG11
|
||||
|
||||
// Reduce baud rate to improve software serial reliability
|
||||
#define TMC_BAUD_RATE 19200
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN PC1
|
||||
#define TEMP_1_PIN PF9
|
||||
#define TEMP_2_PIN PC3
|
||||
#define TEMP_3_PIN PC2
|
||||
#define TEMP_4_PIN PC0
|
||||
//#define TEMP_CHAMBER_PIN PC0
|
||||
#ifndef TEMP_BED_PIN
|
||||
#define TEMP_BED_PIN PF10
|
||||
#endif
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#ifndef HEATER_0_PIN
|
||||
#define HEATER_0_PIN PB4
|
||||
#endif
|
||||
#ifndef HEATER_1_PIN
|
||||
#define HEATER_1_PIN PB0
|
||||
#endif
|
||||
#ifndef HEATER_2_PIN
|
||||
#define HEATER_2_PIN PD13
|
||||
#endif
|
||||
#ifndef HEATER_3_PIN
|
||||
#define HEATER_3_PIN PC8
|
||||
#endif
|
||||
#ifndef HEATER_4_PIN
|
||||
#define HEATER_4_PIN PA15
|
||||
#endif
|
||||
#ifndef HEATER_BED_PIN
|
||||
#define HEATER_BED_PIN PE10
|
||||
#endif
|
||||
|
||||
#ifndef FAN0_PIN
|
||||
#define FAN0_PIN PE8
|
||||
#endif
|
||||
#ifndef FAN1_PIN
|
||||
#define FAN1_PIN PE9
|
||||
#endif
|
||||
#ifndef FAN2_PIN
|
||||
#define FAN2_PIN PD15
|
||||
#endif
|
||||
#ifndef FAN3_PIN
|
||||
#define FAN3_PIN PD12
|
||||
#endif
|
||||
#ifndef FAN4_PIN
|
||||
#define FAN4_PIN PD14
|
||||
#endif
|
||||
|
||||
/**
|
||||
* ------ ------ ------
|
||||
* PA2 |10 9 | PA3 PA6 |10 9 | PA5 PC9 |10 9 | PA8
|
||||
* -1 | 8 7 | PB10 PC6 | 8 7 | PA4 PC12 | 8 7 | PD0
|
||||
* PA6 6 5 | PA7 PC7 | 6 5 PA7 PC10 | 6 5 PC11
|
||||
* PA5 | 4 3 | PA4 PB10 | 4 3 | RESET PG4 | 4 3 | PE7
|
||||
* GND | 2 1 | 5V GND | 2 1 | 5V GND | 2 1 | 5V
|
||||
* ------ ------ ------
|
||||
* EXP3 EXP2 EXP1
|
||||
*/
|
||||
#define EXP1_03_PIN PE7 // LCD_D7
|
||||
#define EXP1_04_PIN PG4 // LCD_D6
|
||||
#define EXP1_05_PIN PC11 // LCD_D5
|
||||
#define EXP1_06_PIN PC10 // LCD_D4
|
||||
#define EXP1_07_PIN PD0 // LCD_RS
|
||||
#define EXP1_08_PIN PC12 // LCD_EN
|
||||
#define EXP1_09_PIN PA8 // BTN_ENC
|
||||
#define EXP1_10_PIN PC9 // BEEP
|
||||
|
||||
#define EXP2_03_PIN -1 // RESET
|
||||
#define EXP2_04_PIN PB10 // CD
|
||||
#define EXP2_05_PIN PA7 // MOSI
|
||||
#define EXP2_06_PIN PC7 // BTN_EN2
|
||||
#define EXP2_07_PIN PA4 // SS
|
||||
#define EXP2_08_PIN PC6 // BTN_EN1
|
||||
#define EXP2_09_PIN PA5 // SCK
|
||||
#define EXP2_10_PIN PA6 // MISO
|
||||
|
||||
#define EXP3_03_PIN PA4 // SS
|
||||
#define EXP3_04_PIN PA5 // SCK
|
||||
#define EXP3_05_PIN PA7 // MOSI
|
||||
#define EXP3_06_PIN PA6 // MISO
|
||||
#define EXP3_07_PIN PB10 // CD
|
||||
#define EXP3_08_PIN -1 // 3V3
|
||||
#define EXP3_09_PIN PA3 // LCD_RX/RX
|
||||
#define EXP3_10_PIN PA2 // LCD_TX/TX
|
||||
|
||||
//
|
||||
// SPI / SD Card
|
||||
//
|
||||
#define SD_SCK_PIN EXP2_09_PIN
|
||||
#define SD_MISO_PIN EXP2_10_PIN
|
||||
#define SD_MOSI_PIN EXP2_05_PIN
|
||||
|
||||
#define SDSS EXP2_07_PIN
|
||||
#define SD_DETECT_PIN EXP2_04_PIN
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#if ENABLED(FYSETC_242_OLED_12864)
|
||||
|
||||
#define BEEPER_PIN EXP2_08_PIN
|
||||
|
||||
#define BTN_EN1 EXP1_10_PIN
|
||||
#define BTN_EN2 EXP1_03_PIN
|
||||
#define BTN_ENC EXP1_09_PIN
|
||||
|
||||
#define LCD_PINS_DC EXP1_05_PIN
|
||||
#define LCD_PINS_RS EXP2_06_PIN // LCD_RST
|
||||
#define DOGLCD_CS EXP1_07_PIN
|
||||
#define DOGLCD_MOSI EXP1_06_PIN
|
||||
#define DOGLCD_SCK EXP1_08_PIN
|
||||
#define DOGLCD_A0 LCD_PINS_DC
|
||||
#define FORCE_SOFT_SPI
|
||||
|
||||
//#define KILL_PIN -1 // NC
|
||||
#define NEOPIXEL_PIN EXP1_04_PIN
|
||||
|
||||
#elif HAS_WIRED_LCD
|
||||
|
||||
#define BEEPER_PIN EXP1_10_PIN
|
||||
#define BTN_ENC EXP1_09_PIN
|
||||
|
||||
#define LCD_PINS_RS EXP1_07_PIN
|
||||
|
||||
#define BTN_EN1 EXP2_08_PIN
|
||||
#define BTN_EN2 EXP2_06_PIN
|
||||
|
||||
#define LCD_SDSS EXP2_07_PIN
|
||||
|
||||
#define LCD_PINS_ENABLE EXP1_08_PIN
|
||||
#define LCD_PINS_D4 EXP1_06_PIN
|
||||
|
||||
#if ENABLED(FYSETC_MINI_12864)
|
||||
// See https://wiki.fysetc.com/Mini12864_Panel
|
||||
#define DOGLCD_CS EXP1_08_PIN
|
||||
#define DOGLCD_A0 EXP1_07_PIN
|
||||
#if ENABLED(FYSETC_GENERIC_12864_1_1)
|
||||
#define LCD_BACKLIGHT_PIN EXP1_04_PIN
|
||||
#endif
|
||||
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
|
||||
#if ANY(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
||||
#ifndef RGB_LED_R_PIN
|
||||
#define RGB_LED_R_PIN EXP1_05_PIN
|
||||
#endif
|
||||
#ifndef RGB_LED_G_PIN
|
||||
#define RGB_LED_G_PIN EXP1_04_PIN
|
||||
#endif
|
||||
#ifndef RGB_LED_B_PIN
|
||||
#define RGB_LED_B_PIN EXP1_03_PIN
|
||||
#endif
|
||||
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
||||
#define NEOPIXEL_PIN EXP1_05_PIN
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if IS_ULTIPANEL
|
||||
#define LCD_PINS_D5 EXP1_05_PIN
|
||||
#define LCD_PINS_D6 EXP1_04_PIN
|
||||
#define LCD_PINS_D7 EXP1_03_PIN
|
||||
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // HAS_WIRED_LCD
|
||||
|
||||
// Alter timing for graphical display
|
||||
#if IS_U8GLIB_ST7920
|
||||
#define BOARD_ST7920_DELAY_1 96
|
||||
#define BOARD_ST7920_DELAY_2 48
|
||||
#define BOARD_ST7920_DELAY_3 640
|
||||
#endif
|
||||
|
||||
//
|
||||
// Wifi module
|
||||
//
|
||||
#define ESP_WIFI_MODULE_COM 1 // Set either SERIAL_PORT or SERIAL_PORT_2 to this
|
||||
#define ESP_WIFI_MODULE_BAUDRATE BAUDRATE // Use the same BAUDRATE as SERIAL_PORT or SERIAL_PORT_2
|
||||
#define ESP_WIFI_MODULE_RESET_PIN PB3
|
||||
#define ESP_WIFI_MODULE_ENABLE_PIN PD1 // PC8
|
||||
#define ESP_WIFI_MODULE_GPIO0_PIN PG2 // PB4
|
||||
#define ESP_WIFI_MODULE_GPIO4_PIN PG1 // PB7
|
||||
|
||||
//
|
||||
// NeoPixel LED
|
||||
//
|
||||
#ifndef NEOPIXEL_PIN
|
||||
#define NEOPIXEL_PIN PD3
|
||||
#endif
|
||||
Loading…
Reference in a new issue