diff --git a/Marlin/pins_AZTEEG_X3.h b/Marlin/pins_AZTEEG_X3.h index 0409d6bd2d..1e8d5ddb56 100644 --- a/Marlin/pins_AZTEEG_X3.h +++ b/Marlin/pins_AZTEEG_X3.h @@ -8,24 +8,24 @@ #if ENABLED(VIKI2) || ENABLED(miniVIKI) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 31 - #define DOGLCD_CS 32 - #define LCD_SCREEN_ROT_180 - - //The encoder and click button - #define BTN_EN1 22 - #define BTN_EN2 7 - #define BTN_ENC 12 //the click switch - - #define SDSS 53 - #define SDCARDDETECT -1 // Pin 49 if using display sd interface - + #define DOGLCD_A0 31 + #define DOGLCD_CS 32 + #define LCD_SCREEN_ROT_180 + + //The encoder and click button + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 12 //the click switch + + #define SDSS 53 + #define SDCARDDETECT -1 // Pin 49 if using display sd interface + #if ENABLED(TEMP_STAT_LEDS) - #define STAT_LED_RED 64 - #define STAT_LED_BLUE 63 + #define STAT_LED_RED 64 + #define STAT_LED_BLUE 63 #endif #elif ENABLED(TEMP_STAT_LEDS) diff --git a/Marlin/pins_MINIRAMBO.h b/Marlin/pins_MINIRAMBO.h index efdac8faf7..8e12cf2a7a 100644 --- a/Marlin/pins_MINIRAMBO.h +++ b/Marlin/pins_MINIRAMBO.h @@ -3,10 +3,10 @@ */ #ifndef __AVR_ATmega2560__ -#error Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu. + #error Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu. #endif -#define LARGE_FLASH true +#define LARGE_FLASH true #undef X_MS1_PIN @@ -20,94 +20,94 @@ #undef E1_MS1_PIN #undef E1_MS2_PIN -#define X_STEP_PIN 37 -#define X_DIR_PIN 48 -#define X_MIN_PIN 12 -#define X_MAX_PIN 30 -#define X_ENABLE_PIN 29 -#define X_MS1_PIN 40 -#define X_MS2_PIN 41 +#define X_STEP_PIN 37 +#define X_DIR_PIN 48 +#define X_MIN_PIN 12 +#define X_MAX_PIN 30 +#define X_ENABLE_PIN 29 +#define X_MS1_PIN 40 +#define X_MS2_PIN 41 -#define Y_STEP_PIN 36 -#define Y_DIR_PIN 49 -#define Y_MIN_PIN 11 -#define Y_MAX_PIN 24 -#define Y_ENABLE_PIN 28 -#define Y_MS1_PIN 69 -#define Y_MS2_PIN 39 +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 49 +#define Y_MIN_PIN 11 +#define Y_MAX_PIN 24 +#define Y_ENABLE_PIN 28 +#define Y_MS1_PIN 69 +#define Y_MS2_PIN 39 -#define Z_STEP_PIN 35 -#define Z_DIR_PIN 47 -#define Z_MIN_PIN 10 -#define Z_MAX_PIN 23 -#define Z_ENABLE_PIN 27 -#define Z_MS1_PIN 68 -#define Z_MS2_PIN 67 +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_MIN_PIN 10 +#define Z_MAX_PIN 23 +#define Z_ENABLE_PIN 27 +#define Z_MS1_PIN 68 +#define Z_MS2_PIN 67 -#define HEATER_BED_PIN 4 -#define TEMP_BED_PIN 2 +#define HEATER_BED_PIN 4 +#define TEMP_BED_PIN 2 -#define HEATER_0_PIN 3 -#define TEMP_0_PIN 0 +#define HEATER_0_PIN 3 +#define TEMP_0_PIN 0 -#define HEATER_1_PIN 7 -#define TEMP_1_PIN 1 +#define HEATER_1_PIN 7 +#define TEMP_1_PIN 1 #if ENABLED(BARICUDA) - #define HEATER_2_PIN 6 + #define HEATER_2_PIN 6 #else - #define HEATER_2_PIN -1 + #define HEATER_2_PIN -1 #endif -#define TEMP_2_PIN -1 +#define TEMP_2_PIN -1 #define E0_STEP_PIN 34 #define E0_DIR_PIN 43 #define E0_ENABLE_PIN 26 -#define E0_MS1_PIN 65 -#define E0_MS2_PIN 66 +#define E0_MS1_PIN 65 +#define E0_MS2_PIN 66 #define E1_STEP_PIN -1 #define E1_DIR_PIN -1 #define E1_ENABLE_PIN -1 -#define E1_MS1_PIN -1 -#define E1_MS2_PIN -1 +#define E1_MS1_PIN -1 +#define E1_MS2_PIN -1 #define MOTOR_CURRENT_PWM_XY_PIN 46 -#define MOTOR_CURRENT_PWM_Z_PIN 45 -#define MOTOR_CURRENT_PWM_E_PIN 44 +#define MOTOR_CURRENT_PWM_Z_PIN 45 +#define MOTOR_CURRENT_PWM_E_PIN 44 //Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range #define MOTOR_CURRENT_PWM_RANGE 2000 #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} -#define SDPOWER -1 -#define SDSS 53 -#define LED_PIN 13 -#define FAN_PIN 8 -#define FAN_1_PIN 6 -#define PS_ON_PIN -1 -#define KILL_PIN -1 //80 with Smart Controller LCD -#define SUICIDE_PIN -1 //PIN that has to be turned on right after start, to keep power flowing. +#define SDPOWER -1 +#define SDSS 53 +#define LED_PIN 13 +#define FAN_PIN 8 +#define FAN_1_PIN 6 +#define PS_ON_PIN -1 +#define KILL_PIN -1 // 80 with Smart Controller LCD +#define SUICIDE_PIN -1 // PIN that has to be turned on right after start, to keep power flowing. #if ENABLED(ULTRA_LCD) - #define KILL_PIN 32 + #define KILL_PIN 32 #if ENABLED(NEWPANEL) - #define BEEPER_PIN 84 // Beeper on AUX-4 - #define LCD_PINS_RS 82 + #define BEEPER_PIN 84 // Beeper on AUX-4 + #define LCD_PINS_RS 82 #define LCD_PINS_ENABLE 18 - #define LCD_PINS_D4 19 - #define LCD_PINS_D5 70 - #define LCD_PINS_D6 85 - #define LCD_PINS_D7 71 + #define LCD_PINS_D4 19 + #define LCD_PINS_D5 70 + #define LCD_PINS_D6 85 + #define LCD_PINS_D7 71 //buttons are directly attached using AUX-2 - #define BTN_EN1 14 - #define BTN_EN2 72 - #define BTN_ENC 9 //the click + #define BTN_EN1 14 + #define BTN_EN2 72 + #define BTN_ENC 9 // the click - #define SDCARDDETECT 15 + #define SDCARDDETECT 15 #endif //NEWPANEL #endif //ULTRA_LCD diff --git a/Marlin/pins_TEENSYLU.h b/Marlin/pins_TEENSYLU.h index f0ed90c375..9d0ff9e3f5 100644 --- a/Marlin/pins_TEENSYLU.h +++ b/Marlin/pins_TEENSYLU.h @@ -69,16 +69,16 @@ #if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) - #define BEEPER_PIN -1 + #define BEEPER_PIN -1 #if ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 27 //RX1 - fastio.h pin mapping 27 - #define BTN_EN2 26 //TX1 - fastio.h pin mapping 26 - #define BTN_ENC 43 //A3 - fastio.h pin mapping 43 - #define SDSS 40 //use SD card on Panelolu2 (Teensyduino pin mapping) + #define BTN_EN1 27 //RX1 - fastio.h pin mapping 27 + #define BTN_EN2 26 //TX1 - fastio.h pin mapping 26 + #define BTN_ENC 43 //A3 - fastio.h pin mapping 43 + #define SDSS 40 //use SD card on Panelolu2 (Teensyduino pin mapping) #endif // LCD_I2C_PANELOLU2 - #define SDCARDDETECT -1 + #define SDCARDDETECT -1 #endif // ULTRA_LCD && NEWPANEL