0x90/Marlin
12
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
3929 commits 3 branches 0 tags 230 MiB
Commit graph

3929 commits

This branch
This branch
All branches
Author SHA1 Message Date
jbrazio 17cc2a9663 Z_RAISE_AFTER_PROBING value was being ignored by Marlin because 
raise_z_after_probing() was only called if the printer type was set to a
DELTA or if the printer had a docking sled for the probe.
 2016-02-29 15:48:26 +00:00
Scott Lahteine 9f8e6dce20 Merge pull request #2942 from esenapaj/esenapaj-patch-2 
more suitable display format for delta printer
 2016-02-18 17:59:35 -08:00
Scott Lahteine e1beaf61eb Merge pull request #2985 from AnHardt/adv-ok 
Repair N in ADVANCED_OK
 2016-02-18 17:06:26 -08:00
esenapaj 34cde1b77c Merge pull request #14 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-02-19 09:19:23 +09:00
Scott Lahteine 0c9db67273 Merge pull request #2983 from AnHardt/ok-echo 
Replace the "ok" in M280, M301, M304, M851 with output not including …
 2016-02-17 19:09:41 -08:00
Scott Lahteine d4e7c2d694 Merge pull request #2976 from thinkyhead/drop_configurator 
Drop the experimental Configurator
 2016-02-17 17:08:08 -08:00
Scott Lahteine 9df0e0e0cc Merge pull request #2974 from thinkyhead/sanitycheck_spi_speed 
Sanity-check deprecated options replaced by SPI_SPEED
 2016-02-17 17:07:58 -08:00
Scott Lahteine 3e2473e695 Merge pull request #2988 from thinkyhead/z2_more_extruders 
Use next open E connector for Y2/Z2
 2016-02-17 17:07:07 -08:00
Scott Lahteine 8eaba020fb Merge pull request #2973 from thinkyhead/fix_splash_url 
Remove references to marlinfirmware.org
 2016-02-17 17:05:06 -08:00
Scott Lahteine 438a87eba8 Sanity check deprecated SDSLOW, SDEXTRASLOW 2016-02-17 14:54:10 -08:00
Scott Lahteine b19b272172 Update configurations with SPI_SPEED 
- Include aligned comment about new SDSUPPORT behavior
 2016-02-17 14:54:09 -08:00
Scott Lahteine 7f30f85602 Merge pull request #2987 from thinkyhead/gcode_allow_no_initial_space 
Fix handling of spaces in GCode
 2016-02-17 14:51:19 -08:00
Scott Lahteine b81d3b83cf Drop the experimental Configurator 
Development moved to https://github.com/thinkyhead/MarlinConfigurator
 2016-02-17 14:49:37 -08:00
Scott Lahteine be691b51f1 Remove references to marlinfirmware.org 
The domain is gone and doesn’t redirect, so for now show no URL on the boot screen.
 2016-02-17 14:41:46 -08:00
Scott Lahteine f3f58bd619 Merge pull request #2992 from thinkyhead/rc_rename_fpos_t 
Rename fpos_t to avoid libc conflict
 2016-02-17 14:40:33 -08:00
Scott Lahteine b03787262a Merge pull request #2868 from esenapaj/esenapaj-patch-1 
Fix AUTOTEMP documentation in configs
 2016-02-17 14:15:29 -08:00
Scott Lahteine b83e472bd3 Rename fpos_t to avoid libc conflict 2016-02-10 20:49:25 -08:00
Scott Lahteine 68457ee903 For Dual Y/Z use the next available extruder pins 2016-02-09 21:59:09 -08:00
Scott Lahteine 711e5db19a Tweak comment in process_next_command 2016-02-09 18:16:35 -08:00
Scott Lahteine 400e9329be Allow spaces after a code letter 2016-02-09 18:03:13 -08:00
Scott Lahteine cdcb80f3c5 Allow no-space after initial command 
Addresses issue #2715
 2016-02-09 18:00:35 -08:00
AnHardt 6f473f7fc6 Repair N in ADVANCED_OK 
Send the correct line number.
If no N was in the command - non't send an N.
 2016-02-09 19:23:26 +01:00
AnHardt efbd705eda Replace the "ok" in M280, M301, M304, M851 with output not including an "ok" 
Replace the "ok" in M280, M301, M304, M851 with output not including an "ok"
to avoid senting two "ok"s for a single g-code.

Doing the same for M105 would break the input filters of the hosts.
For M105 the other "ok" is omitted.
 2016-02-09 13:36:03 +01:00
esenapaj ab5aa3fc92 Merge pull request #5 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-02-08 05:42:11 +09:00
esenapaj 27d918d836 Merge pull request #4 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-02-08 05:35:32 +09:00
Scott Lahteine 159ff94afd Remove obsolete HEATER_BED_DUTY_CYCLE_DIVIDER #2977 2016-02-07 08:02:11 -06:00
Richard Wackerbarth 1112dcd3c2 Merge Slow SD Handling #2848 2016-02-07 08:00:14 -06:00
Ruwan J Egoda Gamage 1270fbfd38 Using SET_INPUT instead of pinMode 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage b58083b0fa Getting rid of SDEXTRASLOW, SDSLOW variables. 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage 1833049b8a reusing millis() 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage 1b7c443628 Adding SDULTRASLOW variable. 
Instead of changing SDEXTRASLOW variable to a slower speed,  the new
SDULTRASLOW is used for rigidbot panel.
 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage 6f9e9c0e4f Cleaning up, getting rid of the fake encoder count variable. 2016-02-07 07:58:52 -06:00
Ruwan J Egoda Gamage becbfe1065 Fixing Rigidbot LCD Panel Support 2016-02-07 07:58:52 -06:00
esenapaj 4882a7eded more suitable display format for delta printer 2016-01-29 18:38:25 +09:00
esenapaj d7272e3f36 Merge pull request #3 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-01-29 05:43:22 +09:00
esenapaj 9ed1275a37 Merge pull request #1 from MarlinFirmware/RCBugFix 
Rc bug fix
 2016-01-29 05:40:33 +09:00
Scott Lahteine 62bad1b60f Merge pull request #2848 from japzi/RCBugFix 
Fixing Rigidbot LCD Panel Support
 2016-01-26 17:30:12 -08:00
esenapaj 59d345a3dd Update Configuration.h 2016-01-22 07:27:11 -06:00
esenapaj b8f0c8a4c7 Update Configuration.h 2016-01-22 07:27:11 -06:00
esenapaj df0d599c79 Update Configuration.h 2016-01-22 07:27:11 -06:00
esenapaj a366697649 Update Configuration.h 2016-01-22 07:27:11 -06:00
Richard Wackerbarth 7c94c83765 Repair formula mangled by PR#1319 in Jan 2015 2016-01-15 10:06:27 -06:00
Naruto-kyun 2932602643 Update stepper.cpp 
Forgot Z2_MIN_PIN
 2016-01-15 16:50:43 +01:00
Ruwan J Egoda Gamage 06555febdd Using SET_INPUT instead of pinMode 2015-12-24 12:12:25 -05:00
esenapaj 8d2aa2368d Update Configuration_adv.h 2015-12-23 08:16:36 +09:00
esenapaj 0de5fcad0a Update Configuration_adv.h 2015-12-23 08:16:06 +09:00
esenapaj 1403b9acc0 Update Configuration_adv.h 2015-12-23 08:15:20 +09:00
esenapaj 5cf1c38ea1 Update Configuration_adv.h 2015-12-23 08:12:54 +09:00
esenapaj 04ab61bf40 Update Configuration_adv.h 2015-12-23 08:12:28 +09:00
esenapaj 39c62fbd6f Update Configuration_adv.h 2015-12-23 08:12:04 +09:00