0x90/Marlin
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity

General cleanup

Browse source
This commit is contained in:
Scott Lahteine 2017-04-12 00:08:24 -05:00 committed by Scott Lahteine
parent 2c86dfd3b5
commit 6131c62499
3 changed files with 15 additions and 19 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Marlin/Marlin_main.cpp
View file

@ -5858,10 +5858,6 @@ inline void gcode_M42() {
#else
#if !defined(z_servo_angle)
const int z_servo_angle[2] = Z_SERVO_ANGLES;
#endif
const uint8_t probe_index = code_seen('P') ? code_value_byte() : Z_ENDSTOP_SERVO_NR;
SERIAL_PROTOCOLLNPGM("Servo probe test");

28
Marlin/servo.cpp
View file

@ -168,8 +168,8 @@ static void initISR(timer16_Sequence_t timer) {
SBI(TIFR, OCF3A); // clear any pending interrupts;
SBI(ETIMSK, OCIE3A); // enable the output compare interrupt
#else
TIFR3 = _BV(OCF3A); // clear any pending interrupts;
TIMSK3 = _BV(OCIE3A) ; // enable the output compare interrupt
SBI(TIFR3, OCF3A); // clear any pending interrupts;
SBI(TIMSK3, OCIE3A); // enable the output compare interrupt
#endif
#ifdef WIRING
timerAttach(TIMER3OUTCOMPAREA_INT, Timer3Service); // for Wiring platform only
@ -183,7 +183,7 @@ static void initISR(timer16_Sequence_t timer) {
TCCR4B = _BV(CS41); // set prescaler of 8
TCNT4 = 0; // clear the timer count
TIFR4 = _BV(OCF4A); // clear any pending interrupts;
TIMSK4 = _BV(OCIE4A) ; // enable the output compare interrupt
TIMSK4 = _BV(OCIE4A); // enable the output compare interrupt
}
#endif
@ -193,7 +193,7 @@ static void initISR(timer16_Sequence_t timer) {
TCCR5B = _BV(CS51); // set prescaler of 8
TCNT5 = 0; // clear the timer count
TIFR5 = _BV(OCF5A); // clear any pending interrupts;
TIMSK5 = _BV(OCIE5A) ; // enable the output compare interrupt
TIMSK5 = _BV(OCIE5A); // enable the output compare interrupt
}
#endif
}
@ -203,21 +203,21 @@ static void finISR(timer16_Sequence_t timer) {
#ifdef WIRING
if (timer == _timer1) {
CBI(
#if defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
TIMSK1
#else
TIMSK
#endif
#if defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
TIMSK1
#else
TIMSK
#endif
, OCIE1A); // disable timer 1 output compare interrupt
timerDetach(TIMER1OUTCOMPAREA_INT);
}
else if (timer == _timer3) {
CBI(
#if defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
TIMSK3
#else
ETIMSK
#endif
#if defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
TIMSK3
#else
ETIMSK
#endif
, OCIE3A); // disable the timer3 output compare A interrupt
timerDetach(TIMER3OUTCOMPAREA_INT);
}

2
Marlin/stepper.cpp
View file

@ -271,7 +271,7 @@ volatile long Stepper::endstops_trigsteps[XYZ];
* The slope of acceleration is calculated using v = u + at where t is the accumulated timer values of the steps so far.
*/
void Stepper::wake_up() {
// TCNT1 = 0;
// TCNT1 = 0;
ENABLE_STEPPER_DRIVER_INTERRUPT();
}