/* Copyright (c) 2011 Arduino. All right reserved. This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include "pins_arduino.h" #ifdef __cplusplus extern "C" { #endif // Pin number const PinName digitalPin[] = { PA_0, //D0 PA_1, //D1 PA_2, //D2 PA_3, //D3 PA_4, //D4 PA_5, //D5 PA_6, //D6 PA_7, //D7 PA_8, //D8 PA_9, //D9 PA_10, //D10 PA_11, //D11 PA_12, //D12 PA_13, //D13 PA_14, //D14 PA_15, //D15 PB_0, //D16 PB_1, //D17 PB_2, //D18 PB_3, //D19 PB_4, //D20 PB_5, //D21 PB_6, //D22 PB_7, //D23 PB_8, //D24 PB_9, //D25 PB_10, //D26 PB_11, //D27 PB_12, //D28 PB_13, //D29 PB_14, //D30 PB_15, //D31 PC_0, //D32 PC_1, //D33 PC_2, //D34 PC_3, //D35 PC_4, //D36 PC_5, //D37 PC_6, //D38 PC_7, //D39 PC_8, //D40 PC_9, //D41 PC_10, //D42 PC_11, //D43 PC_12, //D44 PC_13, //D45 PC_14, //D46 PC_15, //D47 PD_0, //D48 PD_1, //D49 PD_2, //D50 PD_3, //D51 PD_4, //D52 PD_5, //D53 PD_6, //D54 PD_7, //D55 PD_8, //D56 PD_9, //D57 PD_10, //D58 PD_11, //D59 PD_12, //D60 PD_13, //D61 PD_14, //D62 PD_15, //D63 PE_0, //D64 PE_1, //D65 PE_2, //D66 PE_3, //D67 PE_4, //D68 PE_5, //D69 PE_6, //D70 PE_7, //D71 PE_8, //D72 PE_9, //D73 PE_10, //D74 PE_11, //D75 PE_12, //D76 PE_13, //D77 PE_14, //D78 PE_15, //D79 PF_0, //D80 PF_1, //D81 PF_2, //D82 PF_3, //D83 PF_4, //D84 PF_5, //D85 PF_6, //D86 PF_7, //D87 PF_8, //D88 PF_9, //D89 PF_10, //D90 PF_11, //D91 PF_12, //D92 PF_13, //D93 PF_14, //D94 PF_15, //D95 PG_0, //D96 PG_1, //D97 PG_2, //D98 PG_3, //D99 PG_4, //D100 PG_5, //D101 PG_6, //D102 PG_7, //D103 PG_8, //D104 PG_9, //D105 PG_10, //D106 PG_11, //D107 PG_12, //D108 PG_13, //D109 PG_14, //D110 PG_15, //D111 PH_0, //D112 PH_1, //D113 PH_2, //D114 PH_3, //D115 PH_4, //D116 PH_5, //D117 PH_6, //D118 PH_7, //D119 PH_8, //D120 PH_9, //D121 PH_10, //D122 PH_11, //D123 PH_12, //D124 PH_13, //D125 PH_14, //D126 PH_15, //D127 //Duplicated ADC Pins PC_3, //A0 T0 D128 PC_0, //A1 T1 D129 PC_2, //A2 BED D130 }; #ifdef __cplusplus } #endif // ---------------------------------------------------------------------------- #ifdef __cplusplus extern "C" { #endif uint32_t myvar[] = {1,2,3,4,5,6,7,8}; void myshow(int fre, int times) // YSZ-WORK { uint32_t index = 10; RCC->AHB1ENR |= 1 << 6; // port G clock GPIOG->MODER &= ~(3UL << 2 * index); // clear old mode GPIOG->MODER |= 1 << 2 * index; // mode is output GPIOG->OSPEEDR &= ~(3UL << 2 * index); // Clear old output speed GPIOG->OSPEEDR |= 2 << 2 * index; // Set output speed GPIOG->OTYPER &= ~(1UL << index); // clear old output GPIOG->OTYPER |= 0 << index; // Set the output mode to push-pull GPIOG->PUPDR &= ~(3 << 2 * index); // Clear the original settings first GPIOG->PUPDR |= 1 << 2 * index; // Set new up and down while (times != 0) { GPIOG->BSRR = 1UL << index; for (int i = 0; i < fre; i++) for (int j = 0; j < 1000000; j++) __NOP(); GPIOG->BSRR = 1UL << (index + 16); for (int i = 0; i < fre; i++) for (int j = 0; j < 1000000; j++) __NOP(); if (times > 0) times--; } } HAL_StatusTypeDef SDMMC_IsProgramming(SDIO_TypeDef *SDIOx,uint32_t RCA) { HAL_SD_CardStateTypeDef CardState; volatile uint32_t respR1 = 0, status = 0; SDIO_CmdInitTypeDef sdmmc_cmdinit; do { sdmmc_cmdinit.Argument = RCA << 16; sdmmc_cmdinit.CmdIndex = SDMMC_CMD_SEND_STATUS; sdmmc_cmdinit.Response = SDIO_RESPONSE_SHORT; sdmmc_cmdinit.WaitForInterrupt = SDIO_WAIT_NO; sdmmc_cmdinit.CPSM = SDIO_CPSM_ENABLE; SDIO_SendCommand(SDIOx,&sdmmc_cmdinit); // send CMD13 do status = SDIOx->STA; while (!(status & ((1 << 0) | (1 << 6) | (1 << 2)))); // wait for the operation to complete if (status & (1 << 0)) { // CRC check failed SDIOx->ICR |= 1 << 0; // clear error flag return HAL_ERROR; } if (status & (1 << 2)) { // command timed out SDIOx->ICR |= 1 << 2; // clear error flag return HAL_ERROR; } if (SDIOx->RESPCMD != SDMMC_CMD_SEND_STATUS) return HAL_ERROR; SDIOx->ICR = 0X5FF; // clear all tags respR1 = SDIOx->RESP1; CardState = (respR1 >> 9) & 0x0000000F; } while ((CardState == HAL_SD_CARD_RECEIVING) || (CardState == HAL_SD_CARD_SENDING) || (CardState == HAL_SD_CARD_PROGRAMMING)); return HAL_OK; } void debugStr(const char *str) { while (*str) { while ((USART1->SR & 0x40) == 0); USART1->DR = *str++; } } /** * @brief System Clock Configuration * The system Clock is configured as follows: * System Clock source = PLL (HSE) * SYSCLK(Hz) = 168000000/120000000/180000000 * HCLK(Hz) = 168000000/120000000/180000000 * AHB Prescaler = 1 * APB1 Prescaler = 4 * APB2 Prescaler = 2 * HSE Frequency(Hz) = 8000000 * PLL_M = 8/4/8 * PLL_N = 336/120/360 * PLL_P = 2 * PLL_Q = 7/5/7 * VDD(V) = 3.3 * Main regulator output voltage = Scale1 mode * Flash Latency(WS) = 5 * @param None * @retval None */ WEAK void SystemClock_Config(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct; RCC_OscInitTypeDef RCC_OscInitStruct; RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; HAL_StatusTypeDef ret = HAL_OK; __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); __HAL_FLASH_DATA_CACHE_ENABLE(); __HAL_FLASH_PREFETCH_BUFFER_ENABLE(); HAL_RCC_DeInit(); /* Enable Power Control clock */ __HAL_RCC_PWR_CLK_ENABLE(); /* The voltage scaling allows optimizing the power consumption when the device is clocked below the maximum system frequency, to update the voltage scaling value regarding system frequency refer to product datasheet. */ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); /* Enable HSE Oscillator and activate PLL with HSE as source */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLM = 8; RCC_OscInitStruct.PLL.PLLN = 336; RCC_OscInitStruct.PLL.PLLP = 2; RCC_OscInitStruct.PLL.PLLQ = 7; RCC_OscInitStruct.PLL.PLLR = 2; ret = HAL_RCC_OscConfig(&RCC_OscInitStruct); if (ret != HAL_OK) myshow(10,-1); HAL_PWREx_EnableOverDrive(); /* Select PLLSAI output as USB clock source */ PeriphClkInitStruct.PLLSAI.PLLSAIM = 8; PeriphClkInitStruct.PLLSAI.PLLSAIN = 192; PeriphClkInitStruct.PLLSAI.PLLSAIP = RCC_PLLSAIP_DIV4; PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_CLK48 | RCC_PERIPHCLK_SDIO; PeriphClkInitStruct.Clk48ClockSelection = RCC_CK48CLKSOURCE_PLLSAIP; PeriphClkInitStruct.SdioClockSelection = RCC_SDIOCLKSOURCE_CLK48; // SDIO Clock Mux HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); if (ret != HAL_OK) myshow(10,-1); SystemCoreClockUpdate(); /* Configure the Systick interrupt time */ HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000); /* Configure the Systick */ HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK); /* SysTick_IRQn interrupt configuration */ HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0); __enable_irq(); // Turn on the interrupt here because it is turned off in the bootloader } #ifdef __cplusplus } #endif