0x90/Marlin
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

Update readme file

Browse source
This commit is contained in:
Erik van der Zalm 2012-04-15 22:44:03 +02:00
parent c2557abc03
commit ffea8008ca
1 changed files with 13 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

13
README.md
View file

@ -42,6 +42,7 @@ Features:
* Endstop trigger reporting to the host software. * Endstop trigger reporting to the host software.
* Updated sdcardlib * Updated sdcardlib
* Heater power reporting. Useful for PID monitoring. * Heater power reporting. Useful for PID monitoring.
* PID tuning
The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments. The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments.
@ -145,9 +146,14 @@ Movement variables:
* M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec * M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec
* M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate * M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2 also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate
* M220 - set build speed mulitplying S:factor in percent ; aka "realtime tuneing in the gcode". So you can slow down if you have islands in one height-range, and speed up otherwise. * M220 - set build speed mulitplying S:factor in percent ; aka "realtime tuneing in the gcode". So you can slow down if you have islands in one height-range, and speed up otherwise.
* M301 - Set PID parameters P I and D * M221 - set the extrude multiplying S:factor in percent
* M400 - Finish all buffered moves. * M400 - Finish all buffered moves.
Temperature variables:
* M301 - Set PID parameters P I and D
* M302 - Allow cold extrudes
* M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C)
Advance: Advance:
* M200 - Set filament diameter for advance * M200 - Set filament diameter for advance
@ -158,7 +164,12 @@ EEPROM:
* M500 - stores paramters in EEPROM * M500 - stores paramters in EEPROM
* M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). * M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
* M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. * M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
* M503 - print the current settings (from memory not from eeprom)
MISC:
* M240 - Trigger a camera to take a photograph
* M999 - Restart after being stopped by error
Configuring and compilation: Configuring and compilation:
============================ ============================