🔧 Permit extrude without hotend (#25709)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
ellensp
GitHub
parent
89ccede139
commit
c8ed7950f4
|
|
@ -581,7 +581,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
|
|||
case 102: M102(); break; // M102: Configure Bed Distance Sensor
|
||||
#endif
|
||||
|
||||
#if HAS_EXTRUDERS
|
||||
#if HAS_HOTEND
|
||||
case 104: M104(); break; // M104: Set hot end temperature
|
||||
case 109: M109(); break; // M109: Wait for hotend temperature to reach target
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -716,7 +716,7 @@ private:
|
|||
static void M102_report(const bool forReplay=true);
|
||||
#endif
|
||||
|
||||
#if HAS_EXTRUDERS
|
||||
#if HAS_HOTEND
|
||||
static void M104_M109(const bool isM109);
|
||||
FORCE_INLINE static void M104() { M104_M109(false); }
|
||||
FORCE_INLINE static void M109() { M104_M109(true); }
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@
|
|||
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if HAS_EXTRUDERS
|
||||
#if HAS_HOTEND
|
||||
|
||||
#include "../gcode.h"
|
||||
#include "../../module/temperature.h"
|
||||
|
|
@ -135,4 +135,4 @@ void GcodeSuite::M104_M109(const bool isM109) {
|
|||
(void)thermalManager.wait_for_hotend(target_extruder, no_wait_for_cooling);
|
||||
}
|
||||
|
||||
#endif // EXTRUDERS
|
||||
#endif // HAS_HOTEND
|
||||
|
|
|
|||
|
|
@ -624,8 +624,6 @@
|
|||
#undef MIXING_EXTRUDER
|
||||
#undef HOTEND_IDLE_TIMEOUT
|
||||
#undef DISABLE_E
|
||||
#undef THERMAL_PROTECTION_HOTENDS
|
||||
#undef PREVENT_COLD_EXTRUSION
|
||||
#undef PREVENT_LENGTHY_EXTRUDE
|
||||
#undef FILAMENT_RUNOUT_SENSOR
|
||||
#undef FILAMENT_RUNOUT_DISTANCE_MM
|
||||
|
|
@ -657,9 +655,6 @@
|
|||
#else
|
||||
#define E_STEPPERS 1
|
||||
#endif
|
||||
#if !HAS_SWITCHING_NOZZLE
|
||||
#define HOTENDS E_STEPPERS
|
||||
#endif
|
||||
|
||||
#elif ENABLED(MIXING_EXTRUDER) // Multiple feeds are mixed proportionally
|
||||
|
||||
|
|
@ -691,16 +686,7 @@
|
|||
#define SINGLENOZZLE
|
||||
#endif
|
||||
|
||||
#if EITHER(SINGLENOZZLE, MIXING_EXTRUDER) // One hotend, one thermistor, no XY offset
|
||||
#undef HOTENDS
|
||||
#define HOTENDS 1
|
||||
#undef HOTEND_OFFSET_X
|
||||
#undef HOTEND_OFFSET_Y
|
||||
#endif
|
||||
|
||||
#ifndef HOTENDS
|
||||
#define HOTENDS EXTRUDERS
|
||||
#endif
|
||||
// Default E steppers / manual motion is one per extruder
|
||||
#ifndef E_STEPPERS
|
||||
#define E_STEPPERS EXTRUDERS
|
||||
#endif
|
||||
|
|
@ -708,6 +694,45 @@
|
|||
#define E_MANUAL EXTRUDERS
|
||||
#endif
|
||||
|
||||
// Number of hotends...
|
||||
#if EITHER(SINGLENOZZLE, MIXING_EXTRUDER) // Only one for singlenozzle or mixing extruder
|
||||
#define HOTENDS 1
|
||||
#elif HAS_SWITCHING_EXTRUDER && !HAS_SWITCHING_NOZZLE // One for each pair of abstract "extruders"
|
||||
#define HOTENDS E_STEPPERS
|
||||
#elif TEMP_SENSOR_0
|
||||
#define HOTENDS EXTRUDERS // One per extruder if at least one heater exists
|
||||
#else
|
||||
#define HOTENDS 0 // A machine with no hotends at all can still extrude
|
||||
#endif
|
||||
|
||||
// More than one hotend...
|
||||
#if HOTENDS > 1
|
||||
#define HAS_MULTI_HOTEND 1
|
||||
#define HAS_HOTEND_OFFSET 1
|
||||
#ifndef HOTEND_OFFSET_X
|
||||
#define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
|
||||
#endif
|
||||
#ifndef HOTEND_OFFSET_Y
|
||||
#define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
|
||||
#endif
|
||||
#ifndef HOTEND_OFFSET_Z
|
||||
#define HOTEND_OFFSET_Z { 0 } // Z offsets for each extruder
|
||||
#endif
|
||||
#else
|
||||
#undef HOTEND_OFFSET_X
|
||||
#undef HOTEND_OFFSET_Y
|
||||
#undef HOTEND_OFFSET_Z
|
||||
#endif
|
||||
|
||||
// At least one hotend...
|
||||
#if HOTENDS
|
||||
#define HAS_HOTEND 1
|
||||
#ifndef HOTEND_OVERSHOOT
|
||||
#define HOTEND_OVERSHOOT 15
|
||||
#endif
|
||||
#endif
|
||||
|
||||
// Clean up E-stepper-based settings...
|
||||
#if E_STEPPERS <= 7
|
||||
#undef INVERT_E7_DIR
|
||||
#undef E7_DRIVER_TYPE
|
||||
|
|
@ -1037,19 +1062,6 @@
|
|||
#define E_INDEX_N(E) 0
|
||||
#endif
|
||||
|
||||
#if HOTENDS
|
||||
#define HAS_HOTEND 1
|
||||
#ifndef HOTEND_OVERSHOOT
|
||||
#define HOTEND_OVERSHOOT 15
|
||||
#endif
|
||||
#if HOTENDS > 1
|
||||
#define HAS_MULTI_HOTEND 1
|
||||
#define HAS_HOTEND_OFFSET 1
|
||||
#endif
|
||||
#else
|
||||
#undef PID_PARAMS_PER_HOTEND
|
||||
#endif
|
||||
|
||||
// Helper macros for extruder and hotend arrays
|
||||
#define _EXTRUDER_LOOP(E) for (int8_t E = 0; E < EXTRUDERS; E++)
|
||||
#define EXTRUDER_LOOP() _EXTRUDER_LOOP(e)
|
||||
|
|
@ -1061,21 +1073,6 @@
|
|||
#define ARRAY_BY_HOTENDS(V...) ARRAY_N(HOTENDS, V)
|
||||
#define ARRAY_BY_HOTENDS1(v1) ARRAY_N_1(HOTENDS, v1)
|
||||
|
||||
/**
|
||||
* Default hotend offsets, if not defined
|
||||
*/
|
||||
#if HAS_HOTEND_OFFSET
|
||||
#ifndef HOTEND_OFFSET_X
|
||||
#define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
|
||||
#endif
|
||||
#ifndef HOTEND_OFFSET_Y
|
||||
#define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
|
||||
#endif
|
||||
#ifndef HOTEND_OFFSET_Z
|
||||
#define HOTEND_OFFSET_Z { 0 } // Z offsets for each extruder
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Disable unused SINGLENOZZLE sub-options
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -184,7 +184,6 @@
|
|||
#if !HAS_EXTRUDERS
|
||||
#define NO_VOLUMETRICS
|
||||
#undef ADVANCED_PAUSE_FEATURE
|
||||
#undef AUTOTEMP
|
||||
#undef DISABLE_IDLE_E
|
||||
#undef EXTRUDER_RUNOUT_PREVENT
|
||||
#undef FILAMENT_LOAD_UNLOAD_GCODES
|
||||
|
|
@ -193,11 +192,8 @@
|
|||
#undef LIN_ADVANCE
|
||||
#undef MANUAL_E_MOVES_RELATIVE
|
||||
#undef PID_EXTRUSION_SCALING
|
||||
#undef PIDTEMP
|
||||
#undef SHOW_TEMP_ADC_VALUES
|
||||
#undef STEALTHCHOP_E
|
||||
#undef THERMAL_PROTECTION_PERIOD
|
||||
#undef WATCH_TEMP_PERIOD
|
||||
#endif
|
||||
|
||||
#if ENABLED(DISABLE_X) && !defined(DISABLE_IDLE_X)
|
||||
|
|
@ -237,22 +233,47 @@
|
|||
#endif
|
||||
#undef _OR_HAS_DI
|
||||
|
||||
#if HOTENDS <= 7
|
||||
// Remove hotend-dependent settings
|
||||
#if HOTENDS < 8
|
||||
#undef E7_AUTO_FAN_PIN
|
||||
#if HOTENDS <= 6
|
||||
#undef HEATER_7_MAXTEMP
|
||||
#undef HEATER_7_MINTEMP
|
||||
#if HOTENDS < 7
|
||||
#undef E6_AUTO_FAN_PIN
|
||||
#if HOTENDS <= 5
|
||||
#undef HEATER_6_MAXTEMP
|
||||
#undef HEATER_6_MINTEMP
|
||||
#if HOTENDS < 6
|
||||
#undef E5_AUTO_FAN_PIN
|
||||
#if HOTENDS <= 4
|
||||
#undef HEATER_5_MAXTEMP
|
||||
#undef HEATER_5_MINTEMP
|
||||
#if HOTENDS < 5
|
||||
#undef E4_AUTO_FAN_PIN
|
||||
#if HOTENDS <= 3
|
||||
#undef HEATER_4_MAXTEMP
|
||||
#undef HEATER_4_MINTEMP
|
||||
#if HOTENDS < 4
|
||||
#undef E3_AUTO_FAN_PIN
|
||||
#if HOTENDS <= 2
|
||||
#undef HEATER_3_MAXTEMP
|
||||
#undef HEATER_3_MINTEMP
|
||||
#if HOTENDS < 3
|
||||
#undef E2_AUTO_FAN_PIN
|
||||
#if HOTENDS <= 1
|
||||
#undef HEATER_2_MAXTEMP
|
||||
#undef HEATER_2_MINTEMP
|
||||
#if HOTENDS < 2
|
||||
#undef E1_AUTO_FAN_PIN
|
||||
#if HOTENDS == 0
|
||||
#undef HEATER_1_MAXTEMP
|
||||
#undef HEATER_1_MINTEMP
|
||||
#if HOTENDS < 1
|
||||
#undef AUTOTEMP
|
||||
#undef E0_AUTO_FAN_PIN
|
||||
#undef HEATER_0_MAXTEMP
|
||||
#undef HEATER_0_MINTEMP
|
||||
#undef PID_PARAMS_PER_HOTEND
|
||||
#undef PIDTEMP
|
||||
#undef MPCTEMP
|
||||
#undef PREVENT_COLD_EXTRUSION
|
||||
#undef THERMAL_PROTECTION_HOTENDS
|
||||
#undef THERMAL_PROTECTION_PERIOD
|
||||
#undef WATCH_TEMP_PERIOD
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
|
|
@ -325,15 +346,13 @@
|
|||
#define TEMP_SENSOR_0_IS_AD8495 1
|
||||
#elif TEMP_SENSOR_0 == -1
|
||||
#define TEMP_SENSOR_0_IS_AD595 1
|
||||
#elif TEMP_SENSOR_0 == 1000
|
||||
#define TEMP_SENSOR_0_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_0 == 998 || TEMP_SENSOR_0 == 999
|
||||
#define TEMP_SENSOR_0_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_0 > 0
|
||||
#define TEMP_SENSOR_0_IS_THERMISTOR 1
|
||||
#else
|
||||
#undef HEATER_0_MINTEMP
|
||||
#undef HEATER_0_MAXTEMP
|
||||
#if TEMP_SENSOR_0 == 1000
|
||||
#define TEMP_SENSOR_0_IS_CUSTOM 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_IS_MAX_TC(1)
|
||||
|
|
@ -370,15 +389,13 @@
|
|||
#define TEMP_SENSOR_1_IS_AD8495 1
|
||||
#elif TEMP_SENSOR_1 == -1
|
||||
#define TEMP_SENSOR_1_IS_AD595 1
|
||||
#elif TEMP_SENSOR_1 == 1000
|
||||
#define TEMP_SENSOR_1_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_1 == 998 || TEMP_SENSOR_1 == 999
|
||||
#define TEMP_SENSOR_1_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_1 > 0
|
||||
#define TEMP_SENSOR_1_IS_THERMISTOR 1
|
||||
#else
|
||||
#undef HEATER_1_MINTEMP
|
||||
#undef HEATER_1_MAXTEMP
|
||||
#if TEMP_SENSOR_1 == 1000
|
||||
#define TEMP_SENSOR_1_IS_CUSTOM 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_IS_MAX_TC(2)
|
||||
|
|
@ -415,70 +432,58 @@
|
|||
#define TEMP_SENSOR_2_IS_AD8495 1
|
||||
#elif TEMP_SENSOR_2 == -1
|
||||
#define TEMP_SENSOR_2_IS_AD595 1
|
||||
#elif TEMP_SENSOR_2 == 1000
|
||||
#define TEMP_SENSOR_2_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_2 == 998 || TEMP_SENSOR_2 == 999
|
||||
#define TEMP_SENSOR_2_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_2 > 0
|
||||
#define TEMP_SENSOR_2_IS_THERMISTOR 1
|
||||
#else
|
||||
#undef HEATER_2_MINTEMP
|
||||
#undef HEATER_2_MAXTEMP
|
||||
#if TEMP_SENSOR_2 == 1000
|
||||
#define TEMP_SENSOR_2_IS_CUSTOM 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_3 == 1000
|
||||
#define TEMP_SENSOR_3_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_3 == 998 || TEMP_SENSOR_3 == 999
|
||||
#if TEMP_SENSOR_3 == 998 || TEMP_SENSOR_3 == 999
|
||||
#define TEMP_SENSOR_3_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_3 > 0
|
||||
#define TEMP_SENSOR_3_IS_THERMISTOR 1
|
||||
#elif !TEMP_SENSOR_3
|
||||
#undef HEATER_3_MINTEMP
|
||||
#undef HEATER_3_MAXTEMP
|
||||
#if TEMP_SENSOR_3 == 1000
|
||||
#define TEMP_SENSOR_3_IS_CUSTOM 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_4 == 1000
|
||||
#define TEMP_SENSOR_4_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_4 == 998 || TEMP_SENSOR_4 == 999
|
||||
#if TEMP_SENSOR_4 == 998 || TEMP_SENSOR_4 == 999
|
||||
#define TEMP_SENSOR_4_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_4 > 0
|
||||
#define TEMP_SENSOR_4_IS_THERMISTOR 1
|
||||
#elif !TEMP_SENSOR_4
|
||||
#undef HEATER_4_MINTEMP
|
||||
#undef HEATER_4_MAXTEMP
|
||||
#if TEMP_SENSOR_4 == 1000
|
||||
#define TEMP_SENSOR_4_IS_CUSTOM 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_5 == 1000
|
||||
#define TEMP_SENSOR_5_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_5 == 998 || TEMP_SENSOR_5 == 999
|
||||
#if TEMP_SENSOR_5 == 998 || TEMP_SENSOR_5 == 999
|
||||
#define TEMP_SENSOR_5_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_5 > 0
|
||||
#define TEMP_SENSOR_5_IS_THERMISTOR 1
|
||||
#elif !TEMP_SENSOR_5
|
||||
#undef HEATER_5_MINTEMP
|
||||
#undef HEATER_5_MAXTEMP
|
||||
#if TEMP_SENSOR_5 == 1000
|
||||
#define TEMP_SENSOR_5_IS_CUSTOM 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_6 == 1000
|
||||
#define TEMP_SENSOR_6_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_6 == 998 || TEMP_SENSOR_6 == 999
|
||||
#if TEMP_SENSOR_6 == 998 || TEMP_SENSOR_6 == 999
|
||||
#define TEMP_SENSOR_6_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_6 > 0
|
||||
#define TEMP_SENSOR_6_IS_THERMISTOR 1
|
||||
#elif !TEMP_SENSOR_6
|
||||
#undef HEATER_6_MINTEMP
|
||||
#undef HEATER_6_MAXTEMP
|
||||
#if TEMP_SENSOR_6 == 1000
|
||||
#define TEMP_SENSOR_6_IS_CUSTOM 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_7 == 1000
|
||||
#define TEMP_SENSOR_7_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_7 == 998 || TEMP_SENSOR_7 == 999
|
||||
#if TEMP_SENSOR_7 == 998 || TEMP_SENSOR_7 == 999
|
||||
#define TEMP_SENSOR_7_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_7 > 0
|
||||
#define TEMP_SENSOR_7_IS_THERMISTOR 1
|
||||
#elif !TEMP_SENSOR_7
|
||||
#undef HEATER_7_MINTEMP
|
||||
#undef HEATER_7_MAXTEMP
|
||||
#if TEMP_SENSOR_7 == 1000
|
||||
#define TEMP_SENSOR_7_IS_CUSTOM 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_IS_MAX_TC(REDUNDANT)
|
||||
|
|
@ -542,12 +547,12 @@
|
|||
#define TEMP_SENSOR_REDUNDANT_IS_AD8495 1
|
||||
#elif TEMP_SENSOR_REDUNDANT == -1
|
||||
#define TEMP_SENSOR_REDUNDANT_IS_AD595 1
|
||||
#elif TEMP_SENSOR_REDUNDANT == 998 || TEMP_SENSOR_REDUNDANT == 999
|
||||
#error "Dummy sensors are not supported for TEMP_SENSOR_REDUNDANT."
|
||||
#elif TEMP_SENSOR_REDUNDANT > 0
|
||||
#define TEMP_SENSOR_REDUNDANT_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_REDUNDANT == 1000
|
||||
#define TEMP_SENSOR_REDUNDANT_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_REDUNDANT == 998 || TEMP_SENSOR_REDUNDANT == 999
|
||||
#error "Dummy sensors are not supported for TEMP_SENSOR_REDUNDANT."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -572,16 +577,13 @@
|
|||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_3."
|
||||
#elif TEMP_SENSOR_3 == -1
|
||||
#define TEMP_SENSOR_3_IS_AD595 1
|
||||
#elif TEMP_SENSOR_3 == 998 || TEMP_SENSOR_3 == 999
|
||||
#define TEMP_SENSOR_3_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_3 > 0
|
||||
#define TEMP_SENSOR_3_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_3 == 1000
|
||||
#define TEMP_SENSOR_3_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_3 == 998 || TEMP_SENSOR_3 == 999
|
||||
#define TEMP_SENSOR_3_IS_DUMMY 1
|
||||
#endif
|
||||
#else
|
||||
#undef HEATER_3_MINTEMP
|
||||
#undef HEATER_3_MAXTEMP
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_4 == -4
|
||||
|
|
@ -592,16 +594,13 @@
|
|||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_4."
|
||||
#elif TEMP_SENSOR_4 == -1
|
||||
#define TEMP_SENSOR_4_IS_AD595 1
|
||||
#elif TEMP_SENSOR_4 == 998 || TEMP_SENSOR_4 == 999
|
||||
#define TEMP_SENSOR_4_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_4 > 0
|
||||
#define TEMP_SENSOR_4_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_4 == 1000
|
||||
#define TEMP_SENSOR_4_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_4 == 998 || TEMP_SENSOR_4 == 999
|
||||
#define TEMP_SENSOR_4_IS_DUMMY 1
|
||||
#endif
|
||||
#else
|
||||
#undef HEATER_4_MINTEMP
|
||||
#undef HEATER_4_MAXTEMP
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_5 == -4
|
||||
|
|
@ -612,16 +611,13 @@
|
|||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_5."
|
||||
#elif TEMP_SENSOR_5 == -1
|
||||
#define TEMP_SENSOR_5_IS_AD595 1
|
||||
#elif TEMP_SENSOR_5 == 998 || TEMP_SENSOR_5 == 999
|
||||
#define TEMP_SENSOR_5_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_5 > 0
|
||||
#define TEMP_SENSOR_5_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_5 == 1000
|
||||
#define TEMP_SENSOR_5_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_5 == 998 || TEMP_SENSOR_5 == 999
|
||||
#define TEMP_SENSOR_5_IS_DUMMY 1
|
||||
#endif
|
||||
#else
|
||||
#undef HEATER_5_MINTEMP
|
||||
#undef HEATER_5_MAXTEMP
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_6 == -4
|
||||
|
|
@ -632,16 +628,13 @@
|
|||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_6."
|
||||
#elif TEMP_SENSOR_6 == -1
|
||||
#define TEMP_SENSOR_6_IS_AD595 1
|
||||
#elif TEMP_SENSOR_6 == 998 || TEMP_SENSOR_6 == 999
|
||||
#define TEMP_SENSOR_6_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_6 > 0
|
||||
#define TEMP_SENSOR_6_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_6 == 1000
|
||||
#define TEMP_SENSOR_6_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_6 == 998 || TEMP_SENSOR_6 == 999
|
||||
#define TEMP_SENSOR_6_IS_DUMMY 1
|
||||
#endif
|
||||
#else
|
||||
#undef HEATER_6_MINTEMP
|
||||
#undef HEATER_6_MAXTEMP
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_7 == -4
|
||||
|
|
@ -652,16 +645,13 @@
|
|||
#error "MAX7775 Thermocouples (-2) not supported for TEMP_SENSOR_7."
|
||||
#elif TEMP_SENSOR_7 == -1
|
||||
#define TEMP_SENSOR_7_IS_AD595 1
|
||||
#elif TEMP_SENSOR_7 == 998 || TEMP_SENSOR_7 == 999
|
||||
#define TEMP_SENSOR_7_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_7 > 0
|
||||
#define TEMP_SENSOR_7_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_7 == 1000
|
||||
#define TEMP_SENSOR_7_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_7 == 998 || TEMP_SENSOR_7 == 999
|
||||
#define TEMP_SENSOR_7_IS_DUMMY 1
|
||||
#endif
|
||||
#else
|
||||
#undef HEATER_7_MINTEMP
|
||||
#undef HEATER_7_MAXTEMP
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BED == -4
|
||||
|
|
@ -672,12 +662,12 @@
|
|||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BED."
|
||||
#elif TEMP_SENSOR_BED == -1
|
||||
#define TEMP_SENSOR_BED_IS_AD595 1
|
||||
#elif TEMP_SENSOR_BED == 998 || TEMP_SENSOR_BED == 999
|
||||
#define TEMP_SENSOR_BED_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_BED > 0
|
||||
#define TEMP_SENSOR_BED_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_BED == 1000
|
||||
#define TEMP_SENSOR_BED_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_BED == 998 || TEMP_SENSOR_BED == 999
|
||||
#define TEMP_SENSOR_BED_IS_DUMMY 1
|
||||
#endif
|
||||
#else
|
||||
#undef THERMAL_PROTECTION_BED
|
||||
|
|
@ -694,12 +684,12 @@
|
|||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_CHAMBER."
|
||||
#elif TEMP_SENSOR_CHAMBER == -1
|
||||
#define TEMP_SENSOR_CHAMBER_IS_AD595 1
|
||||
#elif TEMP_SENSOR_CHAMBER == 998 || TEMP_SENSOR_CHAMBER == 999
|
||||
#define TEMP_SENSOR_CHAMBER_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_CHAMBER > 0
|
||||
#define TEMP_SENSOR_CHAMBER_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_CHAMBER == 1000
|
||||
#define TEMP_SENSOR_CHAMBER_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_CHAMBER == 998 || TEMP_SENSOR_CHAMBER == 999
|
||||
#define TEMP_SENSOR_CHAMBER_IS_DUMMY 1
|
||||
#endif
|
||||
#else
|
||||
#undef THERMAL_PROTECTION_CHAMBER
|
||||
|
|
@ -715,12 +705,12 @@
|
|||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_COOLER."
|
||||
#elif TEMP_SENSOR_COOLER == -1
|
||||
#define TEMP_SENSOR_COOLER_IS_AD595 1
|
||||
#elif TEMP_SENSOR_COOLER == 998 || TEMP_SENSOR_COOLER == 999
|
||||
#define TEMP_SENSOR_COOLER_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_COOLER > 0
|
||||
#define TEMP_SENSOR_COOLER_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_COOLER == 1000
|
||||
#define TEMP_SENSOR_COOLER_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_COOLER == 998 || TEMP_SENSOR_COOLER == 999
|
||||
#define TEMP_SENSOR_COOLER_IS_DUMMY 1
|
||||
#endif
|
||||
#else
|
||||
#undef THERMAL_PROTECTION_COOLER
|
||||
|
|
@ -736,12 +726,12 @@
|
|||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_PROBE."
|
||||
#elif TEMP_SENSOR_PROBE == -1
|
||||
#define TEMP_SENSOR_PROBE_IS_AD595 1
|
||||
#elif TEMP_SENSOR_PROBE == 998 || TEMP_SENSOR_PROBE == 999
|
||||
#define TEMP_SENSOR_PROBE_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_PROBE > 0
|
||||
#define TEMP_SENSOR_PROBE_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_PROBE == 1000
|
||||
#define TEMP_SENSOR_PROBE_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_PROBE == 998 || TEMP_SENSOR_PROBE == 999
|
||||
#define TEMP_SENSOR_PROBE_IS_DUMMY 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -753,12 +743,12 @@
|
|||
#error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BOARD."
|
||||
#elif TEMP_SENSOR_BOARD == -1
|
||||
#define TEMP_SENSOR_BOARD_IS_AD595 1
|
||||
#elif TEMP_SENSOR_BOARD == 998 || TEMP_SENSOR_BOARD == 999
|
||||
#define TEMP_SENSOR_BOARD_IS_DUMMY 1
|
||||
#elif TEMP_SENSOR_BOARD > 0
|
||||
#define TEMP_SENSOR_BOARD_IS_THERMISTOR 1
|
||||
#if TEMP_SENSOR_BOARD == 1000
|
||||
#define TEMP_SENSOR_BOARD_IS_CUSTOM 1
|
||||
#elif TEMP_SENSOR_BOARD == 998 || TEMP_SENSOR_BOARD == 999
|
||||
#define TEMP_SENSOR_BOARD_IS_DUMMY 1
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -2628,22 +2628,22 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
|
|||
#endif
|
||||
|
||||
/**
|
||||
* Test Sensor & Heater pin combos.
|
||||
* Pins and Sensor IDs must be set for each heater
|
||||
*/
|
||||
#if HAS_EXTRUDERS && !ANY_PIN(TEMP_0, TEMP_0_CS)
|
||||
#error "TEMP_0_PIN or TEMP_0_CS_PIN not defined for this board."
|
||||
#elif HAS_EXTRUDERS && !HAS_HEATER_0
|
||||
#if HAS_HOTEND
|
||||
#if !HAS_HEATER_0
|
||||
#error "HEATER_0_PIN not defined for this board."
|
||||
#elif TEMP_SENSOR_IS_MAX_TC(0) && !PIN_EXISTS(TEMP_0_CS)
|
||||
#elif TEMP_SENSOR_IS_MAX_TC(0) && !PIN_EXISTS(TEMP_0_CS)
|
||||
#error "TEMP_SENSOR_0 MAX thermocouple requires TEMP_0_CS_PIN."
|
||||
#elif HAS_HOTEND && !HAS_TEMP_HOTEND && !TEMP_SENSOR_0_IS_DUMMY
|
||||
#error "TEMP_0_PIN (required for TEMP_SENSOR_0) not defined for this board."
|
||||
#elif EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL) && !HAS_HEATER_1
|
||||
#elif TEMP_SENSOR_0 == 0
|
||||
#error "TEMP_SENSOR_0 is required with 1 or more HOTENDS."
|
||||
#elif !ANY_PIN(TEMP_0, TEMP_0_CS) && !TEMP_SENSOR_0_IS_DUMMY
|
||||
#error "TEMP_0_PIN or TEMP_0_CS_PIN not defined for this board."
|
||||
#endif
|
||||
#if EITHER(HAS_MULTI_HOTEND, HEATERS_PARALLEL) && !HAS_HEATER_1
|
||||
#error "HEATER_1_PIN is not defined. TEMP_SENSOR_1 might not be set, or the board (not EEB / EEF?) doesn't define a pin."
|
||||
#endif
|
||||
|
||||
#if HAS_MULTI_HOTEND
|
||||
#endif
|
||||
#if HAS_MULTI_HOTEND
|
||||
#if TEMP_SENSOR_IS_MAX_TC(1) && !PIN_EXISTS(TEMP_1_CS)
|
||||
#error "TEMP_SENSOR_1 MAX thermocouple requires TEMP_1_CS_PIN."
|
||||
#elif TEMP_SENSOR_1 == 0
|
||||
|
|
@ -2705,7 +2705,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
|
|||
#endif // HOTENDS > 4
|
||||
#endif // HOTENDS > 3
|
||||
#endif // HOTENDS > 2
|
||||
#endif // HAS_MULTI_HOTEND
|
||||
#endif // HAS_MULTI_HOTEND
|
||||
#endif // HAS_HOTEND
|
||||
|
||||
#if DO_TOOLCHANGE_FOR_PROBING && PROBING_TOOL >= EXTRUDERS
|
||||
#error "PROBING_TOOL must be a valid tool index."
|
||||
|
|
@ -2836,8 +2837,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS
|
|||
#error "E0_STEP_PIN or E0_DIR_PIN not defined for this board."
|
||||
#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PINS_EXIST(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
|
||||
#error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
|
||||
#elif EXTRUDERS && TEMP_SENSOR_0 == 0
|
||||
#error "TEMP_SENSOR_0 is required if there are any extruders."
|
||||
#elif HOTENDS && TEMP_SENSOR_0 == 0
|
||||
#error "TEMP_SENSOR_0 is required if there are any hotends."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -2785,7 +2785,7 @@ void Temperature::init() {
|
|||
temp_range[NR].raw_max -= TEMPDIR(NR) * (OVERSAMPLENR); \
|
||||
}while(0)
|
||||
|
||||
#define _MINMAX_TEST(N,M) (HOTENDS > N && TEMP_SENSOR(N) > 0 && TEMP_SENSOR(N) != 998 && TEMP_SENSOR(N) != 999 && defined(HEATER_##N##_##M##TEMP))
|
||||
#define _MINMAX_TEST(N,M) (HOTENDS > N && TEMP_SENSOR_##NR##_IS_THERMISTOR && defined(HEATER_##N##_##M##TEMP))
|
||||
|
||||
#if _MINMAX_TEST(0, MIN)
|
||||
_TEMP_MIN_E(0);
|
||||
|
|
|
|||
Loading…
Reference in a new issue