| .. |
|
example_configurations
|
Added new feature for AutoParking Extruder (APE)
|
2017-08-16 17:33:11 -05:00 |
|
blinkm.cpp
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
blinkm.h
|
|
|
|
boards.h
|
Support for Geeetech GT2560 Rev.A/Rev.A+
|
2017-08-06 00:42:54 -05:00 |
|
buzzer.h
|
Spacing, const, comments
|
2017-06-07 16:07:38 -05:00 |
|
cardreader.cpp
|
Patch some serial macros
|
2017-06-09 17:17:23 -05:00 |
|
cardreader.h
|
Advanced pause fixes (#7518)
|
2017-08-15 22:57:13 -05:00 |
|
circularqueue.h
|
|
|
|
Conditionals.h
|
|
|
|
Conditionals_LCD.h
|
Implement SERVO_DELAY as array
|
2017-08-15 00:28:47 -05:00 |
|
Conditionals_post.h
|
Added new feature for AutoParking Extruder (APE)
|
2017-08-16 17:33:11 -05:00 |
|
Configuration.h
|
Added new feature for AutoParking Extruder (APE)
|
2017-08-16 17:33:11 -05:00 |
|
Configuration_adv.h
|
Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480)
|
2017-08-10 16:53:04 -05:00 |
|
configuration_store.cpp
|
Added new feature for AutoParking Extruder (APE)
|
2017-08-16 17:33:11 -05:00 |
|
configuration_store.h
|
Expose DISABLE_M503 option as a test option
|
2017-07-01 21:31:28 -05:00 |
|
dac_mcp4728.cpp
|
Fix get/setDrvPct declarations
|
2017-06-09 20:21:28 -07:00 |
|
dac_mcp4728.h
|
Fix get/setDrvPct declarations
|
2017-06-09 20:21:28 -07:00 |
|
digipot_mcp4018.cpp
|
Fix: set digipot mcp4018 Vrefmax to 1.666V
|
2017-06-24 12:35:34 -05:00 |
|
digipot_mcp4451.cpp
|
Apply maths macros and type changes ahead of HAL
|
2017-06-19 22:57:42 -05:00 |
|
dogm_bitmaps.h
|
|
|
|
dogm_font_data_6x9_marlin.h
|
|
|
|
dogm_font_data_HD44780_C.h
|
|
|
|
dogm_font_data_HD44780_J.h
|
|
|
|
dogm_font_data_HD44780_W.h
|
|
|
|
dogm_font_data_ISO10646_1.h
|
|
|
|
dogm_font_data_ISO10646_1_PL.h
|
Polish font
|
2017-04-21 21:42:41 -05:00 |
|
dogm_font_data_ISO10646_1_tr.h
|
Improve M600 with timeout, wait for heatup.
|
2017-02-15 05:29:34 -06:00 |
|
dogm_font_data_ISO10646_5_Cyrillic.h
|
|
|
|
dogm_font_data_ISO10646_CN.h
|
|
|
|
dogm_font_data_ISO10646_CZ.h
|
UTF-8 mapper for Czech
|
2017-07-04 15:51:23 -05:00 |
|
dogm_font_data_ISO10646_Greek.h
|
|
|
|
dogm_font_data_ISO10646_Kana.h
|
|
|
|
dogm_font_data_Marlin_symbols.h
|
|
|
|
duration_t.h
|
Fix formatting of print time hours above one day
|
2017-03-01 18:55:25 +02:00 |
|
endstop_interrupts.h
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
endstops.cpp
|
Prevent damage if DELTA_HEIGHT is incorrect
|
2017-08-11 16:09:14 -05:00 |
|
endstops.h
|
guaranteed BLTouch detection
|
2017-02-11 12:01:34 -06:00 |
|
enum.h
|
CNC workspace planes and 'P' argument for G2/G3
|
2017-06-23 14:53:03 -05:00 |
|
fastio.h
|
Drop fastio timer cruft
|
2017-06-15 14:43:40 -05:00 |
|
fastio_168.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
|
fastio_644.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
|
fastio_1280.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
|
fastio_1281.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
|
fastio_AT90USB.h
|
Tweaks for M43
|
2017-07-06 21:47:50 -05:00 |
|
G26_Mesh_Validation_Tool.cpp
|
Fix for G26 spam output
|
2017-08-15 17:04:53 -06:00 |
|
gcode.cpp
|
Fix compile issue with G38
|
2017-07-06 14:21:27 -05:00 |
|
gcode.h
|
Volatile keyword not needed for parser.seen
|
2017-07-10 15:38:54 -05:00 |
|
hex_print_routines.cpp
|
New GCode Parser - Implementation
|
2017-05-23 14:15:10 -05:00 |
|
hex_print_routines.h
|
New GCode Parser - Implementation
|
2017-05-23 14:15:10 -05:00 |
|
I2CPositionEncoder.cpp
|
Followup for I2C_POSITION_ENCODERS
|
2017-06-27 20:46:40 -05:00 |
|
I2CPositionEncoder.h
|
Followup for I2C_POSITION_ENCODERS
|
2017-06-27 20:46:40 -05:00 |
|
language.h
|
UTF-8 mapper for Czech
|
2017-07-04 15:51:23 -05:00 |
|
language_an.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_bg.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_ca.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_cn.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_cz.h
|
UTF-8 mapper for Czech
|
2017-07-04 15:51:23 -05:00 |
|
language_cz_utf8.h
|
UTF-8 mapper for Czech
|
2017-07-04 15:51:23 -05:00 |
|
language_da.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_de.h
|
Update language_de.h
|
2017-08-04 09:35:21 +02:00 |
|
language_el-gr.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_el.h
|
Use "PSU" label to fit on screen
|
2017-08-16 02:51:00 -05:00 |
|
language_en.h
|
Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16
|
2017-08-16 15:58:15 -05:00 |
|
language_es.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_eu.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_fi.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_fr.h
|
French translation
|
2017-06-22 12:49:23 -05:00 |
|
language_gl.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_hr.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_it.h
|
Fix Italian string length
|
2017-08-10 15:41:35 -05:00 |
|
language_kana.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_kana_utf8.h
|
UTF-8 mapper for Czech
|
2017-07-04 15:51:23 -05:00 |
|
language_nl.h
|
Use "PSU" label to fit on screen
|
2017-08-16 02:51:00 -05:00 |
|
language_pl-DOGM.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_pl-HD44780.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_pl.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_pt-br.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_pt-br_utf8.h
|
UTF-8 mapper for Czech
|
2017-07-04 15:51:23 -05:00 |
|
language_pt.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_pt_utf8.h
|
UTF-8 mapper for Czech
|
2017-07-04 15:51:23 -05:00 |
|
language_ru.h
|
Update Russian Translation
|
2017-08-02 21:19:15 +02:00 |
|
language_test.h
|
MSG_VOLUMETRIC => MSG_FILAMENT
|
2017-04-17 16:39:36 -05:00 |
|
language_tr.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_uk.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_zh_CN.h
|
Rename options with swap_ prefix
|
2017-07-27 04:14:29 -05:00 |
|
language_zh_TW.h
|
Rename options with swap_ prefix
|
2017-07-27 04:14:29 -05:00 |
|
least_squares_fit.cpp
|
Apply coding standards to recent merges
|
2017-07-13 00:46:16 -05:00 |
|
least_squares_fit.h
|
Apply coding standards to recent merges
|
2017-07-13 00:46:16 -05:00 |
|
M100_Free_Mem_Chk.cpp
|
Apply const, spacing, etc.
|
2017-06-27 05:23:49 -05:00 |
|
macros.h
|
Apply maths macros and type changes ahead of HAL
|
2017-06-19 22:57:42 -05:00 |
|
Makefile
|
Added support for U8G.
|
2017-07-27 07:49:25 -06:00 |
|
Marlin.h
|
Rename options with swap_ prefix
|
2017-07-27 04:14:29 -05:00 |
|
Marlin.ino
|
TMC2130 Library: @teemuatlut replaces @makertum
|
2017-03-07 04:22:06 -06:00 |
|
Marlin_main.cpp
|
Added new feature for AutoParking Extruder (APE)
|
2017-08-16 17:33:11 -05:00 |
|
MarlinConfig.h
|
|
|
|
MarlinSerial.cpp
|
Tweak some else clauses
|
2017-06-10 16:40:10 -05:00 |
|
MarlinSerial.h
|
Patch MarlinSerial to match up with 32-bit version
|
2017-04-02 04:39:18 -05:00 |
|
mesh_bed_leveling.cpp
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
mesh_bed_leveling.h
|
Formatting and spelling
|
2017-06-18 23:01:12 -05:00 |
|
nozzle.cpp
|
Apply maths macros and type changes ahead of HAL
|
2017-06-19 22:57:42 -05:00 |
|
nozzle.h
|
Apply maths macros and type changes ahead of HAL
|
2017-06-19 22:57:42 -05:00 |
|
pca9632.cpp
|
Fix hexadecimal number formatting
|
2017-08-14 22:50:44 -05:00 |
|
pca9632.h
|
PCA9632 PWM color LED support
|
2017-06-12 01:09:24 -05:00 |
|
pins.h
|
Support for Geeetech GT2560 Rev.A/Rev.A+
|
2017-08-06 00:42:54 -05:00 |
|
pins_3DRAG.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_5DPRINT.h
|
Remove extraneous USBCON defines for AT90USB boards
|
2017-07-23 16:41:48 -07:00 |
|
pins_ANET_10.h
|
Add Skynet/ANET A10 support
|
2017-06-24 19:07:03 -05:00 |
|
pins_AZTEEG_X1.h
|
|
|
|
pins_AZTEEG_X3.h
|
Cleanup of spacing and formatting
|
2017-06-04 11:31:43 -05:00 |
|
pins_AZTEEG_X3_PRO.h
|
Unify AVR90USB: Pins cleanup
|
2017-06-09 18:48:12 -05:00 |
|
pins_BAM_DICE_DUE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_BQ_ZUM_MEGA_3D.h
|
Add support for BQ heated bed kit with Hephestos 2
|
2017-07-07 03:10:38 -05:00 |
|
pins_BRAINWAVE.h
|
Remove extraneous USBCON defines for AT90USB boards
|
2017-07-23 16:41:48 -07:00 |
|
pins_BRAINWAVE_PRO.h
|
Remove extraneous USBCON defines for AT90USB boards
|
2017-07-23 16:41:48 -07:00 |
|
pins_CHEAPTRONIC.h
|
Assign -1 to LCD_PINS_D4-7 if not defined
|
2017-07-06 22:47:51 -05:00 |
|
pins_CHEAPTRONICv2.h
|
Easier override of FILWIDTH_PIN
|
2017-06-02 12:05:46 -05:00 |
|
pins_CNCONTROLS_11.h
|
|
|
|
pins_CNCONTROLS_12.h
|
|
|
|
pins_ELEFU_3.h
|
|
|
|
pins_FELIX2.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN3_MONOLITHIC.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN3_PLUS.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN6.h
|
Unify AVR90USB: Pins cleanup
|
2017-06-09 18:48:12 -05:00 |
|
pins_GEN6_DELUXE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN7_12.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN7_13.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN7_14.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN7_CUSTOM.h
|
Unify AVR90USB: Pins cleanup
|
2017-06-09 18:48:12 -05:00 |
|
pins_GT2560_REV_A.h
|
Support for Geeetech GT2560 Rev.A/Rev.A+
|
2017-08-06 00:42:54 -05:00 |
|
pins_GT2560_REV_A_PLUS.h
|
Support for Geeetech GT2560 Rev.A/Rev.A+
|
2017-08-06 00:42:54 -05:00 |
|
pins_K8200.h
|
|
|
|
pins_K8400.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_LEAPFROG.h
|
|
|
|
pins_MEGACONTROLLER.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_MEGATRONICS.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_MEGATRONICS_2.h
|
added shift register pins for reprapworld keypad v1.1
|
2017-06-09 14:17:47 +02:00 |
|
pins_MEGATRONICS_3.h
|
Unify AVR90USB: Pins cleanup
|
2017-06-09 18:48:12 -05:00 |
|
pins_MELZI.h
|
#if defined => #ifdef / PIN_EXISTS
|
2017-03-22 20:51:11 -05:00 |
|
pins_MELZI_CREALITY.h
|
Tweak CR-10 config/pins
|
2017-08-11 15:55:31 -05:00 |
|
pins_MELZI_MAKR3D.h
|
Tweak CR-10 config/pins
|
2017-08-11 15:55:31 -05:00 |
|
pins_MIGHTYBOARD_REVE.h
|
Unify AVR90USB: Pins cleanup
|
2017-06-09 18:48:12 -05:00 |
|
pins_MINIRAMBO.h
|
Add support for Průša MK2 Multiplexer
|
2017-06-27 04:55:30 -05:00 |
|
pins_MINITRONICS.h
|
Assign -1 to LCD_PINS_D4-7 if not defined
|
2017-07-06 22:47:51 -05:00 |
|
pins_MKS_13.h
|
MKS 1.3+: Add pin mapping for PS_ON
|
2017-07-21 18:50:05 -05:00 |
|
pins_MKS_BASE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_OMCA.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_OMCA_A.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_PRINTRBOARD.h
|
Remove extraneous USBCON defines for AT90USB boards
|
2017-07-23 16:41:48 -07:00 |
|
pins_PRINTRBOARD_REVF.h
|
Clean up excess whitespace
|
2017-07-06 21:24:30 -05:00 |
|
pins_RAMBO.h
|
Add support for Průša MK2 Multiplexer
|
2017-06-27 04:55:30 -05:00 |
|
pins_RAMPS.h
|
MKS 1.3+: Add pin mapping for PS_ON
|
2017-07-21 18:50:05 -05:00 |
|
pins_RAMPS_13.h
|
|
|
|
pins_RAMPS_OLD.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_RIGIDBOARD.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_RIGIDBOARD_V2.h
|
Need to define this for Rigidboard V2
|
2017-04-30 19:04:27 -05:00 |
|
pins_RUMBA.h
|
Pins-related cleanup, formatting
|
2017-05-21 07:18:03 -05:00 |
|
pins_SAINSMART_2IN1.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_SANGUINOLOLU_11.h
|
Support for Creality CR-10
|
2017-07-06 23:08:10 -05:00 |
|
pins_SANGUINOLOLU_12.h
|
#if defined => #ifdef / PIN_EXISTS
|
2017-03-22 20:51:11 -05:00 |
|
pins_SAV_MKI.h
|
Remove extraneous USBCON defines for AT90USB boards
|
2017-07-23 16:41:48 -07:00 |
|
pins_SCOOVO_X9H.h
|
Unify AVR90USB: Pins cleanup
|
2017-06-09 18:48:12 -05:00 |
|
pins_SETHI.h
|
Formatting adjustments
|
2017-06-15 15:25:24 -05:00 |
|
pins_STB_11.h
|
#if defined => #ifdef / PIN_EXISTS
|
2017-03-22 20:51:11 -05:00 |
|
pins_TEENSY2.h
|
Remove extraneous USBCON defines for AT90USB boards
|
2017-07-23 16:41:48 -07:00 |
|
pins_TEENSYLU.h
|
Remove extraneous USBCON defines for AT90USB boards
|
2017-07-23 16:41:48 -07:00 |
|
pins_ULTIMAIN_2.h
|
Edit digipot currents via LCD, save to EEPROM
|
2017-06-25 01:02:36 -05:00 |
|
pins_ULTIMAKER.h
|
Unify AVR90USB: Pins cleanup
|
2017-06-09 18:48:12 -05:00 |
|
pins_ULTIMAKER_OLD.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_ZRIB_V20.h
|
Support for ZRIB v2.0 Control Board
|
2017-06-02 12:05:46 -05:00 |
|
pinsDebug.h
|
Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug
|
2017-06-27 08:04:40 +01:00 |
|
pinsDebug_list.h
|
Add Skynet/ANET A10 support
|
2017-06-24 19:07:03 -05:00 |
|
pinsDebug_plus_70.h
|
Reject generous donation of trailing whitespace
|
2017-06-15 15:25:24 -05:00 |
|
pinsDebug_Teensyduino.h
|
Unify AVR90USB: pinsDebug changes
|
2017-06-09 19:20:16 -05:00 |
|
planner.cpp
|
Drop extra initializers for vars initialized by EEPROM code
|
2017-07-20 22:57:49 -05:00 |
|
planner.h
|
BARICUDA valve pressure consistently uint8_t
|
2017-07-20 02:21:40 -05:00 |
|
planner_bezier.cpp
|
Apply maths macros and type changes ahead of HAL
|
2017-06-19 22:57:42 -05:00 |
|
planner_bezier.h
|
|
|
|
point_t.h
|
|
|
|
printcounter.cpp
|
Patch some serial macros
|
2017-06-09 17:17:23 -05:00 |
|
printcounter.h
|
Cosmetic patches
|
2017-04-26 06:24:23 -05:00 |
|
SanityCheck.h
|
Added new feature for AutoParking Extruder (APE)
|
2017-08-16 17:33:11 -05:00 |
|
Sd2Card.cpp
|
Patch goto labels for consistency
|
2017-08-14 22:51:47 -05:00 |
|
Sd2Card.h
|
Fix hexadecimal number formatting
|
2017-08-14 22:50:44 -05:00 |
|
SdBaseFile.cpp
|
Patch goto labels for consistency
|
2017-08-14 22:51:47 -05:00 |
|
SdBaseFile.h
|
Fix hexadecimal number formatting
|
2017-08-14 22:50:44 -05:00 |
|
SdFatConfig.h
|
|
|
|
SdFatStructs.h
|
Fix hexadecimal number formatting
|
2017-08-14 22:50:44 -05:00 |
|
SdFatUtil.cpp
|
|
|
|
SdFatUtil.h
|
|
|
|
SdFile.cpp
|
|
|
|
SdFile.h
|
|
|
|
SdInfo.h
|
Fix hexadecimal number formatting
|
2017-08-14 22:50:44 -05:00 |
|
SdVolume.cpp
|
Patch goto labels for consistency
|
2017-08-14 22:51:47 -05:00 |
|
SdVolume.h
|
Fix hexadecimal number formatting
|
2017-08-14 22:50:44 -05:00 |
|
serial.cpp
|
Add proportional font adjustment ratio
|
2017-05-10 17:19:03 -04:00 |
|
serial.h
|
Apply maths macros and type changes ahead of HAL
|
2017-06-19 22:57:42 -05:00 |
|
servo.cpp
|
Implement SERVO_DELAY as array
|
2017-08-15 00:28:47 -05:00 |
|
servo.h
|
Add macros for delays by machine cycle
|
2017-04-11 09:18:32 -05:00 |
|
softspi.h
|
Fix hexadecimal number formatting
|
2017-08-14 22:50:44 -05:00 |
|
speed_lookuptable.h
|
Spacing, cleanup in speed_lookuptable.h
|
2016-12-19 14:52:45 -08:00 |
|
spi.h
|
Use new attribute macros in more places
|
2017-05-22 17:38:58 -05:00 |
|
stepper.cpp
|
Drop extra initializers for vars initialized by EEPROM code
|
2017-07-20 22:57:49 -05:00 |
|
stepper.h
|
Edit digipot currents via LCD, save to EEPROM
|
2017-06-25 01:02:36 -05:00 |
|
stepper_dac.cpp
|
convert DAC percent to uint8_t
|
2017-06-19 17:46:41 -05:00 |
|
stepper_dac.h
|
convert DAC percent to uint8_t
|
2017-06-19 17:46:41 -05:00 |
|
stepper_indirection.cpp
|
Use float to init TMC2133 steps-per-mm
|
2017-08-05 03:48:52 -05:00 |
|
stepper_indirection.h
|
Add support for Průša MK2 Multiplexer
|
2017-06-27 04:55:30 -05:00 |
|
stopwatch.cpp
|
General comment cleanup
|
2017-04-08 18:58:33 -05:00 |
|
stopwatch.h
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
temperature.cpp
|
Drop extra initializers for vars initialized by EEPROM code
|
2017-07-20 22:57:49 -05:00 |
|
temperature.h
|
Add Skynet/ANET A10 support
|
2017-06-24 19:07:03 -05:00 |
|
thermistornames.h
|
Add Thermistor 75: MGB18 silicon pad
|
2017-03-18 11:35:20 -05:00 |
|
thermistortable_1.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_2.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_3.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_4.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_5.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_6.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_7.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_8.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_9.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_10.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_11.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_12.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_13.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_20.h
|
Tweaks to temperature code
|
2017-06-15 15:25:23 -05:00 |
|
thermistortable_51.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_52.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_55.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_60.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_66.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_70.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_71.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_75.h
|
Add Thermistor 75: MGB18 silicon pad
|
2017-03-18 11:35:20 -05:00 |
|
thermistortable_110.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_147.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_998.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_999.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_1010.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_1047.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortables.h
|
Misc. Clean Up (#6822)
|
2017-05-21 22:09:51 -05:00 |
|
twibus.cpp
|
Patch some serial macros
|
2017-06-09 17:17:23 -05:00 |
|
twibus.h
|
Clean up some trailing spaces
|
2017-07-01 22:32:20 -05:00 |
|
types.h
|
|
|
|
ubl.cpp
|
Followup to #7045
|
2017-06-16 14:18:19 -05:00 |
|
ubl.h
|
Clean up whitespace, trailing space, bad tab conversion, etc.
|
2017-08-03 11:20:03 -05:00 |
|
ubl_G29.cpp
|
Use [XY]_CENTER for error correction
|
2017-08-16 16:13:09 -05:00 |
|
ubl_motion.cpp
|
Followup cleanup patch
|
2017-08-03 14:55:22 -05:00 |
|
ultralcd.cpp
|
Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16
|
2017-08-16 15:58:15 -05:00 |
|
ultralcd.h
|
Add PROBE_MANUALLY support to G33
|
2017-07-04 18:06:54 -05:00 |
|
ultralcd_impl_DOGM.h
|
Drop extra initializers for vars initialized by EEPROM code
|
2017-07-20 22:57:49 -05:00 |
|
ultralcd_impl_HD44780.h
|
Apply coding standards to recent merges
|
2017-07-13 00:46:16 -05:00 |
|
ultralcd_st7920_u8glib_rrd.h
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
utf_mapper.h
|
UTF-8 mapper for Czech
|
2017-07-04 15:51:23 -05:00 |
|
utility.cpp
|
convert DAC percent to uint8_t
|
2017-06-19 17:46:41 -05:00 |
|
utility.h
|
Updates for G33-LCD interface
|
2017-07-07 05:00:59 -05:00 |
|
vector_3.cpp
|
Apply maths macros and type changes ahead of HAL
|
2017-06-19 22:57:42 -05:00 |
|
vector_3.h
|
Reference op with variable name
|
2017-05-28 11:33:22 -05:00 |
|
Version.h
|
bugfix-1.1.x ReadMe, Version, helper scripts
|
2017-05-04 07:17:10 -05:00 |
|
watchdog.cpp
|
Patch some serial macros
|
2017-06-09 17:17:23 -05:00 |
|
watchdog.h
|
|
|
