diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 020907fe87..629ae73431 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -460,6 +460,7 @@ #define BOARD_BLACKPILL_CUSTOM 5246 // Custom board based on STM32F401CDU6. #define BOARD_I3DBEEZ9_V1 5247 // I3DBEEZ9 V1 (STM32F407ZG) #define BOARD_MELLOW_FLY_E3_V2 5248 // Mellow Fly E3 V2 (STM32F407VG) +#define BOARD_FYSETC_CHEETAH_V30 5249 // FYSETC Cheetah V3.0 (STM32F446RC) // // ARM Cortex-M7 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 5737f3eea0..d3f30e0e3f 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -774,6 +774,8 @@ #include "stm32f4/pins_ANET_ET4P.h" // STM32F4 env:Anet_ET4_no_bootloader env:Anet_ET4_OpenBLT #elif MB(FYSETC_CHEETAH_V20) #include "stm32f4/pins_FYSETC_CHEETAH_V20.h" // STM32F4 env:FYSETC_CHEETAH_V20 +#elif MB(FYSETC_CHEETAH_V30) + #include "stm32f4/pins_FYSETC_CHEETAH_V30.h" // STM32F4 env:FYSETC_CHEETAH_V30 #elif MB(MKS_MONSTER8_V1) #include "stm32f4/pins_MKS_MONSTER8_V1.h" // STM32F4 env:mks_monster8 env:mks_monster8_usb_flash_drive env:mks_monster8_usb_flash_drive_msc #elif MB(MKS_MONSTER8_V2) diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V30.h b/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V30.h new file mode 100644 index 0000000000..1b74fcbd86 --- /dev/null +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V30.h @@ -0,0 +1,319 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "env_validate.h" + +#define BOARD_INFO_NAME "FYSETC Cheetah V3.0" +#define BOARD_WEBSITE_URL "fysetc.com" + +// USB Flash Drive support +//#define HAS_OTG_USB_HOST_SUPPORT + +// Ignore temp readings during development. +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 + +#if ANY(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION) + #define FLASH_EEPROM_EMULATION + #define FLASH_EEPROM_LEVELING + +#endif + +// +// Z Probe +// +//#if ENABLED(BLTOUCH) +// #error "You need to set jumper to 5V for BLTouch, then comment out this line to proceed." +// #define SERVO0_PIN PA0 +//#elif !defined(Z_MIN_PROBE_PIN) +// #define Z_MIN_PROBE_PIN PA0 +//#endif + +// +// Limit Switches +// +#define X_STOP_PIN PA2 +#define Y_STOP_PIN PA3 +#define Z_STOP_PIN PC4 + +#if 1 +#define TEST_IO1 PA0 // PROBE +#define TEST_IO2 PA1 // FIL-D +//#define TEST_IO3 PA9 +//#define TEST_IO4 PA10 +#endif + +// +// Filament runout +// +//#define FIL_RUNOUT_PIN PA1 + +// +// Steppers +// +#define X_STEP_PIN PC0 +#define X_DIR_PIN PC1 +#define X_ENABLE_PIN PC3 + +#define Y_STEP_PIN PC14 +#define Y_DIR_PIN PC13 +#define Y_ENABLE_PIN PC15 + +#define Z_STEP_PIN PB4 +#define Z_DIR_PIN PB5 +#define Z_ENABLE_PIN PC2 + +#define E0_STEP_PIN PB2 +#define E0_DIR_PIN PA15 +#define E0_ENABLE_PIN PD2 + +#if HAS_TMC_UART + #if 1 + #ifndef X_SERIAL_TX_PIN + #define X_SERIAL_TX_PIN PB3 + #endif + #ifndef X_SERIAL_RX_PIN + #define X_SERIAL_RX_PIN X_SERIAL_TX_PIN + #endif + + #ifndef Y_SERIAL_TX_PIN + #define Y_SERIAL_TX_PIN PB3 + #endif + #ifndef Y_SERIAL_RX_PIN + #define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN + #endif + + #ifndef Z_SERIAL_TX_PIN + #define Z_SERIAL_TX_PIN PB3 + #endif + #ifndef Z_SERIAL_RX_PIN + #define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN + #endif + #ifndef E0_SERIAL_TX_PIN + #define E0_SERIAL_TX_PIN PB3 + #endif + #ifndef E0_SERIAL_RX_PIN + #define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN + #endif + + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 2 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 1 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif + #else + #define X_HARDWARE_SERIAL Serial2 + #define Y_HARDWARE_SERIAL Serial2 + #define Z_HARDWARE_SERIAL Serial2 + #define E0_HARDWARE_SERIAL Serial2 + + // Default TMC slave addresses + #ifndef X_SLAVE_ADDRESS + #define X_SLAVE_ADDRESS 0 + #endif + #ifndef Y_SLAVE_ADDRESS + #define Y_SLAVE_ADDRESS 2 + #endif + #ifndef Z_SLAVE_ADDRESS + #define Z_SLAVE_ADDRESS 1 + #endif + #ifndef E0_SLAVE_ADDRESS + #define E0_SLAVE_ADDRESS 3 + #endif + #endif +#endif + +// +// Heaters / Fans +// +#define HEATER_0_PIN PC7 // PWM +#define HEATER_BED_PIN PC8 // PWM + +#ifndef FAN0_PIN + #define FAN0_PIN PA14 +#endif +#define FAN1_PIN PA13 +#define FAN2_PIN PA8 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PC5 // Analog Input T0 ADC +#define TEMP_BED_PIN PB1 // Analog Input ADC +#define TEMP_CHAMBER_PIN PB0 // Analog Input T1 ADC + +// +// Misc. Functions +// +#if 0 + #define SDSS PA4 + #define SD_DETECT_PIN PC3 +#endif + +#ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN PB0 +#endif +#ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN PB7 +#endif +#ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN PB6 +#endif + +/** + * ----- ----- + * (KILL?) 5V | 1 2 | GND 5V | 1 2 | GND + * (RST) RESET | 3 4 | PC12 ((SD_DET?)CD) (LCD_D7 BLUE) PB7 | 3 4 | PB6 (LCD_D6 GREEN) + * ((SD?)MOSI PA7 | 5 6 | PC11 (BTN_EN2) (LCD_D5 RED DIN) PB14 | 5 6 | PB13 (LCD_D4 LCD_RST) + * ((SD?)SS) PA4 | 7 8 | PC10 (BTN_EN1) (LCD_RS LCD_A0) PB12 | 7 8 | PB15 (LCD_EN LCD CS) + * ((SD?)SCK) PA5 | 9 10| PA6 ((SD?)MISO) (BTN_ENC) PC6 | 9 10| PB10 (BEEPER) + * ----- ----- + * EXP2 EXP1 + */ + +/** + * ----- + * (BEEPER) PC9 | 1 2 | PC12 (BTN_ENC) + * (BTN_EN1) PC10 | 3 4 | PB14 (LCD_D5/MISO) + * (BTN_EN2) PC11 5 6 | PB13 (LCD_D4/SCK) + * (LCD_RS) PB12 | 7 8 | PB15 (LCD_EN/MOSI) + * GND | 9 10| 5V + * ----- + * EXP3 + */ + +#define EXP1_03_PIN PB7 +#define EXP1_04_PIN PB6 +#define EXP1_05_PIN PB14 +#define EXP1_06_PIN PB13 +#define EXP1_07_PIN PB12 +#define EXP1_08_PIN PB15 +#define EXP1_09_PIN PC6 +#define EXP1_10_PIN PB10 + +#define EXP2_03_PIN -1 // RESET +#define EXP2_04_PIN PC12 +#define EXP2_05_PIN PA7 +#define EXP2_06_PIN PC11 +#define EXP2_07_PIN PA4 +#define EXP2_08_PIN PC10 +#define EXP2_09_PIN PA5 +#define EXP2_10_PIN PA6 + +// +// SPI / SD Card +// +#define SD_SCK_PIN EXP2_09_PIN +#define SD_MISO_PIN EXP2_10_PIN +#define SD_MOSI_PIN EXP2_05_PIN + +#define SDSS EXP2_07_PIN +#define SD_DETECT_PIN EXP2_04_PIN + +#if HAS_WIRED_LCD + + #define BEEPER_PIN EXP1_10_PIN + #define BTN_ENC EXP1_09_PIN + + #if ENABLED(CR10_STOCKDISPLAY) + + #define LCD_PINS_RS EXP1_07_PIN + + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN + + #define LCD_PINS_EN EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN + + #elif ENABLED(MKS_MINI_12864) + + #define DOGLCD_A0 EXP1_04_PIN + #define DOGLCD_CS EXP1_05_PIN + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN + + #else + + #define LCD_PINS_RS EXP1_07_PIN + + #define BTN_EN1 EXP2_06_PIN + #define BTN_EN2 EXP2_08_PIN + + #define LCD_PINS_EN EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN + + #if ENABLED(FYSETC_MINI_12864) + #define DOGLCD_CS EXP1_08_PIN + #define DOGLCD_A0 EXP1_07_PIN + //#define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally. + #if ANY(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) + #ifndef RGB_LED_R_PIN + #define RGB_LED_R_PIN EXP1_05_PIN + #endif + #ifndef RGB_LED_G_PIN + #define RGB_LED_G_PIN EXP1_04_PIN + #endif + #ifndef RGB_LED_B_PIN + #define RGB_LED_B_PIN EXP1_03_PIN + #endif + #elif ENABLED(FYSETC_MINI_12864_2_1) + #define NEOPIXEL_PIN EXP1_05_PIN + #endif + #endif // !FYSETC_MINI_12864 + + #if IS_ULTIPANEL + #define LCD_PINS_D5 EXP1_05_PIN + #define LCD_PINS_D6 EXP1_04_PIN + #define LCD_PINS_D7 EXP1_03_PIN + + #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) + #define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder + #endif + + #endif + + #endif + +#endif // HAS_WIRED_LCD + +// Alter timing for graphical display +#if ENABLED(U8GLIB_ST7920) + #define BOARD_ST7920_DELAY_1 96 + #define BOARD_ST7920_DELAY_2 48 + #define BOARD_ST7920_DELAY_3 600 +#endif + +#if ENABLED(TOUCH_UI_FTDI_EVE) + #define BEEPER_PIN EXP1_10_PIN + #define CLCD_MOD_RESET EXP2_08_PIN + #define CLCD_SPI_CS EXP2_06_PIN +#endif + +#define NEOPIXEL2_PIN PC9 diff --git a/buildroot/share/PlatformIO/boards/marlin_FYSETC_CHEETAH_V30.json b/buildroot/share/PlatformIO/boards/marlin_FYSETC_CHEETAH_V30.json new file mode 100644 index 0000000000..8c46404f38 --- /dev/null +++ b/buildroot/share/PlatformIO/boards/marlin_FYSETC_CHEETAH_V30.json @@ -0,0 +1,35 @@ +{ + "build": { + "cpu": "cortex-m4", + "extra_flags": "-DSTM32F446xx", + "f_cpu": "180000000L", + "mcu": "stm32f446ret6", + "variant": "MARLIN_F446VE" + }, + "connectivity": [ + "can" + ], + "debug": { + "jlink_device": "STM32F446RE", + "openocd_target": "stm32f4x", + "svd_path": "STM32F446x.svd" + }, + "frameworks": [ + "arduino", + "stm32cube" + ], + "name": "3D Printer control board", + "upload": { + "maximum_ram_size": 131072, + "maximum_size": 524288, + "protocol": "stlink", + "protocols": [ + "jlink", + "stlink", + "blackmagic", + "serial" + ] + }, + "url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html", + "vendor": "FYSETC" +} diff --git a/ini/stm32f4.ini b/ini/stm32f4.ini index 454337295d..20009c8943 100644 --- a/ini/stm32f4.ini +++ b/ini/stm32f4.ini @@ -38,6 +38,17 @@ board_build.offset = 0x8000 build_flags = ${stm32_variant.build_flags} -DSTM32F401xC upload_command = dfu-util -a 0 -s 0x08008000:leave -D "$SOURCE" +# +# STM32F446RC nobootloader +# +[env:FYSETC_CHEETAH_V30] +extends = stm32_variant +board = marlin_FYSETC_CHEETAH_V30 +build_flags = ${stm32_variant.build_flags} -DHAL_PCD_MODULE_ENABLED +debug_tool = stlink +upload_protocol = dfu +upload_command = dfu-util -a 0 -s 0x08000000:leave -D "$SOURCE" + # # FLYF407ZG #