64 lines
3.1 KiB
Bash
Executable file
64 lines
3.1 KiB
Bash
Executable file
#!/usr/bin/env bash
|
|
#
|
|
# Build tests for LPC1768 (NXP ARM Cortex-M3)
|
|
#
|
|
|
|
# exit on first failure
|
|
set -e
|
|
|
|
#
|
|
# Build with the default configurations
|
|
#
|
|
#restore_configs
|
|
#opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
|
|
#exec_test $1 $2 "Default Configuration" "$3"
|
|
|
|
restore_configs
|
|
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB SERIAL_PORT_3 3 \
|
|
NEOPIXEL_TYPE NEO_RGB RGB_LED_R_PIN P2_12 RGB_LED_G_PIN P1_23 RGB_LED_B_PIN P1_22 RGB_LED_W_PIN P1_24
|
|
opt_enable FYSETC_MINI_12864_2_1 SDSUPPORT SDCARD_READONLY SERIAL_PORT_2 RGBW_LED E_DUAL_STEPPER_DRIVERS \
|
|
NEOPIXEL_LED NEOPIXEL_IS_SEQUENTIAL NEOPIXEL_STARTUP_TEST NEOPIXEL_BKGD_INDEX_FIRST NEOPIXEL_BKGD_INDEX_LAST NEOPIXEL_BKGD_COLOR NEOPIXEL_BKGD_ALWAYS_ON
|
|
exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel" "$3"
|
|
|
|
#restore_configs
|
|
#use_example_configs Mks/Sbase
|
|
#exec_test $1 $2 "MKS SBASE Example Config" "$3"
|
|
|
|
restore_configs
|
|
opt_set MOTHERBOARD BOARD_MKS_SBASE \
|
|
EXTRUDERS 2 TEMP_SENSOR_1 1 \
|
|
NUM_SERVOS 2 SERVO_DELAY '{ 300, 300 }'
|
|
opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR EDITABLE_SERVO_ANGLES SERVO_DETACH_GCODE \
|
|
ULTIMAKERCONTROLLER REALTIME_REPORTING_COMMANDS FULL_REPORT_TO_HOST_FEATURE
|
|
exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE, Grbl Realtime Report" "$3"
|
|
|
|
restore_configs
|
|
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EEB \
|
|
EXTRUDERS 2 TEMP_SENSOR_1 -1 TEMP_SENSOR_BED 5 \
|
|
GRID_MAX_POINTS_X 16 \
|
|
NOZZLE_TO_PROBE_OFFSET '{ 0, 0, 0 }' \
|
|
NOZZLE_CLEAN_MIN_TEMP 170 \
|
|
NOZZLE_CLEAN_START_POINT "{ { 10, 10, 3 }, { 10, 10, 3 } }" \
|
|
NOZZLE_CLEAN_END_POINT "{ { 10, 20, 3 }, { 10, 20, 3 } }"
|
|
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER ADAPTIVE_FAN_SLOWING TEMP_TUNING_MAINTAIN_FAN \
|
|
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY PID_EXTRUSION_SCALING SOUND_MENU_ITEM \
|
|
NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR PREHEAT_BEFORE_LEVELING G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
|
ASSISTED_TRAMMING ASSISTED_TRAMMING_WIZARD REPORT_TRAMMING_MM ASSISTED_TRAMMING_WAIT_POSITION \
|
|
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_GFX_OVERLAY \
|
|
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
|
|
Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
|
|
HOST_KEEPALIVE_FEATURE HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT \
|
|
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES \
|
|
SDSUPPORT SDCARD_SORT_ALPHA AUTO_REPORT_SD_STATUS EMERGENCY_PARSER SOFT_RESET_ON_KILL SOFT_RESET_VIA_SERIAL
|
|
exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3"
|
|
|
|
restore_configs
|
|
opt_set MOTHERBOARD BOARD_BTT_SKR_V1_3 EXTRUDERS 2 \
|
|
TEMP_SENSOR_0 1 TEMP_SENSOR_1 1 TEMP_SENSOR_BED 1 TEMP_SENSOR_CHAMBER 1 \
|
|
TEMP_CHAMBER_PIN P1_30 HEATER_CHAMBER_PIN P0_28
|
|
opt_enable PIDTEMPBED PIDTEMPCHAMBER PID_EXTRUSION_SCALING PID_FAN_SCALING
|
|
exec_test $1 $2 "SKR v1.3 with 2*Extr, bed, chamber all PID." "$3"
|
|
|
|
# clean up
|
|
restore_configs
|