Fix 'echo:' in TMC parameters M503 report (#15193)

Marlin/src/module/configuration_store.cpp

@@ -2585,17 +2585,18 @@ void MarlinSettings::reset() {
   #if HAS_TRINAMIC
     inline void say_M906(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM("  M906"); }
     #if HAS_STEALTHCHOP
-      void say_M569(const char * const etc=nullptr) {
+      void say_M569(const bool forReplay, const char * const etc=nullptr, const bool newLine = false) {
+        CONFIG_ECHO_START();
         SERIAL_ECHOPGM("  M569 S1");
         if (etc) {
           SERIAL_CHAR(' ');
           serialprintPGM(etc);
-          SERIAL_EOL();
         }
+        if (newLine) SERIAL_EOL();
       }
     #endif
     #if ENABLED(HYBRID_THRESHOLD)
-      inline void say_M913() { SERIAL_ECHOPGM("  M913"); }
+      inline void say_M913(const bool forReplay) { CONFIG_ECHO_START(); SERIAL_ECHOPGM("  M913"); }
     #endif
     #if USE_SENSORLESS
       inline void say_M914() { SERIAL_ECHOPGM("  M914"); }
@@ -3168,9 +3169,8 @@ void MarlinSettings::reset() {
        */
       #if ENABLED(HYBRID_THRESHOLD)
         CONFIG_ECHO_HEADING("Hybrid Threshold:");
-        CONFIG_ECHO_START();
         #if AXIS_HAS_STEALTHCHOP(X) || AXIS_HAS_STEALTHCHOP(Y) || AXIS_HAS_STEALTHCHOP(Z)
-          say_M913();
+          say_M913(forReplay);
         #endif
         #if AXIS_HAS_STEALTHCHOP(X)
           SERIAL_ECHOPAIR(" X", stepperX.get_pwm_thrs());
@@ -3186,7 +3186,7 @@ void MarlinSettings::reset() {
         #endif
 
         #if AXIS_HAS_STEALTHCHOP(X2) || AXIS_HAS_STEALTHCHOP(Y2) || AXIS_HAS_STEALTHCHOP(Z2)
-          say_M913();
+          say_M913(forReplay);
           SERIAL_ECHOPGM(" I1");
         #endif
         #if AXIS_HAS_STEALTHCHOP(X2)
@@ -3203,32 +3203,32 @@ void MarlinSettings::reset() {
         #endif
 
         #if AXIS_HAS_STEALTHCHOP(Z3)
-          say_M913();
+          say_M913(forReplay);
           SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.get_pwm_thrs());
         #endif
 
         #if AXIS_HAS_STEALTHCHOP(E0)
-          say_M913();
+          say_M913(forReplay);
           SERIAL_ECHOLNPAIR(" T0 E", stepperE0.get_pwm_thrs());
         #endif
         #if AXIS_HAS_STEALTHCHOP(E1)
-          say_M913();
+          say_M913(forReplay);
           SERIAL_ECHOLNPAIR(" T1 E", stepperE1.get_pwm_thrs());
         #endif
         #if AXIS_HAS_STEALTHCHOP(E2)
-          say_M913();
+          say_M913(forReplay);
           SERIAL_ECHOLNPAIR(" T2 E", stepperE2.get_pwm_thrs());
         #endif
         #if AXIS_HAS_STEALTHCHOP(E3)
-          say_M913();
+          say_M913(forReplay);
           SERIAL_ECHOLNPAIR(" T3 E", stepperE3.get_pwm_thrs());
         #endif
         #if AXIS_HAS_STEALTHCHOP(E4)
-          say_M913();
+          say_M913(forReplay);
           SERIAL_ECHOLNPAIR(" T4 E", stepperE4.get_pwm_thrs());
         #endif
         #if AXIS_HAS_STEALTHCHOP(E5)
-          say_M913();
+          say_M913(forReplay);
           SERIAL_ECHOLNPAIR(" T5 E", stepperE5.get_pwm_thrs());
         #endif
         SERIAL_EOL();
@@ -3239,8 +3239,8 @@ void MarlinSettings::reset() {
        */
       #if USE_SENSORLESS
         CONFIG_ECHO_HEADING("StallGuard threshold:");
-        CONFIG_ECHO_START();
         #if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS
+          CONFIG_ECHO_START();
           say_M914();
           #if X_SENSORLESS
             SERIAL_ECHOPAIR(" X", stepperX.homing_threshold());
@@ -3259,6 +3259,7 @@ void MarlinSettings::reset() {
         #define HAS_Z2_SENSORLESS (defined(Z_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z2))
         #define HAS_Z3_SENSORLESS (defined(Z_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z3))
         #if HAS_X2_SENSORLESS || HAS_Y2_SENSORLESS || HAS_Z2_SENSORLESS
+          CONFIG_ECHO_START();
           say_M914();
           SERIAL_ECHOPGM(" I1");
           #if HAS_X2_SENSORLESS
@@ -3274,6 +3275,7 @@ void MarlinSettings::reset() {
         #endif
 
         #if HAS_Z3_SENSORLESS
+          CONFIG_ECHO_START();
           say_M914();
           SERIAL_ECHOLNPAIR(" I2 Z", stepperZ3.homing_threshold());
         #endif
@@ -3285,7 +3287,6 @@ void MarlinSettings::reset() {
        */
       #if HAS_STEALTHCHOP
         CONFIG_ECHO_HEADING("Driver stepping mode:");
-        CONFIG_ECHO_START();
         #if AXIS_HAS_STEALTHCHOP(X)
           const bool chop_x = stepperX.get_stealthChop_status();
         #else
@@ -3302,11 +3303,13 @@ void MarlinSettings::reset() {
           constexpr bool chop_z = false;
         #endif
 
-        if (chop_x || chop_y || chop_z) say_M569();
+        if (chop_x || chop_y || chop_z) {
+          say_M569(forReplay);
           if (chop_x) SERIAL_ECHOPGM(" X");
           if (chop_y) SERIAL_ECHOPGM(" Y");
           if (chop_z) SERIAL_ECHOPGM(" Z");
-        if (chop_x || chop_y || chop_z) SERIAL_EOL();
+          SERIAL_EOL();
+        }
 
         #if AXIS_HAS_STEALTHCHOP(X2)
           const bool chop_x2 = stepperX2.get_stealthChop_status();
@@ -3324,33 +3327,35 @@ void MarlinSettings::reset() {
           constexpr bool chop_z2 = false;
         #endif
 
-        if (chop_x2 || chop_y2 || chop_z2) say_M569(PSTR("I1"));
+        if (chop_x2 || chop_y2 || chop_z2) {
+          say_M569(forReplay, PSTR("I1"));
           if (chop_x2) SERIAL_ECHOPGM(" X");
           if (chop_y2) SERIAL_ECHOPGM(" Y");
           if (chop_z2) SERIAL_ECHOPGM(" Z");
-        if (chop_x2 || chop_y2 || chop_z2) SERIAL_EOL();
+          SERIAL_EOL();
+        }
 
         #if AXIS_HAS_STEALTHCHOP(Z3)
-          if (stepperZ3.get_stealthChop_status()) { say_M569(PSTR("I2 Z")); }
+          if (stepperZ3.get_stealthChop_status()) { say_M569(forReplay, PSTR("I2 Z"), true); }
         #endif
 
         #if AXIS_HAS_STEALTHCHOP(E0)
-          if (stepperE0.get_stealthChop_status()) { say_M569(PSTR("T0 E")); }
+          if (stepperE0.get_stealthChop_status()) { say_M569(forReplay, PSTR("T0 E"), true); }
         #endif
         #if AXIS_HAS_STEALTHCHOP(E1)
-          if (stepperE1.get_stealthChop_status()) { say_M569(PSTR("T1 E")); }
+          if (stepperE1.get_stealthChop_status()) { say_M569(forReplay, PSTR("T1 E"), true); }
         #endif
         #if AXIS_HAS_STEALTHCHOP(E2)
-          if (stepperE2.get_stealthChop_status()) { say_M569(PSTR("T2 E")); }
+          if (stepperE2.get_stealthChop_status()) { say_M569(forReplay, PSTR("T2 E"), true); }
         #endif
         #if AXIS_HAS_STEALTHCHOP(E3)
-          if (stepperE3.get_stealthChop_status()) { say_M569(PSTR("T3 E")); }
+          if (stepperE3.get_stealthChop_status()) { say_M569(forReplay, PSTR("T3 E"), true); }
         #endif
         #if AXIS_HAS_STEALTHCHOP(E4)
-          if (stepperE4.get_stealthChop_status()) { say_M569(PSTR("T4 E")); }
+          if (stepperE4.get_stealthChop_status()) { say_M569(forReplay, PSTR("T4 E"), true); }
         #endif
         #if AXIS_HAS_STEALTHCHOP(E5)
-          if (stepperE5.get_stealthChop_status()) { say_M569(PSTR("T5 E")); }
+          if (stepperE5.get_stealthChop_status()) { say_M569(forReplay, PSTR("T5 E"), true); }
         #endif
 
       #endif // HAS_STEALTHCHOP